The traditional way to use a pool robot is to keep it dry-docked and charging, then drop it into the pool only when you need it. Fish it out at the end of the run, clean the filter basket, and repeat.
An alternative may appeal to lazier pool owners: Drop the robot in the pool and leave it there for a week or two, let it run on a repeating schedule, then clean it out only when the battery is dead.
The trick with this strategy is that few pool robots have a battery big enough to allow for more than one or two thorough cleanings. But with its new M1-AI series, iGarden drops a massive 12,500 mAh battery into its sleek pool bot, allowing up to nine hours of running time in floor-only operation. (It can also do walls and waterline, of course, but that will eat up more of the juice.) The robot also includes cameras that use an AI-powered algorithm to actively scour for debris. In standard mode, the robot first follows an S-shaped path, then it fires up the cams to hunt down anything it missed, making for even more effective cleaning.
The traditional way to use a pool robot is to keep it dry-docked and charging, then drop it into the pool only when you need it. Fish it out at the end of the run, clean the filter basket, and repeat.
An alternative may appeal to lazier pool owners: Drop the robot in the pool and leave it there for a week or two, let it run on a repeating schedule, then clean it out only when the battery is dead.
The trick with this strategy is that few pool robots have a battery big enough to allow for more than one or two thorough cleanings. But with its new M1-AI series, iGarden drops a massive 12,500 mAh battery into its sleek pool bot, allowing up to nine hours of running time in floor-only operation. (It can also do walls and waterline, of course, but that will eat up more of the juice.) The robot also includes cameras that use an AI-powered algorithm to actively scour for debris. In standard mode, the robot first follows an S-shaped path, then it fires up the cams to hunt down anything it missed, making for even more effective cleaning.
#PoolCleaning #Robot #Budget #Backyardbuying guides,shopping,smart home,robots,backyard,home,yardware upgrade">The Right Pool-Cleaning Robot for Every Budget and Backyard
This robot has everything: near-perfect cleaning capabilities (including floors, walls, and waterline), a powerful battery with six hours of charge under the water, AI-powered debris detection, and a solid mobile app. It also has the ability to skim the surface of the pool. When finished cleaning, the AquaSense 2 Ultra floats, so collecting it is just a matter of grabbing it from the comfort of the deck. After a quick cleanup, drop the robot on the included charging stand to juice it back up, no cables required.
What’s not to like? Only two things, really. Monstrous cleaning ability requires a monstrous chassis, and to say the 29-pound Beatbot AquaSense 2 Ultra is unwieldy would be an understatement. Hauling this robot out of the water can be a chore, so work on your forearm curls if you plan to purchase one.
There’s also the price point: At around $3,000, it’s pretty much the most expensive battery-powered pool robot on the market, though plenty of competitors are at least in the ballpark. If your budget’s tighter, you can get most of the same coverage from Beatbot’s Sora 70, which sells for just $1,499.
Pool-Cleaning Robot With the Best Battery Life
iGarden
Robotic Pool Cleaner M1-AI 90
The traditional way to use a pool robot is to keep it dry-docked and charging, then drop it into the pool only when you need it. Fish it out at the end of the run, clean the filter basket, and repeat.
An alternative may appeal to lazier pool owners: Drop the robot in the pool and leave it there for a week or two, let it run on a repeating schedule, then clean it out only when the battery is dead.
The trick with this strategy is that few pool robots have a battery big enough to allow for more than one or two thorough cleanings. But with its new M1-AI series, iGarden drops a massive 12,500 mAh battery into its sleek pool bot, allowing up to nine hours of running time in floor-only operation. (It can also do walls and waterline, of course, but that will eat up more of the juice.) The robot also includes cameras that use an AI-powered algorithm to actively scour for debris. In standard mode, the robot first follows an S-shaped path, then it fires up the cams to hunt down anything it missed, making for even more effective cleaning.
2015,Apartment,Bandra West,Bollywood,Bollywood News,Bought,Home,House,News,Rs 2.88 Crore,Rs 3.50 Crore,Salman Khan,Sells">Salman Khan sells Bandra west apartment for Rs 3.50 crore, bought for Rs 2.88 crore in 2015
Salman Khan has sold his residential apartment in Mumbai’s Bandra West for Rs.3.50 crore, according to property registration documents accessed by CRE Matrix. The actor had originally purchased the property in 2015 for ₹2.88 crore, making the latest transaction another notable real estate deal involving a Bollywood celebrity.
