×
In a Big Reversal, Zohran Mamdani Tells NYC Agencies They Can Use TikTok

In a Big Reversal, Zohran Mamdani Tells NYC Agencies They Can Use TikTok

New York City mayor Zohran Mamdani, who rode a social media-fueled campaign to Gracie Mansion, is reversing an Eric Adams–era directive barring TikTok from government-owned devices. Local agencies will now be able to post about their projects on the app, though with new guardrails to protect city networks.

“The Mamdani administration is committed to using every tool in our toolbox to communicate with New Yorkers,” says the email to agencies, obtained by WIRED. “At a moment when people are turning to city government for information about free services, emergency situations, upcoming events, and more, we want to open up new avenues of communication with the public and help deliver the information New Yorkers need.”

In August 2023, then-mayor Adams barred the use of TikTok on government devices, joining the ranks of other state and federal agencies that at the time deemed the app a major security risk. Adams spokesperson Jonah Allon said then that the city’s Cyber Command office had decided that TikTok, which was owned by the Chinese-based company ByteDance, “posed a security threat to the city’s technical networks and directed its removal from city-owned devices.”

The directive resulted in a number of popular city-run accounts shutting down, including accounts for the NYC Departments of Sanitation and Parks and Recreation. As of Tuesday morning, the accounts’ bios read, “This account was operated by NYC until August 2023. It’s no longer monitored.”

Now, these TikTok accounts will be allowed to reopen with a few new rules aimed at protecting the security of NYC’s networks and devices while allowing agencies to communicate with citizens on the popular app. In order to use TikTok, agencies will be required to use separate, government-issued devices for the app that “cannot contain sensitive or restricted data, and they cannot be used for email, internal systems, or privileged access,” according to the email to agencies. Agencies will designate specific staff from media and press offices to run the TikTok accounts with city government emails, not personal ones.

“In a fragmented media landscape, more and more people—especially younger people—are looking beyond the four corners of their television screen to stay informed,” Mamdani said in a statement to WIRED. “Our responsibility is simple: Meet people where they are. That means stepping outside our comfort zones and communicating in ways that reflect how New Yorkers actually live, work, and connect.”

Mamdani’s rule reversal comes after his November election that relied heavily on social media to conduct voter outreach. Mamdani leveraged TikTok to recruit volunteers and amplify his policy platform. Over his first few months in office, Mamdani has continued to leverage social media platforms, publishing a variety of public-service announcements related to city-run programs.

Ahead of dangerous winter weather in January, Mamdani published a video to the official @nycmayor account on Instagram asking New Yorkers to sign up for the city’s free emergency communications program, NotifyNYC. The program netted more than 32,000 new subscribers in the four days after the video was released, according to stats provided by Mamdani’s office. Last year, New York City Emergency Management ran a $240,000 advertising round for NotifyNYC, acquiring around 48,000 new subscribers. Mamdani also created a handful of videos asking New Yorkers to join a Department of Sanitation snow-shoveling program. Around 5,000 people signed up, tripling the number previously enrolled in the program.

The situation has also changed for the app. In January 2026, TikTok finalized a deal with the Trump administration to form a new US-based version of the company run by American investors, including Oracle. The consortium of American investors staved off a nationwide ban of the app.



Source link
#Big #Reversal #Zohran #Mamdani #Tells #NYC #Agencies #TikTok

Over the weekend, Google CEO Sundar Pichai faced a small revolt when he delivered his commencement speech at Stanford University, where he earned his graduate degree in materials science and engineering. About 200 students from the graduating class reportedly walked out, while others loudly booed the tech executive.

The focus of the protest was Google’s defense ties — including Project Nimbus, the controversial $1.2 billion contract, shared with Amazon, to provide cloud and AI services to the Israeli military, as well as its relationship with the U.S. Immigration and Customs Enforcement agency.

Student signs included phrases like “ICE SPIES WITH GOOGLE AI” and “GENOCIDE RUNS ON GOOGLE,” as well as “FREE FREE PALESTINE,” a press release associated with the protest notes. Students also waved Palestinian flags and shouted “free Palestine,” online video of the protest shows.

“We are walking out because we refuse to glorify the corporations that fuel this violence and exercise our power to choose differently,” a statement associated with the protest reads.

The walkout was organized by a number of campus activist groups, including Stanford Students for Justice in Palestine, No Tech for Apartheid, and Tech for Liberation. TechCrunch reached out to Google for comment.

