×
This Ancient River Seemed to Flow Uphill. Now We Know Why

This Ancient River Seemed to Flow Uphill. Now We Know Why

The Western United States’ Green River seems to have taken the path of most resistance to reach the Colorado River. New research, however, reveals that it may have had help from a hidden phenomenon.

The Green River—the Colorado River’s largest tributary—represents an enduring geological mystery. How did it carve through the Uinta Mountains in Utah instead of going around them? At one point in its history, the Green River even appears to have flowed uphill, climbing into the rising Uinta Mountains rather than being diverted around them. This defiance of basic topographic logic—not to mention the laws of physics—has stumped geologists for years.

If you’re thinking that maybe the river got there first, that’s not the answer; the Green River’s route is not even eight million years old, while the mountains are 50 million years old. Researchers think they’ve got the answer—a geological dynamic that might be behind other mysteries, too.

“For about 150 years now, geologists have debated over exactly how the rivers merged, which is a particularly challenging question for a tectonically inactive area where major geological events are rarer,” Adam Smith, a researcher at the School of Geographical & Earth Sciences at the University of Glasgow, said in a university statement. “We think that we’ve gathered enough evidence to show that lithospheric drip, which is still a relatively new concept in geology, is responsible for pulling the land down enough to enable the rivers to link and merge.”

Dripping drops

Dense material can accumulate at the bottom of the crust, Earth’s most superficial layer. When this accumulation grows sufficiently heavy, it drips—hence the name, “lithospheric drips”—into the mantle, the layer beneath the crust. The phenomenon can tug down mountains, causing them to sink, until the “drop” effectively “drips” and they can return to normal again. This recovery creates a characteristic bullseye shape in the topography.

Smith is the lead author of a study published today in the Journal of Geophysical Research: Earth Surface, in which he and his colleagues employed seismic imaging and data modeling. Seismic imaging allows researchers to understand Earth’s underground composition, and earlier seismic imaging studies revealed an anomaly—probably the detached drip—between 31 and 62 miles wide (50 and 100 kilometers) at a depth of around 124 miles (200 km). Its approximate depth and computed dripping speed suggest that it separated sometime between two and five million years ago.

This aligns with preexisting estimates of when the river probably carved through the Uinta Mountains—creating a canyon that today is 2,297 feet (700 meters) deep—and joined the Colorado system. In other words, the Green River was probably able to sculpt its modern-day route through the mountains when they were lowered by lithospheric dripping.

“The merging of the Green and Colorado Rivers millions of years ago altered the continental divide of North America,” Smith explained. “It created the line that separates the rivers that flow into the Pacific from those that flow into the Atlantic, and created new habitat boundaries for wildlife that influenced their evolution. It’s an enormously significant area of the continent.”

To be clear, the river never actually flowed uphill. As the new paper argues, lithospheric dripping temporarily pulled the mountains downward, allowing the river to continue flowing downhill along its path. To geologists looking at it today, this gives the appearance of the river flowing uphill. In reality, the river carved its path while the land was temporarily lowered, and the mountains later rebounded and rose around an already-established river canyon.

Missing material

The team found and measured the mountains’ encircling bullseye shape, unveiled by computer modeling. Furthermore, they discovered that the crust under the Uinta Mountains is significantly narrower than what researchers would anticipate for its elevation, further suggesting that a dense part of the lower crust dripped off. The increase in elevation they think this dripped material caused aligns with the uplift the river networks had led them to deduce.

“The evidence we’ve collected strongly contradicts the idea that the river predated the mountains, or that sediment deposits might have built up enough for the river to overtop the range, or that erosion from the south of the mountains captured the Green River,” Smith concluded.

To which he added: “We hope that this paper will help resolve a longstanding debate about one of North America’s most significant river systems, and help build the growing body of evidence that lithospheric drips may be the hidden answer to more tectonic mysteries than we’ve previously realised.”

Source link
#Ancient #River #Flow #Uphill

Hot showers, like electricity, are a luxury that’s easy to take for granted. That all changes after a few nights camping at a music festival, a week toiling at a backcountry job site, or overlanding all summer in the great unknown. An itchy scalp and the vague smell of warm clams suddenly make the idea of spending hundreds on a portable shower seem less absurd.

