The traditional way to use a pool robot is to keep it dry-docked and charging, then drop it into the pool only when you need it. Fish it out at the end of the run, clean the filter basket, and repeat.
An alternative may appeal to lazier pool owners: Drop the robot in the pool and leave it there for a week or two, let it run on a repeating schedule, then clean it out only when the battery is dead.
The trick with this strategy is that few pool robots have a battery big enough to allow for more than one or two thorough cleanings. But with its new M1-AI series, iGarden drops a massive 12,500 mAh battery into its sleek pool bot, allowing up to nine hours of running time in floor-only operation. (It can also do walls and waterline, of course, but that will eat up more of the juice.) The robot also includes cameras that use an AI-powered algorithm to actively scour for debris. In standard mode, the robot first follows an S-shaped path, then it fires up the cams to hunt down anything it missed, making for even more effective cleaning.
The traditional way to use a pool robot is to keep it dry-docked and charging, then drop it into the pool only when you need it. Fish it out at the end of the run, clean the filter basket, and repeat.
An alternative may appeal to lazier pool owners: Drop the robot in the pool and leave it there for a week or two, let it run on a repeating schedule, then clean it out only when the battery is dead.
The trick with this strategy is that few pool robots have a battery big enough to allow for more than one or two thorough cleanings. But with its new M1-AI series, iGarden drops a massive 12,500 mAh battery into its sleek pool bot, allowing up to nine hours of running time in floor-only operation. (It can also do walls and waterline, of course, but that will eat up more of the juice.) The robot also includes cameras that use an AI-powered algorithm to actively scour for debris. In standard mode, the robot first follows an S-shaped path, then it fires up the cams to hunt down anything it missed, making for even more effective cleaning.
#PoolCleaning #Robot #Budget #Backyardbuying guides,shopping,smart home,robots,backyard,home,yardware upgrade">The Right Pool-Cleaning Robot for Every Budget and Backyard
This robot has everything: near-perfect cleaning capabilities (including floors, walls, and waterline), a powerful battery with six hours of charge under the water, AI-powered debris detection, and a solid mobile app. It also has the ability to skim the surface of the pool. When finished cleaning, the AquaSense 2 Ultra floats, so collecting it is just a matter of grabbing it from the comfort of the deck. After a quick cleanup, drop the robot on the included charging stand to juice it back up, no cables required.
What’s not to like? Only two things, really. Monstrous cleaning ability requires a monstrous chassis, and to say the 29-pound Beatbot AquaSense 2 Ultra is unwieldy would be an understatement. Hauling this robot out of the water can be a chore, so work on your forearm curls if you plan to purchase one.
There’s also the price point: At around $3,000, it’s pretty much the most expensive battery-powered pool robot on the market, though plenty of competitors are at least in the ballpark. If your budget’s tighter, you can get most of the same coverage from Beatbot’s Sora 70, which sells for just $1,499.
Pool-Cleaning Robot With the Best Battery Life
iGarden
Robotic Pool Cleaner M1-AI 90
The traditional way to use a pool robot is to keep it dry-docked and charging, then drop it into the pool only when you need it. Fish it out at the end of the run, clean the filter basket, and repeat.
An alternative may appeal to lazier pool owners: Drop the robot in the pool and leave it there for a week or two, let it run on a repeating schedule, then clean it out only when the battery is dead.
The trick with this strategy is that few pool robots have a battery big enough to allow for more than one or two thorough cleanings. But with its new M1-AI series, iGarden drops a massive 12,500 mAh battery into its sleek pool bot, allowing up to nine hours of running time in floor-only operation. (It can also do walls and waterline, of course, but that will eat up more of the juice.) The robot also includes cameras that use an AI-powered algorithm to actively scour for debris. In standard mode, the robot first follows an S-shaped path, then it fires up the cams to hunt down anything it missed, making for even more effective cleaning.
Naturally, the AstroRinse also needs a power supply, so if you don’t have a standard electrical outlet near your hose spigot, you’ll need another extension cord solution here. The unit must be level to run properly, and it features adjustable feet and a built-in spirit level to help you achieve that.
All told, you’ll need to carefully consider where you’re going to place the AstroRinse, ensuring you have access to water, power, and drainage—and that the location isn’t too far from the pool. Since the AquaSense X robot itself weighs 29 pounds (and more when freshly pulled from the water), you probably don’t want to haul the thing halfway across the yard to clean and charge it. Unfortunately, given the availability of the above three services in my backyard, that’s exactly what I had to do.