Salman Khan sells Bandra west apartment for Rs 3.50 crore, bought for Rs 2.88 crore in 2015
As per the registered documents, the apartment is located in Shiv-Asthan Heights, a residential building in Bandra West, one of Mumbai’s most sought-after neighbourhoods. The sale was officially registered on July 9, 2026.
The property has a carpet area of 758 square feet and comes with two dedicated car parking spaces. Based on the transaction value, the apartment was sold at an approximate rate of Rs.46,000 per square foot on the carpet area, according to the registration records.
The apartment has been jointly purchased by Munira Akberali Dandawala, Mahdiali Akberali Dandawala, and Zehra Mahdiali Dandawala. The property documents further reveal that the transaction attracted a stamp duty of Rs.21 lakh, while the registration fee amounted to Rs.30,000.
The deal reflects the continued demand for premium residential properties in Bandra West, a locality known for its upscale housing and popularity among celebrities and high-profile residents. Salman Khan has long been associated with the Bandra area, where he resides with his family.
While the registration documents provide details of the transaction, neither Salman Khan nor the homebuyers were available for comment regarding the sale at the time of reporting.
The property transaction adds to the list of celebrity real estate deals recorded in Mumbai this year, with Bandra West continuing to remain one of the city’s most active and premium residential markets for high-value property transactions.
Naturally, the AstroRinse also needs a power supply, so if you don’t have a standard electrical outlet near your hose spigot, you’ll need another extension cord solution here. The unit must be level to run properly, and it features adjustable feet and a built-in spirit level to help you achieve that.
All told, you’ll need to carefully consider where you’re going to place the AstroRinse, ensuring you have access to water, power, and drainage—and that the location isn’t too far from the pool. Since the AquaSense X robot itself weighs 29 pounds (and more when freshly pulled from the water), you probably don’t want to haul the thing halfway across the yard to clean and charge it. Unfortunately, given the availability of the above three services in my backyard, that’s exactly what I had to do.
A Familiar Friend in the Water
The Beatbot AquaSense X robot is nearly identical in appearance to the Beatbot AquaSense 2 Ultra except for some changes to the basket design (which is a single piece here instead of two). Setting it up is far simpler than the AstroRinse.
Physical configuration involves installing two side brushes—these are used only by the skimmer function—but this is a fairly quick affair. Once the brushes are attached, the robot must be set on top of the AstroRinse cleaner so the two devices can be wirelessly paired together. (The quick start guide lays out the particular button presses you must do to complete this process; don’t lose it.) Lastly, the system must then be paired to the Beatbot mobile app; you’ll need Bluetooth and a 2.4 GHz or 5 GHz Wi-Fi connection to complete this task. One tiny hiccup I encountered: After completing all this work, both devices downloaded firmware updates, which promptly broke their pairing connection. It was easy to reestablish, however, by simply repeating the pairing process.
Video: Chris Null
After a full charge, I put the cleaner through its paces in the pool on both the floor and the surface, and as expected, I saw no real difference in performance against the AquaSense 2 Ultra. During floor testing with both organic and synthetic debris, the device picked up an average of 97 percent of the test material, doing exceptionally well on steps and platforms. On the surface, the unit was predictably middling to awful, collecting less than half of floating debris and sinking most of the rest. The unit is just too slow to collect much material on the surface, even though its spinning side brushes help, to a small extent, to pull leaves into its maw.
On the floor of the pool, maximum running time is about 41/2 hours, courtesy of a 13,400 mAh battery—the same as the battery on the AquaSense 2 Ultra.
ScreenshotBeatbot app via Chris Null
As with other AquaSense robots, a bevy of operating modes are available in the Beatbot app, letting you choose from dozens of potential combinations of floor, wall, waterline, and surface cleaning, each with up to two runs per zone and with various running times. An AI Quick Mode activates the onboard camera to allow the robot to actively search for debris instead of encountering it randomly; it’s good for a quick clean when there’s not much to pick up but more than you can easily fetch with a net.
Again, not much of this is any different from how the AquaSense 2 Ultra behaves, and aside from the poor surface performance, it works outstandingly well.
Charging and Cleaning
On to the main event: cleanup. After each run, the AquaSense X parked itself at the waterline to await retrieval, and I dutifully lugged it across the pool deck to where I had the AstroRinse station set up. While it can take a little trial and error to get the robot seated in just the right spot, once you do, the cleaning system kicks in automatically within a few seconds.
