×
Sequoia bets on silence | TechCrunch

Sequoia bets on silence | TechCrunch

There is a time-honored crisis management strategy, wherein one says nothing and waits for the outrage to pass. For Sequoia Capital, the strategy worked pretty well this week. While partner Shaun Maguire initially weathered criticism over an inflammatory social media post, that initial indignation cooled quickly. Now, some seem to think that Maguire’s defiant stance may even be strengthening his position. Business Insider actually called it “good for deal flow” — controversy as competitive advantage.

Sequoia’s calculated gamble carries real risk, though. Another provocative post from Maguire that hits the wrong nerve, a shift in political winds, or escalating consequences could quickly transform their unflappable partner from an asset into a liability the firm can no longer afford to ignore.

A crisis communications professional who has managed reputation disasters for dozens of major brands tells this editor, “Firms like Sequoia are bulletproof until they aren’t.”

What happened

Sequoia’s hands-off approach was put to the test earlier this week when the storied venture firm found itself in the eye of a storm over Maguire’s comments about New York City mayoral candidate Zohran Mamdani. Maguire called him an “Islamist” who “comes from a culture that lies about everything” in a July 4th tweet on X that has since been viewed more than five million times. More than one thousand signatures have poured in regarding a petition demanding that Sequoia condemn the remarks, investigate Maguire’s conduct, and apologize.

There’s been a lot of talk about why Sequoia hasn’t done this, with many outlets noting that Maguire isn’t just any partner. This status owes partly to his friendship with Stripe co-founder Patrick Collison. According to reports, at a 2015 Founders Fund event, Maguire — then a Founders Fund-backed entrepreneur — defended Collison during an argument with Anduril’s Palmer Luckey about quantum computing, earning Collison’s friendship. The connection proved valuable when Maguire joined Google Ventures in 2016; he helped secure a $20 million Stripe investment during his first week. When Maguire left Google Ventures in 2019, Collison personally recommended him to Sequoia’s partners. (Stripe has been in Sequoia’s portfolio since 2010, with the firm investing more than $500 million over 15 years.)

Maguire also led Sequoia’s investment in Bridge, a stablecoin platform that Stripe acquired for $1.1 billion, and is reportedly Sequoia’s link to Elon Musk, though he’s hardly its only link. Musk and Sequoia’s global leader, Roelof Botha, are both native South Africans and have known each other for more than 25 years, dating back to their time together at the then-nascent PayPal, where Botha was recruited personally by Musk.

Despite that long relationship, the two haven’t always seen eye to eye. Botha was highly critical of Musk’s management style when Musk was CEO of the merged X.com/PayPal company, where Botha was CFO. Botha once told veteran journalist Ebbe Dommisse, “I think it would have killed the company if Elon had stayed on as CEO for six more months. The mistakes Elon was making at the time were amplifying the risk of the business.” But Musk was at odds with pretty much that entire crew at the time, and those tensions have long since been resolved.

The bigger point here: when you’re managing tens of billions of dollars in assets and your firm’s reputation rests on backing winners like Google, Stripe, and Nvidia, you don’t easily cast aside a rainmaker.

Meanwhile, Maguire’s behavior suggests he’s not backing down. After issuing a 30-minute video on X last weekend in which he apologized for offending so many — saying he was making a point about a political ideology and not one about a religion — he has doubled down with increasingly aggressive posts this week. He claimed he has “reverse engineered” his critics’ “command structure” and threatened to “embarrass” anyone who escalates against him. He added that this is him at “1% throttle” and warned people not to “fuck w children of the internet.”

The silent treatment

Sequoia has precedent for its approach to this situation. The firm has historically given its partners space to express themselves publicly, with figures like Doug Leone and Michael Moritz (who left the firm in 2023) representing different political perspectives.

But there’s a crucial difference between political diversity and incendiary rhetoric and clearly to some, Maguire’s comments extend beyond partisan politics into territory that alienates both political opponents and potential business partners.