I’ve been testing the Hottap Go from Australia-based Joolca while vanlifing to shower after surfing and to wash up after cooking. It features a 12L integrated water tank which is an improvement on other portable showers that require an external container and long, cumbersome hose that’s easy to trip over. The Hottap Go also recirculates the water until it reaches your chosen temperature. This slows things down a bit, compared to “instant” portable showers, but it doesn’t waste water since it won’t produce an initial shock of cold water that’s usually sprayed into the ground.

The $554 Hottap Go requires an external 12V power source, but in the US Joolca sells a 12V / 5A $165 power bank that attaches magnetically to the case. In Europe I had to roll my own with an €85 (about $100) power bank found on Amazon. The result is a true, fully self-contained hot water system that can be taken anywhere.

$554

The Good

  • All-in-one solution for hot showers anywhere
  • Water tank large enough for two showers
  • All accessories and attachments store inside the unit
  • No water wasted unlike competitors
  • Temperature remains steady

The Bad

  • Very expensive
  • Battery is optional and attaches to the outside of the case
  • Have to wait a few minutes to heat up
  • Water pressure is just okay

To clear up any confusion right away: the Hottap Go requires electricity to power the integrated water pump and display but it heats the water with propane gas. It works with standard 1lb propane canisters out of the box, and larger tanks with a hose and regulator you must provide.

One thing I love about the Hottap Go is that the hoses, battery, showerhead, and gas canister can all be stored inside the water tank when not in use for easy portability and storage. I also like that the flow-adjustable showerhead comes with a magnetic holder. Taken together with its approach to preheating the water through recirculation, it’s clear that Joolca’s product designers have learned from the shortcomings of the current crop of portable propane showers.

To shower, you first attach the quick-release hoses for the gas and showerhead, plug the shower into a 12V power source (power bank, power station, or the cigarette plug inside your car), set your desired temperature and wait. The unit will begin heating and recirculating the water until a series of beeps indicates that the target temperature is reached. I brought tap water up to a hot 47C / 117F (per the display) in exactly four minutes, which was just enough time to gather everything I needed to shower outside my van with my modesty preserved.

My makeshift shower stall between the rear doors of my van. The Hottap Go is hot and ready to go by the time I hang the towel.

It also serves as an outdoor cleaning station to keep the messy dishes outside my living space.

The magnetic showerhead holder is super convenient. It attaches to the body of the Hottap Go or pretty much anywhere and any angle on my van.

The on/off button on the showerhead lets you conserve water as you lather. The grey dial adjusts the flow rate.

On one windy day at the beach, I noticed the Hottap Go had to keep reigniting, despite its leeward venting. It failed so often that I saw an E3 error message on the display. Repositioning the shower out of the wind kept the flame lit. The handle on top makes it easy to move, and the seal around the lid ensures that water won’t slosh onto the ground or your power bank. Otherwise, the Hottap Go always lit and stayed lit without issue during my testing.

Joolca says the Hottap Go is good for two “great showers” or a single “long, luxurious one.” I was able to take two functional yet satisfying showers from its full 12L (3.2 gal) water tank, making liberal use of the on/off switch on the showerhead to conserve water while lathering.

1/11

The hoses, gas canister, showerhead, and battery all fit inside for convenient transport and storage.

Water flow is just okay, even at maximum setting. It’s strong enough to penetrate long, thick hair when shampooing but it’s not going to jettison grime from my mountain bike, for example. The magnetic holder is strong and the showerhead feels good in the hand with a nicely positioned on/off switch. Adjusting the flow rate dial is a two-handed operation, but mostly I just left it on max.

If you’ll only use it once or twice a year, then spending over $554 for the Hottap Go portable shower doesn’t make much sense, especially when tankless portable showers like BougeRV’s cost half that. I much prefer the Hottap Go’s recirculating water tank, performance, and overall convenience, though I do wish the optional $165 magnetic power bank was included in that price. Still, for vanlifers like me or anyone who regularly spends days away from plumbing, $719 can be easily justified for what could be the best portable hot water shower available.