Video: Chris Null
As the rinsing system starts up, the top-mounted arm swings into place and connects with the mouth the robot uses for surface skimming. Then, a high-pressure stream of water (sounding quite loud) begins blasting from the arm and into the filter basket, which is positioned directly below this opening. The water spray runs uninterrupted for three minutes before the arm swings back and the system shuts off. (A quick mode, which runs for one minute, can also be selected in the app.) After that, the arm retracts and the unit is done. Debris is captured in a net-covered basket built into the base of the cleaning station. Any remaining water drains out through a mesh screen at the very bottom of the unit.
Physical configuration involves installing two side brushes—these are used only by the skimmer function—but this is a fairly quick affair. Once the brushes are attached, the robot must be set on top of the AstroRinse cleaner so the two devices can be wirelessly paired together. (The quick start guide lays out the particular button presses you must do to complete this process; don’t lose it.) Lastly, the system must then be paired to the Beatbot mobile app; you’ll need Bluetooth and a 2.4 GHz or 5 GHz Wi-Fi connection to complete this task. One tiny hiccup I encountered: After completing all this work, both devices downloaded firmware updates, which promptly broke their pairing connection. It was easy to reestablish, however, by simply repeating the pairing process.
Video: Chris Null
After a full charge, I put the cleaner through its paces in the pool on both the floor and the surface, and as expected, I saw no real difference in performance against the AquaSense 2 Ultra. During floor testing with both organic and synthetic debris, the device picked up an average of 97 percent of the test material, doing exceptionally well on steps and platforms. On the surface, the unit was predictably middling to awful, collecting less than half of floating debris and sinking most of the rest. The unit is just too slow to collect much material on the surface, even though its spinning side brushes help, to a small extent, to pull leaves into its maw.
On the floor of the pool, maximum running time is about 41/2 hours, courtesy of a 13,400 mAh battery—the same as the battery on the AquaSense 2 Ultra.
ScreenshotBeatbot app via Chris Null
As with other AquaSense robots, a bevy of operating modes are available in the Beatbot app, letting you choose from dozens of potential combinations of floor, wall, waterline, and surface cleaning, each with up to two runs per zone and with various running times. An AI Quick Mode activates the onboard camera to allow the robot to actively search for debris instead of encountering it randomly; it’s good for a quick clean when there’s not much to pick up but more than you can easily fetch with a net.
Again, not much of this is any different from how the AquaSense 2 Ultra behaves, and aside from the poor surface performance, it works outstandingly well.
Charging and Cleaning
On to the main event: cleanup. After each run, the AquaSense X parked itself at the waterline to await retrieval, and I dutifully lugged it across the pool deck to where I had the AstroRinse station set up. While it can take a little trial and error to get the robot seated in just the right spot, once you do, the cleaning system kicks in automatically within a few seconds.
Video: Chris Null
As the rinsing system starts up, the top-mounted arm swings into place and connects with the mouth the robot uses for surface skimming. Then, a high-pressure stream of water (sounding quite loud) begins blasting from the arm and into the filter basket, which is positioned directly below this opening. The water spray runs uninterrupted for three minutes before the arm swings back and the system shuts off. (A quick mode, which runs for one minute, can also be selected in the app.) After that, the arm retracts and the unit is done. Debris is captured in a net-covered basket built into the base of the cleaning station. Any remaining water drains out through a mesh screen at the very bottom of the unit.
Photograph: Chris Null
#Pool #Robot #Cleans #Pooland #Cleansshopping,review,reviews,robots,home,outdoors">This Pool Robot Cleans the Pool—and Then Cleans Itself
Photograph: Chris Null
Naturally, the AstroRinse also needs a power supply, so if you don’t have a standard electrical outlet near your hose spigot, you’ll need another extension cord solution here. The unit must be level to run properly, and it features adjustable feet and a built-in spirit level to help you achieve that.
All told, you’ll need to carefully consider where you’re going to place the AstroRinse, ensuring you have access to water, power, and drainage—and that the location isn’t too far from the pool. Since the AquaSense X robot itself weighs 29 pounds (and more when freshly pulled from the water), you probably don’t want to haul the thing halfway across the yard to clean and charge it. Unfortunately, given the availability of the above three services in my backyard, that’s exactly what I had to do.
A Familiar Friend in the Water
The Beatbot AquaSense X robot is nearly identical in appearance to the Beatbot AquaSense 2 Ultra except for some changes to the basket design (which is a single piece here instead of two). Setting it up is far simpler than the AstroRinse.