A Familiar Friend in the Water
The Beatbot AquaSense X robot is nearly identical in appearance to the Beatbot AquaSense 2 Ultra except for some changes to the basket design (which is a single piece here instead of two). Setting it up is far simpler than the AstroRinse.
Physical configuration involves installing two side brushes—these are used only by the skimmer function—but this is a fairly quick affair. Once the brushes are attached, the robot must be set on top of the AstroRinse cleaner so the two devices can be wirelessly paired together. (The quick start guide lays out the particular button presses you must do to complete this process; don’t lose it.) Lastly, the system must then be paired to the Beatbot mobile app; you’ll need Bluetooth and a 2.4 GHz or 5 GHz Wi-Fi connection to complete this task. One tiny hiccup I encountered: After completing all this work, both devices downloaded firmware updates, which promptly broke their pairing connection. It was easy to reestablish, however, by simply repeating the pairing process.
Video: Chris Null
After a full charge, I put the cleaner through its paces in the pool on both the floor and the surface, and as expected, I saw no real difference in performance against the AquaSense 2 Ultra. During floor testing with both organic and synthetic debris, the device picked up an average of 97 percent of the test material, doing exceptionally well on steps and platforms. On the surface, the unit was predictably middling to awful, collecting less than half of floating debris and sinking most of the rest. The unit is just too slow to collect much material on the surface, even though its spinning side brushes help, to a small extent, to pull leaves into its maw.
On the floor of the pool, maximum running time is about 41/2 hours, courtesy of a 13,400 mAh battery—the same as the battery on the AquaSense 2 Ultra.
ScreenshotBeatbot app via Chris Null
As with other AquaSense robots, a bevy of operating modes are available in the Beatbot app, letting you choose from dozens of potential combinations of floor, wall, waterline, and surface cleaning, each with up to two runs per zone and with various running times. An AI Quick Mode activates the onboard camera to allow the robot to actively search for debris instead of encountering it randomly; it’s good for a quick clean when there’s not much to pick up but more than you can easily fetch with a net.
Again, not much of this is any different from how the AquaSense 2 Ultra behaves, and aside from the poor surface performance, it works outstandingly well.
Charging and Cleaning
On to the main event: cleanup. After each run, the AquaSense X parked itself at the waterline to await retrieval, and I dutifully lugged it across the pool deck to where I had the AstroRinse station set up. While it can take a little trial and error to get the robot seated in just the right spot, once you do, the cleaning system kicks in automatically within a few seconds.
Video: Chris Null
As the rinsing system starts up, the top-mounted arm swings into place and connects with the mouth the robot uses for surface skimming. Then, a high-pressure stream of water (sounding quite loud) begins blasting from the arm and into the filter basket, which is positioned directly below this opening. The water spray runs uninterrupted for three minutes before the arm swings back and the system shuts off. (A quick mode, which runs for one minute, can also be selected in the app.) After that, the arm retracts and the unit is done. Debris is captured in a net-covered basket built into the base of the cleaning station. Any remaining water drains out through a mesh screen at the very bottom of the unit.
Physical configuration involves installing two side brushes—these are used only by the skimmer function—but this is a fairly quick affair. Once the brushes are attached, the robot must be set on top of the AstroRinse cleaner so the two devices can be wirelessly paired together. (The quick start guide lays out the particular button presses you must do to complete this process; don’t lose it.) Lastly, the system must then be paired to the Beatbot mobile app; you’ll need Bluetooth and a 2.4 GHz or 5 GHz Wi-Fi connection to complete this task. One tiny hiccup I encountered: After completing all this work, both devices downloaded firmware updates, which promptly broke their pairing connection. It was easy to reestablish, however, by simply repeating the pairing process.
Video: Chris Null
After a full charge, I put the cleaner through its paces in the pool on both the floor and the surface, and as expected, I saw no real difference in performance against the AquaSense 2 Ultra. During floor testing with both organic and synthetic debris, the device picked up an average of 97 percent of the test material, doing exceptionally well on steps and platforms. On the surface, the unit was predictably middling to awful, collecting less than half of floating debris and sinking most of the rest. The unit is just too slow to collect much material on the surface, even though its spinning side brushes help, to a small extent, to pull leaves into its maw.