  • Tank: 12L (3.2 gal), ~2 showers
  • Water flow rate: 1.5 – 3.5 L/min (0.4 – 0.9 gal/min)
  • Shower hose: 3m (9.8 ft)
  • Showerhead has an integrated magnetic mount and controls to turn off the water and adjust its flow
  • Two-stage filter lets you use creek water
  • Cigarette socket power cable: 5m (16.4 ft), 12V DC
  • Power draw: 45W
  • Max temp: 60°C (140°F), pre-heats in ~5 min
  • Gas: 0.45 kg (1 lb) canister, ~15 showers
  • Gas flow rate: 20MJ/hr (18,956 BTU/hr)
  • Weight: 9.5 kg (20.9 lb) without water
  • Size: 495 x 359 x 180 mm (19.5 x 14.1 x 7.1 in), designed to fit most jerry can holders

Photos by Thomas Ricker / The Verge

Follow topics and authors from this story to see more like this in your personalized homepage feed and to receive email updates.
#filthy #portable #showerAccessory Reviews,Reviews,Tech,Work anywhere">Are you filthy enough for a 0 portable shower? Hot showers, like electricity, are a luxury that’s easy to take for granted. That all changes after a few nights camping at a music festival, a week toiling at a backcountry job site, or overlanding all summer in the great unknown. An itchy scalp and the vague smell of warm clams suddenly make the idea of spending hundreds on a portable shower seem less absurd.I’ve been testing the Hottap Go from Australia-based Joolca while vanlifing to shower after surfing and to wash up after cooking. It features a 12L integrated water tank which is an improvement on other portable showers that require an external container and long, cumbersome hose that’s easy to trip over. The Hottap Go also recirculates the water until it reaches your chosen temperature. This slows things down a bit, compared to “instant” portable showers, but it doesn’t waste water since it won’t produce an initial shock of cold water that’s usually sprayed into the ground.The 4 Hottap Go requires an external 12V power source, but in the US Joolca sells a 12V / 5A 5 power bank that attaches magnetically to the case. In Europe I had to roll my own with an €85 (about 0) power bank found on Amazon. The result is a true, fully self-contained hot water system that can be taken anywhere.4The GoodAll-in-one solution for hot showers anywhereWater tank large enough for two showersAll accessories and attachments store inside the unitNo water wasted unlike competitorsTemperature remains steadyThe BadVery expensiveBattery is optional and attaches to the outside of the caseHave to wait a few minutes to heat upWater pressure is just okayTo clear up any confusion right away: the Hottap Go requires electricity to power the integrated water pump and display but it heats the water with propane gas. It works with standard 1lb propane canisters out of the box, and larger tanks with a hose and regulator you must provide.One thing I love about the Hottap Go is that the hoses, battery, showerhead, and gas canister can all be stored inside the water tank when not in use for easy portability and storage. I also like that the flow-adjustable showerhead comes with a magnetic holder. Taken together with its approach to preheating the water through recirculation, it’s clear that Joolca’s product designers have learned from the shortcomings of the current crop of portable propane showers.To shower, you first attach the quick-release hoses for the gas and showerhead, plug the shower into a 12V power source (power bank, power station, or the cigarette plug inside your car), set your desired temperature and wait. The unit will begin heating and recirculating the water until a series of beeps indicates that the target temperature is reached. I brought tap water up to a hot 47C / 117F (per the display) in exactly four minutes, which was just enough time to gather everything I needed to shower outside my van with my modesty preserved.My makeshift shower stall between the rear doors of my van. The Hottap Go is hot and ready to go by the time I hang the towel.It also serves as an outdoor cleaning station to keep the messy dishes outside my living space.The magnetic showerhead holder is super convenient. It attaches to the body of the Hottap Go or pretty much anywhere and any angle on my van.The on/off button on the showerhead lets you conserve water as you lather. The grey dial adjusts the flow rate.On one windy day at the beach, I noticed the Hottap Go had to keep reigniting, despite its leeward venting. It failed so often that I saw an E3 error message on the display. Repositioning the shower out of the wind kept the flame lit. The handle on top makes it easy to move, and the seal around the lid ensures that water won’t slosh onto the ground or your power bank. Otherwise, the Hottap Go always lit and stayed lit without issue during my testing.Joolca says the Hottap Go is good for two “great showers” or a single “long, luxurious one.” I was able to take two functional yet satisfying showers from its full 12L (3.2 gal) water tank, making liberal use of the on/off switch on the showerhead to conserve water while lathering.1/11The hoses, gas canister, showerhead, and battery all fit inside for convenient transport and storage.Water flow is just okay, even at maximum setting. It’s strong enough to penetrate long, thick hair when shampooing but it’s not going to jettison grime from my mountain bike, for example. The magnetic holder is strong and the showerhead feels good in the hand with a nicely positioned on/off switch. Adjusting the flow rate dial is a two-handed operation, but mostly I just left it on max.If you’ll only use it once or twice a year, then spending over 4 for the Hottap Go portable shower doesn’t make much sense, especially when tankless portable showers like BougeRV’s cost half that. I much prefer the Hottap Go’s recirculating water tank, performance, and overall convenience, though I do wish the optional 5 magnetic power bank was included in that price. Still, for vanlifers like me or anyone who regularly spends days away from plumbing, 9 can be easily justified for what could be the best portable hot water shower available.Tank: 12L (3.2 gal), ~2 showersWater flow rate: 1.5 – 3.5 L/min (0.4 – 0.9 gal/min)Shower hose: 3m (9.8 ft)Showerhead has an integrated magnetic mount and controls to turn off the water and adjust its flowTwo-stage filter lets you use creek waterCigarette socket power cable: 5m (16.4 ft), 12V DCPower draw: 45WMax temp: 60°C (140°F), pre-heats in ~5 minGas: 0.45 kg (1 lb) canister, ~15 showersGas flow rate: 20MJ/hr (18,956 BTU/hr)Weight: 9.5 kg (20.9 lb) without waterSize: 495 x 359 x 180 mm (19.5 x 14.1 x 7.1 in), designed to fit most jerry can holdersPhotos by Thomas Ricker / The VergeFollow topics and authors from this story to see more like this in your personalized homepage feed and to receive email updates.Thomas RickerCloseThomas RickerPosts from this author will be added to your daily email digest and your homepage feed.FollowFollowSee All by Thomas RickerAccessory ReviewsCloseAccessory ReviewsPosts from this topic will be added to your daily email digest and your homepage feed.FollowFollowSee All Accessory ReviewsReviewsCloseReviewsPosts from this topic will be added to your daily email digest and your homepage feed.FollowFollowSee All ReviewsTechCloseTechPosts from this topic will be added to your daily email digest and your homepage feed.FollowFollowSee All TechWork anywhereCloseWork anywherePosts from this topic will be added to your daily email digest and your homepage feed.FollowFollowSee All Work anywhere#filthy #portable #showerAccessory Reviews,Reviews,Tech,Work anywhere