Physical configuration involves installing two side brushes—these are used only by the skimmer function—but this is a fairly quick affair. Once the brushes are attached, the robot must be set on top of the AstroRinse cleaner so the two devices can be wirelessly paired together. (The quick start guide lays out the particular button presses you must do to complete this process; don’t lose it.) Lastly, the system must then be paired to the Beatbot mobile app; you’ll need Bluetooth and a 2.4 GHz or 5 GHz Wi-Fi connection to complete this task. One tiny hiccup I encountered: After completing all this work, both devices downloaded firmware updates, which promptly broke their pairing connection. It was easy to reestablish, however, by simply repeating the pairing process.
Video: Chris Null
After a full charge, I put the cleaner through its paces in the pool on both the floor and the surface, and as expected, I saw no real difference in performance against the AquaSense 2 Ultra. During floor testing with both organic and synthetic debris, the device picked up an average of 97 percent of the test material, doing exceptionally well on steps and platforms. On the surface, the unit was predictably middling to awful, collecting less than half of floating debris and sinking most of the rest. The unit is just too slow to collect much material on the surface, even though its spinning side brushes help, to a small extent, to pull leaves into its maw.
On the floor of the pool, maximum running time is about 41/2 hours, courtesy of a 13,400 mAh battery—the same as the battery on the AquaSense 2 Ultra.
ScreenshotBeatbot app via Chris Null
As with other AquaSense robots, a bevy of operating modes are available in the Beatbot app, letting you choose from dozens of potential combinations of floor, wall, waterline, and surface cleaning, each with up to two runs per zone and with various running times. An AI Quick Mode activates the onboard camera to allow the robot to actively search for debris instead of encountering it randomly; it’s good for a quick clean when there’s not much to pick up but more than you can easily fetch with a net.
Again, not much of this is any different from how the AquaSense 2 Ultra behaves, and aside from the poor surface performance, it works outstandingly well.
Charging and Cleaning
On to the main event: cleanup. After each run, the AquaSense X parked itself at the waterline to await retrieval, and I dutifully lugged it across the pool deck to where I had the AstroRinse station set up. While it can take a little trial and error to get the robot seated in just the right spot, once you do, the cleaning system kicks in automatically within a few seconds.
Video: Chris Null
As the rinsing system starts up, the top-mounted arm swings into place and connects with the mouth the robot uses for surface skimming. Then, a high-pressure stream of water (sounding quite loud) begins blasting from the arm and into the filter basket, which is positioned directly below this opening. The water spray runs uninterrupted for three minutes before the arm swings back and the system shuts off. (A quick mode, which runs for one minute, can also be selected in the app.) After that, the arm retracts and the unit is done. Debris is captured in a net-covered basket built into the base of the cleaning station. Any remaining water drains out through a mesh screen at the very bottom of the unit.
“Some stuff I did myself, like this one. The Svarva lamp we made with the design group Front for the PS 2009 collection. They were quite newly established and so we did an armchair and this lamp. The desire was to do a wooden turned lamp, but you should also be able to twist it, articulate it.”
“I felt that that would be very difficult to do. Along with a colleague in lighting at the time, I went to Hungary to this factory that was producing lamps for us. It was all metal tubes that they were doing, so we were a little bit hesitant whether they should be able to solve this. But they made some mock-ups based on the designer drawings. So we went there to have a look, and it was standing there. It was this floor lamp, and also a table lamp where the wooden beads were going in a circle and then up, like a snake.”
“What we didn’t know was that next to the lamp factory was this factory that was doing the turned wooden beads, the small individual pieces that we put together. None of us knew that. It was just pure serendipity. So they were turning these wooden beads, and the lamp factory was putting them on the metal tubes, just like on a necklace. They had very little to do, so they were happy to get the business.”
A Sinka Cabinet resides in Ejdemo’s hallway.
Courtesy of Johan Ejdemo
PS Sinka Cabinet
“I have another favorite from that PS 2009 collection, it’s in my hallway. The PS Sinka, with the small drawers with a wooden base. Sinka means “dovetail” in Swedish, so the name explaining that construction.”
“But the problem we had with this one was the packaging volume was too big. So what we did was each drawer is slightly shallower. So four drawers stack into each other. And four more drawers stack. There’s a little bit of a stopper in the back when you push them in, so they stop evenly at the front. There’s also a hidden compartment behind the smallest drawer. Really good drawers for all this stuff that is just lying around and getting in the way. In the top one I have all my keys that I no longer know where they go.”