As the war in Gaza has raged, Google’s participation in Nimbus has drawn protests from both inside and outside of the company. In 2024, Google fired 28 workers for protesting the contract, although it has continued to suffer internal dissent over the issue since then. It was also recently criticized by the Electronic Frontier Foundation, which accused it and other companies of “choosing to look the other way” on Israel’s use of their services.

Project Nimbus also enjoys support from Amazon. Microsoft has also been criticized for its support of the Israeli military, although the company restricted the Israeli government’s use of its technology after an investigation found that its cloud services were being used to mass-surveil Palestinians.

The student protest also drew criticism from business leaders online. Vinod Khosla, the billionaire co-founder of Sun Microsystems and one of Silicon Valley’s most prominent venture capitalists, posted on X that the protest was “biased, idiotic, short-sighted and very selfish,” adding that it was selfish because the students “ignored the bottom 3 billion people on this planet that could benefit from AI and they are worried about their misinformed selfish self-interest.”

Pichai’s appearance at Stanford is part of a broader pattern. Speakers at college graduation ceremonies around the country have faced boos when they have attempted to get outgoing college students excited about AI. But rarely has student animus been as targeted as it was with Pichai, directed not at AI hype, but at the specific business decisions made by the company he leads. In general, young people seem to believe that AI is threatening their employment opportunities and may be ruining other parts of society as well.

When you purchase through links in our articles, we may earn a small commission. This doesn’t affect our editorial independence.

#Sundar #Pichai #faces #boos #walkout #Stanford #graduation #ceremony #Googles #Israel #ICE #ties #TechCrunchGoogle,ICE,Israel,Sundar Pichai">Sundar Pichai faces boos, walkout at Stanford graduation ceremony over Google’s Israel, ICE ties | TechCrunch
Over the weekend, Google CEO Sundar Pichai faced a small revolt when he delivered his commencement speech at Stanford University, where he earned his graduate degree in materials science and engineering. About 200 students from the graduating class reportedly walked out, while others loudly booed the tech executive.

The focus of the protest was Google’s defense ties — including Project Nimbus, the controversial .2 billion contract, shared with Amazon, to provide cloud and AI services to the Israeli military, as well as its relationship with the U.S. Immigration and Customs Enforcement agency.







Student signs included phrases like “ICE SPIES WITH GOOGLE AI” and “GENOCIDE RUNS ON GOOGLE,” as well as “FREE FREE PALESTINE,” a press release associated with the protest notes. Students also waved Palestinian flags and shouted “free Palestine,” online video of the protest shows.

“We are walking out because we refuse to glorify the corporations that fuel this violence and exercise our power to choose differently,” a statement associated with the protest reads. 

The walkout was organized by a number of campus activist groups, including Stanford Students for Justice in Palestine, No Tech for Apartheid, and Tech for Liberation. TechCrunch reached out to Google for comment. 

As the war in Gaza has raged, Google’s participation in Nimbus has drawn protests from both inside and outside of the company. In 2024, Google fired 28 workers for protesting the contract, although it has continued to suffer internal dissent over the issue since then. It was also recently criticized by the Electronic Frontier Foundation, which accused it and other companies of “choosing to look the other way” on Israel’s use of their services.

Project Nimbus also enjoys support from Amazon. Microsoft has also been criticized for its support of the Israeli military, although the company restricted the Israeli government’s use of its technology after an investigation found that its cloud services were being used to mass-surveil Palestinians.


The student protest also drew criticism from business leaders online. Vinod Khosla, the billionaire co-founder of Sun Microsystems and one of Silicon Valley’s most prominent venture capitalists, posted on X that the protest was “biased, idiotic, short-sighted and very selfish,” adding that it was selfish because the students “ignored the bottom 3 billion people on this planet that could benefit from AI and they are worried about their misinformed selfish self-interest.”

Pichai’s appearance at Stanford is part of a broader pattern. Speakers at college graduation ceremonies around the country have faced boos when they have attempted to get outgoing college students excited about AI. But rarely has student animus been as targeted as it was with Pichai, directed not at AI hype, but at the specific business decisions made by the company he leads. In general, young people seem to believe that AI is threatening their employment opportunities and may be ruining other parts of society as well.
When you purchase through links in our articles, we may earn a small commission. This doesn’t affect our editorial independence.#Sundar #Pichai #faces #boos #walkout #Stanford #graduation #ceremony #Googles #Israel #ICE #ties #TechCrunchGoogle,ICE,Israel,Sundar Pichai

reportedly walked out, while others loudly booed the tech executive.