Hottap Go from Australia-based Joolca while vanlifing to shower after surfing and to wash up after cooking. It features a 12L integrated water tank which is an improvement on other portable showers that require an external container and long, cumbersome hose that’s easy to trip over. The Hottap Go also recirculates the water until it reaches your chosen temperature. This slows things down a bit, compared to “instant” portable showers, but it doesn’t waste water since it won’t produce an initial shock of cold water that’s usually sprayed into the ground.

The $554 Hottap Go requires an external 12V power source, but in the US Joolca sells a 12V / 5A $165 power bank that attaches magnetically to the case. In Europe I had to roll my own with an €85 (about $100) power bank found on Amazon. The result is a true, fully self-contained hot water system that can be taken anywhere.

$554

The Good

  • All-in-one solution for hot showers anywhere
  • Water tank large enough for two showers
  • All accessories and attachments store inside the unit
  • No water wasted unlike competitors
  • Temperature remains steady

The Bad

  • Very expensive
  • Battery is optional and attaches to the outside of the case
  • Have to wait a few minutes to heat up
  • Water pressure is just okay

To clear up any confusion right away: the Hottap Go requires electricity to power the integrated water pump and display but it heats the water with propane gas. It works with standard 1lb propane canisters out of the box, and larger tanks with a hose and regulator you must provide.