PS Jonsberg Vases
“I have this vase from the PS collection to hold the cables [on my Samsung Serif TV]. It was a set, the Jonsberg vases by Hella Jongerius. There were four of them in different ceramic techniques. I had all four, but the terracotta one broke, which was a pity.” [It certainly is. These $39 vases now sell secondhand for $1,700 for a full set.]
“They’re inspired by different regions, and the different techniques are beautiful. I use the big black one for toilet paper in one bathroom. It’s not disrespect for the design. It’s just such a good design to stand there, and it makes the bathroom beautiful, and it can fit the toilet roll. So, why have something like an ugly stick? It’s nice for that.”
Pax Wardrobes
“Pax. We have to mention Pax. I have Pax wardrobes in a few rooms, but also I’m a little bit peculiar. Like in the kitchen, these veneer doors have been sanded and hand-painted by me, just to make them fit my house, in my space. I repaint them sometimes.”
Chipped Spraka pepper mills.
Courtesy of Johan Ejdemo
Spraka Pepper Mills
“I have these pepper mills. One for white pepper, one for black pepper. That was also in a PS collection. We did these with Marcus Arvonen. These pepper mills are beautiful, and these have been around for, like, 20 years as well. They are pretty tall. A smaller version came later on, but I like these.”
“They have their chips, yes, but this just makes them nicer. It’s age. They’ve been around and are used every day. Everything has a little bit of imperfection. You can spend your whole life bothering about that, but there should be some imperfection in life. Fix it? Then something else needs fixing. It just moves. Leave it, be proud.”
Where’s the Billy Bookcase or Kallax?
“I don’t have a Billy in the house now. But there have been! Kallax? I have owned many. Brilliant piece. Really good for vinyl, because that’s the time they come from. I listen to a lot of vinyl.”
“Some stuff I did myself, like this one. The Svarva lamp we made with the design group Front for the PS 2009 collection. They were quite newly established and so we did an armchair and this lamp. The desire was to do a wooden turned lamp, but you should also be able to twist it, articulate it.”
“I felt that that would be very difficult to do. Along with a colleague in lighting at the time, I went to Hungary to this factory that was producing lamps for us. It was all metal tubes that they were doing, so we were a little bit hesitant whether they should be able to solve this. But they made some mock-ups based on the designer drawings. So we went there to have a look, and it was standing there. It was this floor lamp, and also a table lamp where the wooden beads were going in a circle and then up, like a snake.”
“What we didn’t know was that next to the lamp factory was this factory that was doing the turned wooden beads, the small individual pieces that we put together. None of us knew that. It was just pure serendipity. So they were turning these wooden beads, and the lamp factory was putting them on the metal tubes, just like on a necklace. They had very little to do, so they were happy to get the business.”
A Sinka Cabinet resides in Ejdemo’s hallway.
Courtesy of Johan Ejdemo
PS Sinka Cabinet
“I have another favorite from that PS 2009 collection, it’s in my hallway. The PS Sinka, with the small drawers with a wooden base. Sinka means “dovetail” in Swedish, so the name explaining that construction.”
“But the problem we had with this one was the packaging volume was too big. So what we did was each drawer is slightly shallower. So four drawers stack into each other. And four more drawers stack. There’s a little bit of a stopper in the back when you push them in, so they stop evenly at the front. There’s also a hidden compartment behind the smallest drawer. Really good drawers for all this stuff that is just lying around and getting in the way. In the top one I have all my keys that I no longer know where they go.”
PS Jonsberg Vases
“I have this vase from the PS collection to hold the cables [on my Samsung Serif TV]. It was a set, the Jonsberg vases by Hella Jongerius. There were four of them in different ceramic techniques. I had all four, but the terracotta one broke, which was a pity.” [It certainly is. These $39 vases now sell secondhand for $1,700 for a full set.]
“They’re inspired by different regions, and the different techniques are beautiful. I use the big black one for toilet paper in one bathroom. It’s not disrespect for the design. It’s just such a good design to stand there, and it makes the bathroom beautiful, and it can fit the toilet roll. So, why have something like an ugly stick? It’s nice for that.”
Pax Wardrobes
“Pax. We have to mention Pax. I have Pax wardrobes in a few rooms, but also I’m a little bit peculiar. Like in the kitchen, these veneer doors have been sanded and hand-painted by me, just to make them fit my house, in my space. I repaint them sometimes.”
Chipped Spraka pepper mills.