The focus of the protest was Google’s defense ties — including Project Nimbus, the controversial $1.2 billion contract, shared with Amazon, to provide cloud and AI services to the Israeli military, as well as its relationship with the U.S. Immigration and Customs Enforcement agency.

Student signs included phrases like “ICE SPIES WITH GOOGLE AI” and “GENOCIDE RUNS ON GOOGLE,” as well as “FREE FREE PALESTINE,” a press release associated with the protest notes. Students also waved Palestinian flags and shouted “free Palestine,” online video of the protest shows.

“We are walking out because we refuse to glorify the corporations that fuel this violence and exercise our power to choose differently,” a statement associated with the protest reads.

The walkout was organized by a number of campus activist groups, including Stanford Students for Justice in Palestine, No Tech for Apartheid, and Tech for Liberation. TechCrunch reached out to Google for comment.

As the war in Gaza has raged, Google’s participation in Nimbus has drawn protests from both inside and outside of the company. In 2024, Google fired 28 workers for protesting the contract, although it has continued to suffer internal dissent over the issue since then. It was also recently criticized by the Electronic Frontier Foundation, which accused it and other companies of “choosing to look the other way” on Israel’s use of their services.

Project Nimbus also enjoys support from Amazon. Microsoft has also been criticized for its support of the Israeli military, although the company restricted the Israeli government’s use of its technology after an investigation found that its cloud services were being used to mass-surveil Palestinians.

The student protest also drew criticism from business leaders online. Vinod Khosla, the billionaire co-founder of Sun Microsystems and one of Silicon Valley’s most prominent venture capitalists, posted on X that the protest was “biased, idiotic, short-sighted and very selfish,” adding that it was selfish because the students “ignored the bottom 3 billion people on this planet that could benefit from AI and they are worried about their misinformed selfish self-interest.”

Pichai’s appearance at Stanford is part of a broader pattern. Speakers at college graduation ceremonies around the country have faced boos when they have attempted to get outgoing college students excited about AI. But rarely has student animus been as targeted as it was with Pichai, directed not at AI hype, but at the specific business decisions made by the company he leads. In general, young people seem to believe that AI is threatening their employment opportunities and may be ruining other parts of society as well.

When you purchase through links in our articles, we may earn a small commission. This doesn’t affect our editorial independence.

#Sundar #Pichai #faces #boos #walkout #Stanford #graduation #ceremony #Googles #Israel #ICE #ties #TechCrunchGoogle,ICE,Israel,Sundar Pichai">Sundar Pichai faces boos, walkout at Stanford graduation ceremony over Google’s Israel, ICE ties | TechCrunch

Over the weekend, Google CEO Sundar Pichai faced a small revolt when he delivered his commencement speech at Stanford University, where he earned his graduate degree in materials science and engineering. About 200 students from the graduating class reportedly walked out, while others loudly booed the tech executive.

The focus of the protest was Google’s defense ties — including Project Nimbus, the controversial $1.2 billion contract, shared with Amazon, to provide cloud and AI services to the Israeli military, as well as its relationship with the U.S. Immigration and Customs Enforcement agency.

Student signs included phrases like “ICE SPIES WITH GOOGLE AI” and “GENOCIDE RUNS ON GOOGLE,” as well as “FREE FREE PALESTINE,” a press release associated with the protest notes. Students also waved Palestinian flags and shouted “free Palestine,” online video of the protest shows.

“We are walking out because we refuse to glorify the corporations that fuel this violence and exercise our power to choose differently,” a statement associated with the protest reads.

The walkout was organized by a number of campus activist groups, including Stanford Students for Justice in Palestine, No Tech for Apartheid, and Tech for Liberation. TechCrunch reached out to Google for comment.

As the war in Gaza has raged, Google’s participation in Nimbus has drawn protests from both inside and outside of the company. In 2024, Google fired 28 workers for protesting the contract, although it has continued to suffer internal dissent over the issue since then. It was also recently criticized by the Electronic Frontier Foundation, which accused it and other companies of “choosing to look the other way” on Israel’s use of their services.

Project Nimbus also enjoys support from Amazon. Microsoft has also been criticized for its support of the Israeli military, although the company restricted the Israeli government’s use of its technology after an investigation found that its cloud services were being used to mass-surveil Palestinians.