One thing I love about the Hottap Go is that the hoses, battery, showerhead, and gas canister can all be stored inside the water tank when not in use for easy portability and storage. I also like that the flow-adjustable showerhead comes with a magnetic holder. Taken together with its approach to preheating the water through recirculation, it’s clear that Joolca’s product designers have learned from the shortcomings of the current crop of portable propane showers.

To shower, you first attach the quick-release hoses for the gas and showerhead, plug the shower into a 12V power source (power bank, power station, or the cigarette plug inside your car), set your desired temperature and wait. The unit will begin heating and recirculating the water until a series of beeps indicates that the target temperature is reached. I brought tap water up to a hot 47C / 117F (per the display) in exactly four minutes, which was just enough time to gather everything I needed to shower outside my van with my modesty preserved.

My makeshift shower stall between the rear doors of my van. The Hottap Go is hot and ready to go by the time I hang the towel.

It also serves as an outdoor cleaning station to keep the messy dishes outside my living space.

The magnetic showerhead holder is super convenient. It attaches to the body of the Hottap Go or pretty much anywhere and any angle on my van.

The on/off button on the showerhead lets you conserve water as you lather. The grey dial adjusts the flow rate.

On one windy day at the beach, I noticed the Hottap Go had to keep reigniting, despite its leeward venting. It failed so often that I saw an E3 error message on the display. Repositioning the shower out of the wind kept the flame lit. The handle on top makes it easy to move, and the seal around the lid ensures that water won’t slosh onto the ground or your power bank. Otherwise, the Hottap Go always lit and stayed lit without issue during my testing.

Joolca says the Hottap Go is good for two “great showers” or a single “long, luxurious one.” I was able to take two functional yet satisfying showers from its full 12L (3.2 gal) water tank, making liberal use of the on/off switch on the showerhead to conserve water while lathering.

1/11

The hoses, gas canister, showerhead, and battery all fit inside for convenient transport and storage.

Water flow is just okay, even at maximum setting. It’s strong enough to penetrate long, thick hair when shampooing but it’s not going to jettison grime from my mountain bike, for example. The magnetic holder is strong and the showerhead feels good in the hand with a nicely positioned on/off switch. Adjusting the flow rate dial is a two-handed operation, but mostly I just left it on max.

If you’ll only use it once or twice a year, then spending over $554 for the Hottap Go portable shower doesn’t make much sense, especially when tankless portable showers like BougeRV’s cost half that. I much prefer the Hottap Go’s recirculating water tank, performance, and overall convenience, though I do wish the optional $165 magnetic power bank was included in that price. Still, for vanlifers like me or anyone who regularly spends days away from plumbing, $719 can be easily justified for what could be the best portable hot water shower available.

  • Tank: 12L (3.2 gal), ~2 showers
  • Water flow rate: 1.5 – 3.5 L/min (0.4 – 0.9 gal/min)
  • Shower hose: 3m (9.8 ft)
  • Showerhead has an integrated magnetic mount and controls to turn off the water and adjust its flow
  • Two-stage filter lets you use creek water
  • Cigarette socket power cable: 5m (16.4 ft), 12V DC
  • Power draw: 45W
  • Max temp: 60°C (140°F), pre-heats in ~5 min
  • Gas: 0.45 kg (1 lb) canister, ~15 showers
  • Gas flow rate: 20MJ/hr (18,956 BTU/hr)
  • Weight: 9.5 kg (20.9 lb) without water
  • Size: 495 x 359 x 180 mm (19.5 x 14.1 x 7.1 in), designed to fit most jerry can holders

Photos by Thomas Ricker / The Verge

Follow topics and authors from this story to see more like this in your personalized homepage feed and to receive email updates.

#filthy #portable #showerAccessory Reviews,Reviews,Tech,Work anywhere">Are you filthy enough for a $700 portable shower? 

Hot showers, like electricity, are a luxury that’s easy to take for granted. That all changes after a few nights camping at a music festival, a week toiling at a backcountry job site, or overlanding all summer in the great unknown. An itchy scalp and the vague smell of warm clams suddenly make the idea of spending hundreds on a portable shower seem less absurd.