On the floor of the pool, maximum running time is about 41/2 hours, courtesy of a 13,400 mAh battery—the same as the battery on the AquaSense 2 Ultra.
ScreenshotBeatbot app via Chris Null
As with other AquaSense robots, a bevy of operating modes are available in the Beatbot app, letting you choose from dozens of potential combinations of floor, wall, waterline, and surface cleaning, each with up to two runs per zone and with various running times. An AI Quick Mode activates the onboard camera to allow the robot to actively search for debris instead of encountering it randomly; it’s good for a quick clean when there’s not much to pick up but more than you can easily fetch with a net.
Again, not much of this is any different from how the AquaSense 2 Ultra behaves, and aside from the poor surface performance, it works outstandingly well.
Charging and Cleaning
On to the main event: cleanup. After each run, the AquaSense X parked itself at the waterline to await retrieval, and I dutifully lugged it across the pool deck to where I had the AstroRinse station set up. While it can take a little trial and error to get the robot seated in just the right spot, once you do, the cleaning system kicks in automatically within a few seconds.
Video: Chris Null
As the rinsing system starts up, the top-mounted arm swings into place and connects with the mouth the robot uses for surface skimming. Then, a high-pressure stream of water (sounding quite loud) begins blasting from the arm and into the filter basket, which is positioned directly below this opening. The water spray runs uninterrupted for three minutes before the arm swings back and the system shuts off. (A quick mode, which runs for one minute, can also be selected in the app.) After that, the arm retracts and the unit is done. Debris is captured in a net-covered basket built into the base of the cleaning station. Any remaining water drains out through a mesh screen at the very bottom of the unit.
Photograph: Chris Null
#Pool #Robot #Cleans #Pooland #Cleansshopping,review,reviews,robots,home,outdoors">This Pool Robot Cleans the Pool—and Then Cleans Itself
Photograph: Chris Null
Naturally, the AstroRinse also needs a power supply, so if you don’t have a standard electrical outlet near your hose spigot, you’ll need another extension cord solution here. The unit must be level to run properly, and it features adjustable feet and a built-in spirit level to help you achieve that.
All told, you’ll need to carefully consider where you’re going to place the AstroRinse, ensuring you have access to water, power, and drainage—and that the location isn’t too far from the pool. Since the AquaSense X robot itself weighs 29 pounds (and more when freshly pulled from the water), you probably don’t want to haul the thing halfway across the yard to clean and charge it. Unfortunately, given the availability of the above three services in my backyard, that’s exactly what I had to do.
A Familiar Friend in the Water
The Beatbot AquaSense X robot is nearly identical in appearance to the Beatbot AquaSense 2 Ultra except for some changes to the basket design (which is a single piece here instead of two). Setting it up is far simpler than the AstroRinse.
Physical configuration involves installing two side brushes—these are used only by the skimmer function—but this is a fairly quick affair. Once the brushes are attached, the robot must be set on top of the AstroRinse cleaner so the two devices can be wirelessly paired together. (The quick start guide lays out the particular button presses you must do to complete this process; don’t lose it.) Lastly, the system must then be paired to the Beatbot mobile app; you’ll need Bluetooth and a 2.4 GHz or 5 GHz Wi-Fi connection to complete this task. One tiny hiccup I encountered: After completing all this work, both devices downloaded firmware updates, which promptly broke their pairing connection. It was easy to reestablish, however, by simply repeating the pairing process.
Video: Chris Null
After a full charge, I put the cleaner through its paces in the pool on both the floor and the surface, and as expected, I saw no real difference in performance against the AquaSense 2 Ultra. During floor testing with both organic and synthetic debris, the device picked up an average of 97 percent of the test material, doing exceptionally well on steps and platforms. On the surface, the unit was predictably middling to awful, collecting less than half of floating debris and sinking most of the rest. The unit is just too slow to collect much material on the surface, even though its spinning side brushes help, to a small extent, to pull leaves into its maw.
On the floor of the pool, maximum running time is about 41/2 hours, courtesy of a 13,400 mAh battery—the same as the battery on the AquaSense 2 Ultra.
ScreenshotBeatbot app via Chris Null
As with other AquaSense robots, a bevy of operating modes are available in the Beatbot app, letting you choose from dozens of potential combinations of floor, wall, waterline, and surface cleaning, each with up to two runs per zone and with various running times. An AI Quick Mode activates the onboard camera to allow the robot to actively search for debris instead of encountering it randomly; it’s good for a quick clean when there’s not much to pick up but more than you can easily fetch with a net.