Courtesy of Johan Ejdemo
Spraka Pepper Mills
“I have these pepper mills. One for white pepper, one for black pepper. That was also in a PS collection. We did these with Marcus Arvonen. These pepper mills are beautiful, and these have been around for, like, 20 years as well. They are pretty tall. A smaller version came later on, but I like these.”
“They have their chips, yes, but this just makes them nicer. It’s age. They’ve been around and are used every day. Everything has a little bit of imperfection. You can spend your whole life bothering about that, but there should be some imperfection in life. Fix it? Then something else needs fixing. It just moves. Leave it, be proud.”
Where’s the Billy Bookcase or Kallax?
“I don’t have a Billy in the house now. But there have been! Kallax? I have owned many. Brilliant piece. Really good for vinyl, because that’s the time they come from. I listen to a lot of vinyl.”
#Ikea #Products #Companys #Design #Chief #Personally #Ownsikea,design,home,furniture,household,interviews">These Are the 12 Ikea Products the Company’s Design Chief Personally Owns
The Svarva lamp can be twisted into different shapes.
Courtesy of Johan Ejdemo
PS Svarva Floor Lamp
“Some stuff I did myself, like this one. The Svarva lamp we made with the design group Front for the PS 2009 collection. They were quite newly established and so we did an armchair and this lamp. The desire was to do a wooden turned lamp, but you should also be able to twist it, articulate it.”
“I felt that that would be very difficult to do. Along with a colleague in lighting at the time, I went to Hungary to this factory that was producing lamps for us. It was all metal tubes that they were doing, so we were a little bit hesitant whether they should be able to solve this. But they made some mock-ups based on the designer drawings. So we went there to have a look, and it was standing there. It was this floor lamp, and also a table lamp where the wooden beads were going in a circle and then up, like a snake.”
“What we didn’t know was that next to the lamp factory was this factory that was doing the turned wooden beads, the small individual pieces that we put together. None of us knew that. It was just pure serendipity. So they were turning these wooden beads, and the lamp factory was putting them on the metal tubes, just like on a necklace. They had very little to do, so they were happy to get the business.”
A Sinka Cabinet resides in Ejdemo’s hallway.
Courtesy of Johan Ejdemo
PS Sinka Cabinet
“I have another favorite from that PS 2009 collection, it’s in my hallway. The PS Sinka, with the small drawers with a wooden base. Sinka means “dovetail” in Swedish, so the name explaining that construction.”
“But the problem we had with this one was the packaging volume was too big. So what we did was each drawer is slightly shallower. So four drawers stack into each other. And four more drawers stack. There’s a little bit of a stopper in the back when you push them in, so they stop evenly at the front. There’s also a hidden compartment behind the smallest drawer. Really good drawers for all this stuff that is just lying around and getting in the way. In the top one I have all my keys that I no longer know where they go.”
PS Jonsberg Vases
“I have this vase from the PS collection to hold the cables [on my Samsung Serif TV]. It was a set, the Jonsberg vases by Hella Jongerius. There were four of them in different ceramic techniques. I had all four, but the terracotta one broke, which was a pity.” [It certainly is. These $39 vases now sell secondhand for $1,700 for a full set.]
“They’re inspired by different regions, and the different techniques are beautiful. I use the big black one for toilet paper in one bathroom. It’s not disrespect for the design. It’s just such a good design to stand there, and it makes the bathroom beautiful, and it can fit the toilet roll. So, why have something like an ugly stick? It’s nice for that.”
Pax Wardrobes
“Pax. We have to mention Pax. I have Pax wardrobes in a few rooms, but also I’m a little bit peculiar. Like in the kitchen, these veneer doors have been sanded and hand-painted by me, just to make them fit my house, in my space. I repaint them sometimes.”
Chipped Spraka pepper mills.
Courtesy of Johan Ejdemo
Spraka Pepper Mills
“I have these pepper mills. One for white pepper, one for black pepper. That was also in a PS collection. We did these with Marcus Arvonen. These pepper mills are beautiful, and these have been around for, like, 20 years as well. They are pretty tall. A smaller version came later on, but I like these.”
“They have their chips, yes, but this just makes them nicer. It’s age. They’ve been around and are used every day. Everything has a little bit of imperfection. You can spend your whole life bothering about that, but there should be some imperfection in life. Fix it? Then something else needs fixing. It just moves. Leave it, be proud.”
Where’s the Billy Bookcase or Kallax?
“I don’t have a Billy in the house now. But there have been! Kallax? I have owned many. Brilliant piece. Really good for vinyl, because that’s the time they come from. I listen to a lot of vinyl.”