I’ve been testing the Hottap Go from Australia-based Joolca while vanlifing to shower after surfing and to wash up after cooking. It features a 12L integrated water tank which is an improvement on other portable showers that require an external container and long, cumbersome hose that’s easy to trip over. The Hottap Go also recirculates the water until it reaches your chosen temperature. This slows things down a bit, compared to “instant” portable showers, but it doesn’t waste water since it won’t produce an initial shock of cold water that’s usually sprayed into the ground.

The $554 Hottap Go requires an external 12V power source, but in the US Joolca sells a 12V / 5A $165 power bank that attaches magnetically to the case. In Europe I had to roll my own with an €85 (about $100) power bank found on Amazon. The result is a true, fully self-contained hot water system that can be taken anywhere.

$554

The Good

  • All-in-one solution for hot showers anywhere
  • Water tank large enough for two showers
  • All accessories and attachments store inside the unit
  • No water wasted unlike competitors
  • Temperature remains steady

The Bad

  • Very expensive
  • Battery is optional and attaches to the outside of the case
  • Have to wait a few minutes to heat up
  • Water pressure is just okay

To clear up any confusion right away: the Hottap Go requires electricity to power the integrated water pump and display but it heats the water with propane gas. It works with standard 1lb propane canisters out of the box, and larger tanks with a hose and regulator you must provide.

One thing I love about the Hottap Go is that the hoses, battery, showerhead, and gas canister can all be stored inside the water tank when not in use for easy portability and storage. I also like that the flow-adjustable showerhead comes with a magnetic holder. Taken together with its approach to preheating the water through recirculation, it’s clear that Joolca’s product designers have learned from the shortcomings of the current crop of portable propane showers.

To shower, you first attach the quick-release hoses for the gas and showerhead, plug the shower into a 12V power source (power bank, power station, or the cigarette plug inside your car), set your desired temperature and wait. The unit will begin heating and recirculating the water until a series of beeps indicates that the target temperature is reached. I brought tap water up to a hot 47C / 117F (per the display) in exactly four minutes, which was just enough time to gather everything I needed to shower outside my van with my modesty preserved.

My makeshift shower stall between the rear doors of my van. The Hottap Go is hot and ready to go by the time I hang the towel.

It also serves as an outdoor cleaning station to keep the messy dishes outside my living space.

The magnetic showerhead holder is super convenient. It attaches to the body of the Hottap Go or pretty much anywhere and any angle on my van.

The on/off button on the showerhead lets you conserve water as you lather. The grey dial adjusts the flow rate.

On one windy day at the beach, I noticed the Hottap Go had to keep reigniting, despite its leeward venting. It failed so often that I saw an E3 error message on the display. Repositioning the shower out of the wind kept the flame lit. The handle on top makes it easy to move, and the seal around the lid ensures that water won’t slosh onto the ground or your power bank. Otherwise, the Hottap Go always lit and stayed lit without issue during my testing.

Joolca says the Hottap Go is good for two “great showers” or a single “long, luxurious one.” I was able to take two functional yet satisfying showers from its full 12L (3.2 gal) water tank, making liberal use of the on/off switch on the showerhead to conserve water while lathering.

1/11

The hoses, gas canister, showerhead, and battery all fit inside for convenient transport and storage.

Water flow is just okay, even at maximum setting. It’s strong enough to penetrate long, thick hair when shampooing but it’s not going to jettison grime from my mountain bike, for example. The magnetic holder is strong and the showerhead feels good in the hand with a nicely positioned on/off switch. Adjusting the flow rate dial is a two-handed operation, but mostly I just left it on max.

If you’ll only use it once or twice a year, then spending over $554 for the Hottap Go portable shower doesn’t make much sense, especially when tankless portable showers like BougeRV’s cost half that. I much prefer the Hottap Go’s recirculating water tank, performance, and overall convenience, though I do wish the optional $165 magnetic power bank was included in that price. Still, for vanlifers like me or anyone who regularly spends days away from plumbing, $719 can be easily justified for what could be the best portable hot water shower available.