The student protest also drew criticism from business leaders online. Vinod Khosla, the billionaire co-founder of Sun Microsystems and one of Silicon Valley’s most prominent venture capitalists, posted on X that the protest was “biased, idiotic, short-sighted and very selfish,” adding that it was selfish because the students “ignored the bottom 3 billion people on this planet that could benefit from AI and they are worried about their misinformed selfish self-interest.”

Pichai’s appearance at Stanford is part of a broader pattern. Speakers at college graduation ceremonies around the country have faced boos when they have attempted to get outgoing college students excited about AI. But rarely has student animus been as targeted as it was with Pichai, directed not at AI hype, but at the specific business decisions made by the company he leads. In general, young people seem to believe that AI is threatening their employment opportunities and may be ruining other parts of society as well.

When you purchase through links in our articles, we may earn a small commission. This doesn’t affect our editorial independence.

#Sundar #Pichai #faces #boos #walkout #Stanford #graduation #ceremony #Googles #Israel #ICE #ties #TechCrunchGoogle,ICE,Israel,Sundar Pichai
Creality Falcon T1 plans to solve. It’s a 5-in-1 laser workstation that lets you swap between five different laser modules in a single desktop machine.

How Does This Work?

Creality Falcon T1 Combines Five Laser Engravers Into One Machine
	
Laser engraving can be incredibly versatile. You can engrave designs on metal or wood and gift them to your loved ones or sell them as a business. But there has always been a catch. If you want to work with different materials like metal, wood, glass, acrylic, or crystal, you’ll often need multiple machines, each designed for a specific job. This can quickly multiply the costs and make engraving an expensive hobby. Well, that’s exactly the problem the Creality Falcon T1 plans to solve. It’s a 5-in-1 laser workstation that lets you swap between five different laser modules in a single desktop machine. 



How Does This Work?







The main selling point of the Falcon T1 is its modular design. Instead of buying separate machines for different materials, users can swap between five laser modules in about 15 seconds without tools.



Each module is designed for a specific type of work. The 20W Fiber Laser is intended for deep engraving on materials like stainless steel, aluminum, and hardwood. If you’re working primarily with metals and need things like color marking or deeper engravings, the 60W MOPA Laser is designed for materials such as titanium, gold, silver, brass, and copper.



For more traditional maker projects, the 20W and 40W Diode Lasers can cut and engrave wood, acrylic, MDF, leather, ceramics, and bamboo. Meanwhile, the 5W UV Laser focuses on transparent materials such as glass, crystal, and acrylic, opening up possibilities that standard diode lasers typically struggle with.



In practical terms, this means you could engrave a custom design on a metal nameplate and switch modules, then cut a wooden display stand for it with the same machine. According to Creality, building a similar setup using dedicated machines could easily cost over ,000, whereas the Falcon T1 starts at ,249.



Finally, to help you not blow your eyes out, the T1 has Class 1 laser safety certification and a fully enclosed design. Additional safeguards include automatic shutdown when the lid is opened, flame detection systems, airflow monitoring, an emergency stop button, and a laser key lock.

#Creality #Falcon #Combines #Laser #Engravers #Machinelaser

The main selling point of the Falcon T1 is its modular design. Instead of buying separate machines for different materials, users can swap between five laser modules in about 15 seconds without tools.

Each module is designed for a specific type of work. The 20W Fiber Laser is intended for deep engraving on materials like stainless steel, aluminum, and hardwood. If you’re working primarily with metals and need things like color marking or deeper engravings, the 60W MOPA Laser is designed for materials such as titanium, gold, silver, brass, and copper.

For more traditional maker projects, the 20W and 40W Diode Lasers can cut and engrave wood, acrylic, MDF, leather, ceramics, and bamboo. Meanwhile, the 5W UV Laser focuses on transparent materials such as glass, crystal, and acrylic, opening up possibilities that standard diode lasers typically struggle with.

In practical terms, this means you could engrave a custom design on a metal nameplate and switch modules, then cut a wooden display stand for it with the same machine. According to Creality, building a similar setup using dedicated machines could easily cost over $20,000, whereas the Falcon T1 starts at $2,249.

Finally, to help you not blow your eyes out, the T1 has Class 1 laser safety certification and a fully enclosed design. Additional safeguards include automatic shutdown when the lid is opened, flame detection systems, airflow monitoring, an emergency stop button, and a laser key lock.