Home,House,Kalki Koechlin,Mumbai property,Mumbai Rest Estate,News,Real Estate,Real Estate Mumbai">Kalki Koechlin sells Mumbai apartment for Rs 2.55 crores after nearly a decade: Report
Actor Kalki Koechlin has sold an apartment in Mumbai’s Andheri West for Rs 2.55 crores, according to property registration documents reviewed by Square Yards. The transaction adds to the growing list of real estate deals involving film industry personalities in recent months.
Kalki Koechlin sells Mumbai apartment for Rs 2.55 crores after nearly a decade: Report
The apartment is located in Varsova Kiran Co-operative Housing Society Ltd, a residential complex situated in the popular Andheri West locality. As per the registration documents, the property has a carpet area of 1,230 square feet.
The buyer has been identified as Yuvraj Ahuja. The sale transaction was officially registered on April 21, 2026.
Documents reviewed by Square Yards show that stamp duty worth Rs 16.08 lakhs was paid for the transaction, along with registration charges of Rs 30,000.
The deal also highlights the appreciation in the property’s value over the years. According to the report, Kalki had purchased the apartment in December 2015 for Rs 1.95 crore. With the latest transaction valued at Rs 2.55 crore, the actor is estimated to have gained approximately Rs 60 lakh on the investment.
![These Are the 12 Ikea Products the Company’s Design Chief Personally OwnsThe Svarva lamp can be twisted into different shapes.
Courtesy of Johan EjdemoPS Svarva Floor Lamp“Some stuff I did myself, like this one. The Svarva lamp we made with the design group Front for the PS 2009 collection. They were quite newly established and so we did an armchair and this lamp. The desire was to do a wooden turned lamp, but you should also be able to twist it, articulate it.”“I felt that that would be very difficult to do. Along with a colleague in lighting at the time, I went to Hungary to this factory that was producing lamps for us. It was all metal tubes that they were doing, so we were a little bit hesitant whether they should be able to solve this. But they made some mock-ups based on the designer drawings. So we went there to have a look, and it was standing there. It was this floor lamp, and also a table lamp where the wooden beads were going in a circle and then up, like a snake.”“What we didn’t know was that next to the lamp factory was this factory that was doing the turned wooden beads, the small individual pieces that we put together. None of us knew that. It was just pure serendipity. So they were turning these wooden beads, and the lamp factory was putting them on the metal tubes, just like on a necklace. They had very little to do, so they were happy to get the business.”A Sinka Cabinet resides in Ejdemo’s hallway.
Courtesy of Johan EjdemoPS Sinka Cabinet“I have another favorite from that PS 2009 collection, it’s in my hallway. The PS Sinka, with the small drawers with a wooden base. Sinka means “dovetail” in Swedish, so the name explaining that construction.”“But the problem we had with this one was the packaging volume was too big. So what we did was each drawer is slightly shallower. So four drawers stack into each other. And four more drawers stack. There’s a little bit of a stopper in the back when you push them in, so they stop evenly at the front. There’s also a hidden compartment behind the smallest drawer. Really good drawers for all this stuff that is just lying around and getting in the way. In the top one I have all my keys that I no longer know where they go.”PS Jonsberg Vases“I have this vase from the PS collection to hold the cables [on my Samsung Serif TV]. It was a set, the Jonsberg vases by Hella Jongerius. There were four of them in different ceramic techniques. I had all four, but the terracotta one broke, which was a pity.” [It certainly is. These vases now sell secondhand for ,700 for a full set.]“They’re inspired by different regions, and the different techniques are beautiful. I use the big black one for toilet paper in one bathroom. It’s not disrespect for the design. It’s just such a good design to stand there, and it makes the bathroom beautiful, and it can fit the toilet roll. So, why have something like an ugly stick? It’s nice for that.”Pax Wardrobes“Pax. We have to mention Pax. I have Pax wardrobes in a few rooms, but also I’m a little bit peculiar. Like in the kitchen, these veneer doors have been sanded and hand-painted by me, just to make them fit my house, in my space. I repaint them sometimes.”Chipped Spraka pepper mills.