  • Tank: 12L (3.2 gal), ~2 showers
  • Water flow rate: 1.5 – 3.5 L/min (0.4 – 0.9 gal/min)
  • Shower hose: 3m (9.8 ft)
  • Showerhead has an integrated magnetic mount and controls to turn off the water and adjust its flow
  • Two-stage filter lets you use creek water
  • Cigarette socket power cable: 5m (16.4 ft), 12V DC
  • Power draw: 45W
  • Max temp: 60°C (140°F), pre-heats in ~5 min
  • Gas: 0.45 kg (1 lb) canister, ~15 showers
  • Gas flow rate: 20MJ/hr (18,956 BTU/hr)
  • Weight: 9.5 kg (20.9 lb) without water
  • Size: 495 x 359 x 180 mm (19.5 x 14.1 x 7.1 in), designed to fit most jerry can holders

Photos by Thomas Ricker / The Verge

Follow topics and authors from this story to see more like this in your personalized homepage feed and to receive email updates.
#filthy #portable #showerAccessory Reviews,Reviews,Tech,Work anywhere
U.S. federal cybersecurity agency CISA said it did not have a prepared response plan for how it should handle a cybersecurity incident in May, after an investigative reporter notified the agency that a contractor had publicly exposed sensitive keys and credentials for accessing U.S. government systems.

CISA, the Homeland Security unit tasked with defending federal networks and helping to safeguard critical infrastructure, revealed Friday in a postmortem report that its staff “had to spend time building [a playbook] during the early stages of the incident.” The agency said it is important to prepare playbooks for “all anticipated needs” to ensure that organizations are ready to respond in the event of a security incident rather than scrambling to improvise one in real time.

The agency did not say how long the missing playbook delayed CISA’s response, and a spokesperson did not immediately respond to TechCrunch’s request for comment. 

Independent cybersecurity journalist Brian Krebs reported in May that a security researcher with cyber firm GitGuardian alerted him to reams of exposed passwords stored in a publicly accessible GitHub repository, which an employee of a CISA contractor had uploaded.

According to Krebs, the researcher tried to alert the contractor but didn’t hear back. Only after Krebs contacted CISA did the agency take the repository offline and revoke and replace all of the exposed credentials to prevent any potential future abuse.

CISA said that no customer or mission data was exposed in the incident and thanked the researcher and reporter for their help. The agency said that its channels for allowing security researchers to notify CISA of potential incidents “were not well defined,” and that it has made changes to make it easier and faster for researchers to contact the agency.

CISA has been without a permanent director since the start of President Donald Trump’s second term in January 2025. The agency has also been affected by cuts, furloughs, and layoffs affecting about a third of its workforce since Trump took office. 

When you purchase through links in our articles, we may earn a small commission. This doesn’t affect our editorial independence.

#cybersecurity #agency #CISA #build #incident #playbook #incident #agency #reveals #TechCrunchCISA,cybersecurity,us government">US cybersecurity agency CISA had to build its incident playbook during the incident, agency reveals | TechCrunch
U.S. federal cybersecurity agency CISA said it did not have a prepared response plan for how it should handle a cybersecurity incident in May, after an investigative reporter notified the agency that a contractor had publicly exposed sensitive keys and credentials for accessing U.S. government systems.

CISA, the Homeland Security unit tasked with defending federal networks and helping to safeguard critical infrastructure, revealed Friday in a postmortem report that its staff “had to spend time building [a playbook] during the early stages of the incident.” The agency said it is important to prepare playbooks for “all anticipated needs” to ensure that organizations are ready to respond in the event of a security incident rather than scrambling to improvise one in real time.







The agency did not say how long the missing playbook delayed CISA’s response, and a spokesperson did not immediately respond to TechCrunch’s request for comment. 

Independent cybersecurity journalist Brian Krebs reported in May that a security researcher with cyber firm GitGuardian alerted him to reams of exposed passwords stored in a publicly accessible GitHub repository, which an employee of a CISA contractor had uploaded.

According to Krebs, the researcher tried to alert the contractor but didn’t hear back. Only after Krebs contacted CISA did the agency take the repository offline and revoke and replace all of the exposed credentials to prevent any potential future abuse.