#Creality #Falcon #Combines #Laser #Engravers #Machinelaser">Creality Falcon T1 Combines Five Laser Engravers Into One Machine
	
Laser engraving can be incredibly versatile. You can engrave designs on metal or wood and gift them to your loved ones or sell them as a business. But there has always been a catch. If you want to work with different materials like metal, wood, glass, acrylic, or crystal, you’ll often need multiple machines, each designed for a specific job. This can quickly multiply the costs and make engraving an expensive hobby. Well, that’s exactly the problem the Creality Falcon T1 plans to solve. It’s a 5-in-1 laser workstation that lets you swap between five different laser modules in a single desktop machine. 



How Does This Work?







The main selling point of the Falcon T1 is its modular design. Instead of buying separate machines for different materials, users can swap between five laser modules in about 15 seconds without tools.



Each module is designed for a specific type of work. The 20W Fiber Laser is intended for deep engraving on materials like stainless steel, aluminum, and hardwood. If you’re working primarily with metals and need things like color marking or deeper engravings, the 60W MOPA Laser is designed for materials such as titanium, gold, silver, brass, and copper.



For more traditional maker projects, the 20W and 40W Diode Lasers can cut and engrave wood, acrylic, MDF, leather, ceramics, and bamboo. Meanwhile, the 5W UV Laser focuses on transparent materials such as glass, crystal, and acrylic, opening up possibilities that standard diode lasers typically struggle with.



In practical terms, this means you could engrave a custom design on a metal nameplate and switch modules, then cut a wooden display stand for it with the same machine. According to Creality, building a similar setup using dedicated machines could easily cost over ,000, whereas the Falcon T1 starts at ,249.



Finally, to help you not blow your eyes out, the T1 has Class 1 laser safety certification and a fully enclosed design. Additional safeguards include automatic shutdown when the lid is opened, flame detection systems, airflow monitoring, an emergency stop button, and a laser key lock.

#Creality #Falcon #Combines #Laser #Engravers #Machinelaser

plans to solve. It’s a 5-in-1 laser workstation that lets you swap between five different laser modules in a single desktop machine.

How Does This Work?

Creality Falcon T1 Combines Five Laser Engravers Into One Machine
	
Laser engraving can be incredibly versatile. You can engrave designs on metal or wood and gift them to your loved ones or sell them as a business. But there has always been a catch. If you want to work with different materials like metal, wood, glass, acrylic, or crystal, you’ll often need multiple machines, each designed for a specific job. This can quickly multiply the costs and make engraving an expensive hobby. Well, that’s exactly the problem the Creality Falcon T1 plans to solve. It’s a 5-in-1 laser workstation that lets you swap between five different laser modules in a single desktop machine. 



How Does This Work?







The main selling point of the Falcon T1 is its modular design. Instead of buying separate machines for different materials, users can swap between five laser modules in about 15 seconds without tools.



Each module is designed for a specific type of work. The 20W Fiber Laser is intended for deep engraving on materials like stainless steel, aluminum, and hardwood. If you’re working primarily with metals and need things like color marking or deeper engravings, the 60W MOPA Laser is designed for materials such as titanium, gold, silver, brass, and copper.



For more traditional maker projects, the 20W and 40W Diode Lasers can cut and engrave wood, acrylic, MDF, leather, ceramics, and bamboo. Meanwhile, the 5W UV Laser focuses on transparent materials such as glass, crystal, and acrylic, opening up possibilities that standard diode lasers typically struggle with.



In practical terms, this means you could engrave a custom design on a metal nameplate and switch modules, then cut a wooden display stand for it with the same machine. According to Creality, building a similar setup using dedicated machines could easily cost over ,000, whereas the Falcon T1 starts at ,249.



Finally, to help you not blow your eyes out, the T1 has Class 1 laser safety certification and a fully enclosed design. Additional safeguards include automatic shutdown when the lid is opened, flame detection systems, airflow monitoring, an emergency stop button, and a laser key lock.

#Creality #Falcon #Combines #Laser #Engravers #Machinelaser

The main selling point of the Falcon T1 is its modular design. Instead of buying separate machines for different materials, users can swap between five laser modules in about 15 seconds without tools.

Each module is designed for a specific type of work. The 20W Fiber Laser is intended for deep engraving on materials like stainless steel, aluminum, and hardwood. If you’re working primarily with metals and need things like color marking or deeper engravings, the 60W MOPA Laser is designed for materials such as titanium, gold, silver, brass, and copper.

For more traditional maker projects, the 20W and 40W Diode Lasers can cut and engrave wood, acrylic, MDF, leather, ceramics, and bamboo. Meanwhile, the 5W UV Laser focuses on transparent materials such as glass, crystal, and acrylic, opening up possibilities that standard diode lasers typically struggle with.