Again, not much of this is any different from how the AquaSense 2 Ultra behaves, and aside from the poor surface performance, it works outstandingly well.
Charging and Cleaning
On to the main event: cleanup. After each run, the AquaSense X parked itself at the waterline to await retrieval, and I dutifully lugged it across the pool deck to where I had the AstroRinse station set up. While it can take a little trial and error to get the robot seated in just the right spot, once you do, the cleaning system kicks in automatically within a few seconds.
Video: Chris Null
As the rinsing system starts up, the top-mounted arm swings into place and connects with the mouth the robot uses for surface skimming. Then, a high-pressure stream of water (sounding quite loud) begins blasting from the arm and into the filter basket, which is positioned directly below this opening. The water spray runs uninterrupted for three minutes before the arm swings back and the system shuts off. (A quick mode, which runs for one minute, can also be selected in the app.) After that, the arm retracts and the unit is done. Debris is captured in a net-covered basket built into the base of the cleaning station. Any remaining water drains out through a mesh screen at the very bottom of the unit.
The humanoid robot market tends to be dominated by tough, hulking Terminators meant to be paraded out for some defense industry contract or another. 1X is taking a different tack for its robot. The Neo is a soft, supple robot wrapped in a 3D lattice shell. Its design is inspired by characters like Baymax, the affable robot from the Disney movie Big Hero 6. In limited quantities, early access pricing is $20,000 or $500 per month to have it in your home, though the lump sum will prioritize delivery for 2026.
The humanoid robot market tends to be dominated by tough, hulking Terminators meant to be paraded out for some defense industry contract or another. 1X is taking a different tack for its robot. The Neo is a soft, supple robot wrapped in a 3D lattice shell. Its design is inspired by characters like Baymax, the affable robot from the Disney movie Big Hero 6. In limited quantities, early access pricing is $20,000 or $500 per month to have it in your home, though the lump sum will prioritize delivery for 2026.
#Neo #Robot #Freaky #Fast #Fingersrobots,robotics,artificial intelligence">The 1X Neo Robot Has Freaky Fast Fingers
Friendly home robots have been the dream of sci-fi for a long time. Docile, helpful machines that do your laundry, take out the trash, maybe make dinner, and clean up afterward too. But if robots are going to do all that, they’re going to need some hands to make all that happen.
1X, a Norwegian-American robotics company, today revealed details about the five-finger hands attached to its soft, helpful robot companion, Neo.
The hands are built with actuators designed to replicate how tendons in the arms move human hands. 1X says this gives Neo’s hands 25 degrees of freedom of movement, which is just a little less than the 27 degrees of freedom human hands usually have. Cameras and AI smarts help sort out the broader context of what the fingers are trying to grab. It’s a dexterous mix that gives the Neo bot a very broad range of motion. 1X says the hands can grip odd shapes and detect when something is slipping out of its grip. The fingers can also move extremely quickly and hyperextend in directions human digits can’t. They also have an IP68 waterproof rating, meaning the robot can wash its own hands.
Courtesy of 1X
It’s a range that the engineers have aimed to dial in to align with what a human can actually do. Jonathan Terfurth, 1X’s director of actuators and hands, says the range of motion might even be better than a human’s, enabling it to open doors, lift heavy objects, and even plug itself in when its battery starts to die.
“You want to be able to operate with a human who has never worked or interfaced with a robot, and you still want it to be safe and compliant and soft,” Terfurth says. “Range of motion can be a bit extreme, but we try to be very close to what humans can do so that we can live in the world.”
Together, this is part of a growing ChatGPT-esque moment for robotics, where bots have gone from clumsy claw machines to capable handlers, able to gently carry fragile objects and become increasingly helpful for managing menial daily tasks and boring office chores.
The humanoid robot market tends to be dominated by tough, hulking Terminators meant to be paraded out for some defense industry contract or another. 1X is taking a different tack for its robot. The Neo is a soft, supple robot wrapped in a 3D lattice shell. Its design is inspired by characters like Baymax, the affable robot from the Disney movie Big Hero 6. In limited quantities, early access pricing is $20,000 or $500 per month to have it in your home, though the lump sum will prioritize delivery for 2026.