CISA said that no customer or mission data was exposed in the incident and thanked the researcher and reporter for their help. The agency said that its channels for allowing security researchers to notify CISA of potential incidents “were not well defined,” and that it has made changes to make it easier and faster for researchers to contact the agency.

CISA has been without a permanent director since the start of President Donald Trump’s second term in January 2025. The agency has also been affected by cuts, furloughs, and layoffs affecting about a third of its workforce since Trump took office. 
When you purchase through links in our articles, we may earn a small commission. This doesn’t affect our editorial independence.#cybersecurity #agency #CISA #build #incident #playbook #incident #agency #reveals #TechCrunchCISA,cybersecurity,us government

in a postmortem report that its staff “had to spend time building [a playbook] during the early stages of the incident.” The agency said it is important to prepare playbooks for “all anticipated needs” to ensure that organizations are ready to respond in the event of a security incident rather than scrambling to improvise one in real time.

The agency did not say how long the missing playbook delayed CISA’s response, and a spokesperson did not immediately respond to TechCrunch’s request for comment. 

Independent cybersecurity journalist Brian Krebs reported in May that a security researcher with cyber firm GitGuardian alerted him to reams of exposed passwords stored in a publicly accessible GitHub repository, which an employee of a CISA contractor had uploaded.

According to Krebs, the researcher tried to alert the contractor but didn’t hear back. Only after Krebs contacted CISA did the agency take the repository offline and revoke and replace all of the exposed credentials to prevent any potential future abuse.

CISA said that no customer or mission data was exposed in the incident and thanked the researcher and reporter for their help. The agency said that its channels for allowing security researchers to notify CISA of potential incidents “were not well defined,” and that it has made changes to make it easier and faster for researchers to contact the agency.

CISA has been without a permanent director since the start of President Donald Trump’s second term in January 2025. The agency has also been affected by cuts, furloughs, and layoffs affecting about a third of its workforce since Trump took office. 

When you purchase through links in our articles, we may earn a small commission. This doesn’t affect our editorial independence.

#cybersecurity #agency #CISA #build #incident #playbook #incident #agency #reveals #TechCrunchCISA,cybersecurity,us government">US cybersecurity agency CISA had to build its incident playbook during the incident, agency reveals | TechCrunch

U.S. federal cybersecurity agency CISA said it did not have a prepared response plan for how it should handle a cybersecurity incident in May, after an investigative reporter notified the agency that a contractor had publicly exposed sensitive keys and credentials for accessing U.S. government systems.

CISA, the Homeland Security unit tasked with defending federal networks and helping to safeguard critical infrastructure, revealed Friday in a postmortem report that its staff “had to spend time building [a playbook] during the early stages of the incident.” The agency said it is important to prepare playbooks for “all anticipated needs” to ensure that organizations are ready to respond in the event of a security incident rather than scrambling to improvise one in real time.

The agency did not say how long the missing playbook delayed CISA’s response, and a spokesperson did not immediately respond to TechCrunch’s request for comment. 

Independent cybersecurity journalist Brian Krebs reported in May that a security researcher with cyber firm GitGuardian alerted him to reams of exposed passwords stored in a publicly accessible GitHub repository, which an employee of a CISA contractor had uploaded.

According to Krebs, the researcher tried to alert the contractor but didn’t hear back. Only after Krebs contacted CISA did the agency take the repository offline and revoke and replace all of the exposed credentials to prevent any potential future abuse.

CISA said that no customer or mission data was exposed in the incident and thanked the researcher and reporter for their help. The agency said that its channels for allowing security researchers to notify CISA of potential incidents “were not well defined,” and that it has made changes to make it easier and faster for researchers to contact the agency.

CISA has been without a permanent director since the start of President Donald Trump’s second term in January 2025. The agency has also been affected by cuts, furloughs, and layoffs affecting about a third of its workforce since Trump took office. 

When you purchase through links in our articles, we may earn a small commission. This doesn’t affect our editorial independence.

#cybersecurity #agency #CISA #build #incident #playbook #incident #agency #reveals #TechCrunchCISA,cybersecurity,us government

Post Comment