In practical terms, this means you could engrave a custom design on a metal nameplate and switch modules, then cut a wooden display stand for it with the same machine. According to Creality, building a similar setup using dedicated machines could easily cost over $20,000, whereas the Falcon T1 starts at $2,249.

Finally, to help you not blow your eyes out, the T1 has Class 1 laser safety certification and a fully enclosed design. Additional safeguards include automatic shutdown when the lid is opened, flame detection systems, airflow monitoring, an emergency stop button, and a laser key lock.

#Creality #Falcon #Combines #Laser #Engravers #Machinelaser">Creality Falcon T1 Combines Five Laser Engravers Into One Machine

Laser engraving can be incredibly versatile. You can engrave designs on metal or wood and gift them to your loved ones or sell them as a business. But there has always been a catch. If you want to work with different materials like metal, wood, glass, acrylic, or crystal, you’ll often need multiple machines, each designed for a specific job. This can quickly multiply the costs and make engraving an expensive hobby. Well, that’s exactly the problem the Creality Falcon T1 plans to solve. It’s a 5-in-1 laser workstation that lets you swap between five different laser modules in a single desktop machine.

How Does This Work?

Creality Falcon T1 Combines Five Laser Engravers Into One Machine
	
Laser engraving can be incredibly versatile. You can engrave designs on metal or wood and gift them to your loved ones or sell them as a business. But there has always been a catch. If you want to work with different materials like metal, wood, glass, acrylic, or crystal, you’ll often need multiple machines, each designed for a specific job. This can quickly multiply the costs and make engraving an expensive hobby. Well, that’s exactly the problem the Creality Falcon T1 plans to solve. It’s a 5-in-1 laser workstation that lets you swap between five different laser modules in a single desktop machine. 



How Does This Work?







The main selling point of the Falcon T1 is its modular design. Instead of buying separate machines for different materials, users can swap between five laser modules in about 15 seconds without tools.



Each module is designed for a specific type of work. The 20W Fiber Laser is intended for deep engraving on materials like stainless steel, aluminum, and hardwood. If you’re working primarily with metals and need things like color marking or deeper engravings, the 60W MOPA Laser is designed for materials such as titanium, gold, silver, brass, and copper.



For more traditional maker projects, the 20W and 40W Diode Lasers can cut and engrave wood, acrylic, MDF, leather, ceramics, and bamboo. Meanwhile, the 5W UV Laser focuses on transparent materials such as glass, crystal, and acrylic, opening up possibilities that standard diode lasers typically struggle with.



In practical terms, this means you could engrave a custom design on a metal nameplate and switch modules, then cut a wooden display stand for it with the same machine. According to Creality, building a similar setup using dedicated machines could easily cost over ,000, whereas the Falcon T1 starts at ,249.



Finally, to help you not blow your eyes out, the T1 has Class 1 laser safety certification and a fully enclosed design. Additional safeguards include automatic shutdown when the lid is opened, flame detection systems, airflow monitoring, an emergency stop button, and a laser key lock.

#Creality #Falcon #Combines #Laser #Engravers #Machinelaser

The main selling point of the Falcon T1 is its modular design. Instead of buying separate machines for different materials, users can swap between five laser modules in about 15 seconds without tools.

Each module is designed for a specific type of work. The 20W Fiber Laser is intended for deep engraving on materials like stainless steel, aluminum, and hardwood. If you’re working primarily with metals and need things like color marking or deeper engravings, the 60W MOPA Laser is designed for materials such as titanium, gold, silver, brass, and copper.

For more traditional maker projects, the 20W and 40W Diode Lasers can cut and engrave wood, acrylic, MDF, leather, ceramics, and bamboo. Meanwhile, the 5W UV Laser focuses on transparent materials such as glass, crystal, and acrylic, opening up possibilities that standard diode lasers typically struggle with.

In practical terms, this means you could engrave a custom design on a metal nameplate and switch modules, then cut a wooden display stand for it with the same machine. According to Creality, building a similar setup using dedicated machines could easily cost over $20,000, whereas the Falcon T1 starts at $2,249.

Finally, to help you not blow your eyes out, the T1 has Class 1 laser safety certification and a fully enclosed design. Additional safeguards include automatic shutdown when the lid is opened, flame detection systems, airflow monitoring, an emergency stop button, and a laser key lock.

#Creality #Falcon #Combines #Laser #Engravers #Machinelaser

Post Comment