Courtesy of Johan EjdemoSpraka Pepper Mills“I have these pepper mills. One for white pepper, one for black pepper. That was also in a PS collection. We did these with Marcus Arvonen. These pepper mills are beautiful, and these have been around for, like, 20 years as well. They are pretty tall. A smaller version came later on, but I like these.”“They have their chips, yes, but this just makes them nicer. It’s age. They’ve been around and are used every day. Everything has a little bit of imperfection. You can spend your whole life bothering about that, but there should be some imperfection in life. Fix it? Then something else needs fixing. It just moves. Leave it, be proud.”Where’s the Billy Bookcase or Kallax?“I don’t have a Billy in the house now. But there have been! Kallax? I have owned many. Brilliant piece. Really good for vinyl, because that’s the time they come from. I listen to a lot of vinyl.”#Ikea #Products #Companys #Design #Chief #Personally #Ownsikea,design,home,furniture,household,interviews](https://i2.wp.com/media.wired.com/photos/6a33ff12acc128b064d51d9c/master/w_1600%2Cc_limit/IKEA%2520PS%2520SVARVA%25202.jpg?ssl=1 "These Are the 12 Ikea Products the Company’s Design Chief Personally OwnsThe Svarva lamp can be twisted into different shapes.
Courtesy of Johan EjdemoPS Svarva Floor Lamp“Some stuff I did myself, like this one. The Svarva lamp we made with the design group Front for the PS 2009 collection. They were quite newly established and so we did an armchair and this lamp. The desire was to do a wooden turned lamp, but you should also be able to twist it, articulate it.”“I felt that that would be very difficult to do. Along with a colleague in lighting at the time, I went to Hungary to this factory that was producing lamps for us. It was all metal tubes that they were doing, so we were a little bit hesitant whether they should be able to solve this. But they made some mock-ups based on the designer drawings. So we went there to have a look, and it was standing there. It was this floor lamp, and also a table lamp where the wooden beads were going in a circle and then up, like a snake.”“What we didn’t know was that next to the lamp factory was this factory that was doing the turned wooden beads, the small individual pieces that we put together. None of us knew that. It was just pure serendipity. So they were turning these wooden beads, and the lamp factory was putting them on the metal tubes, just like on a necklace. They had very little to do, so they were happy to get the business.”A Sinka Cabinet resides in Ejdemo’s hallway.
Courtesy of Johan EjdemoPS Sinka Cabinet“I have another favorite from that PS 2009 collection, it’s in my hallway. The PS Sinka, with the small drawers with a wooden base. Sinka means “dovetail” in Swedish, so the name explaining that construction.”“But the problem we had with this one was the packaging volume was too big. So what we did was each drawer is slightly shallower. So four drawers stack into each other. And four more drawers stack. There’s a little bit of a stopper in the back when you push them in, so they stop evenly at the front. There’s also a hidden compartment behind the smallest drawer. Really good drawers for all this stuff that is just lying around and getting in the way. In the top one I have all my keys that I no longer know where they go.”PS Jonsberg Vases“I have this vase from the PS collection to hold the cables [on my Samsung Serif TV]. It was a set, the Jonsberg vases by Hella Jongerius. There were four of them in different ceramic techniques. I had all four, but the terracotta one broke, which was a pity.” [It certainly is. These vases now sell secondhand for ,700 for a full set.]“They’re inspired by different regions, and the different techniques are beautiful. I use the big black one for toilet paper in one bathroom. It’s not disrespect for the design. It’s just such a good design to stand there, and it makes the bathroom beautiful, and it can fit the toilet roll. So, why have something like an ugly stick? It’s nice for that.”Pax Wardrobes“Pax. We have to mention Pax. I have Pax wardrobes in a few rooms, but also I’m a little bit peculiar. Like in the kitchen, these veneer doors have been sanded and hand-painted by me, just to make them fit my house, in my space. I repaint them sometimes.”Chipped Spraka pepper mills.
Courtesy of Johan EjdemoSpraka Pepper Mills“I have these pepper mills. One for white pepper, one for black pepper. That was also in a PS collection. We did these with Marcus Arvonen. These pepper mills are beautiful, and these have been around for, like, 20 years as well. They are pretty tall. A smaller version came later on, but I like these.”“They have their chips, yes, but this just makes them nicer. It’s age. They’ve been around and are used every day. Everything has a little bit of imperfection. You can spend your whole life bothering about that, but there should be some imperfection in life. Fix it? Then something else needs fixing. It just moves. Leave it, be proud.”Where’s the Billy Bookcase or Kallax?“I don’t have a Billy in the house now. But there have been! Kallax? I have owned many. Brilliant piece. Really good for vinyl, because that’s the time they come from. I listen to a lot of vinyl.”#Ikea #Products #Companys #Design #Chief #Personally #Ownsikea,design,home,furniture,household,interviews")