It’s also worth remembering that even for Sequoia, there is a bright line. Michael Goguen, another, earlier rainmaker with the firm, was promptly shown the door when Sequoia learned of a sexual abuse lawsuit filed against him. The situations aren’t exactly comparable; Goguen’s issues were legal and personal, not ideological. At the same time, Sequoia has shown it isn’t willing to circle the wagons at any cost, not if its reputation is at stake.

Presumably, several factors inform Sequoia’s do-nothing PR strategy, including how quickly people, faced with a constant flurry of news, move on from a scandal. The firm is also operating in a different political landscape right now in the U.S. Along with Donald Trump’s victory and the rollback of DEI initiatives has come new tolerance for controversial speech. What might have been career-ending at an earlier point in time is now weathered more easily.

Beyond the shifting political winds, the firm is likely banking on the fact that while founders want partners who fit the traditional, more genteel VC mold, they want successful ones even more. Startups being courted by multiple top-tier firms might not like or agree with Maguire, but when Sequoia comes calling with its track record and almost bottomless pockets, most founders are going to welcome the firm with open arms.

Of course, there’s the very real possibility, too, that Sequoia is working on a contingency plan. (Sequoia declined to comment on Maguire’s posts when reached by TechCrunch earlier this week.)

Still, Sequoia’s silence carries risks. Not all the signers have been confirmed, but the petition against Maguire includes the names of some prominent Middle Eastern executives and founders who have attested to signing it, and they represent the kind of diverse, global talent pool on which Sequoia’s future depends. By not addressing the controversy, Sequoia risks being seen as tacitly endorsing Maguire’s views.

Put another way, though the venture capital world has historically been remarkably forgiving of controversial figures with exceptional deal flow, the firm is gambling with its reputation in an increasingly connected global market where alienating entire regions and communities carries real business consequences.

Whether that bet pays off will depend on how long the controversy lingers, how much business it actually costs Sequoia, and whether Maguire can resist the urge to push things past Sequoia’s own tolerance threshold. (He has said he doesn’t post anything that hasn’t been “excrutiatingly thought out.”)

History suggests that established financial firms with strong track records tend to outlive their scandals, even serious ones. When Apollo Global Management’s Leon Black resigned in 2021 over his $158 million payments to Jeffrey Epstein, the firm’s stock barely moved and shareholders seemed largely unfazed. Apollo just continued its aggressive deal-making under new leadership.

Similarly, Kleiner Perkins survived Ellen Pao’s high-profile gender discrimination lawsuit in 2015. But it took years and essentially an entirely new team for the storied venture firm to regain its footing in Silicon Valley’s hierarchy. The lesson here may be that while controversial partners can be endured, the recovery timelines can vary significantly depending on how firms handle the crisis.

For now, the crisis communications professional, who asked not to be named, has some advice for Maguire and, by extension, Sequoia. Regarding the video Maguire published in the aftermath of his initial comments, the expert said, “I did think that apology addressed the ambiguities in [Maguire’s] post. But it’s a 30-minute video — you have to be really interested to watch this.”

If there’s a next time, the professional said, Maguire should “do two videos — one for three minutes” and another, longer video, for anyone who wants to keep watching.

Sometimes, the expert added, “less is more.”

Source link
#Sequoia #bets #silence #TechCrunch


Johannes Heidecke, the Head of Safety Systems at OpenAI, is leaving. I know what you’re thinking: Hey, didn’t the head of safety at OpenAI just leave?

In fact, it feels like a head of safety at OpenAI is pretty much always leaving. Working in safety leadership—loosely defined—at OpenAI is a little like working as a drummer in the band Spinal Tap; lots of turnover. I’m not the world’s premier OpenAI Kremlinologist, so I might be missing some details and nuance, but here’s my basic timeline:

According to Wired, those previously reporting to Heidecke’s safety teams will be led by Mia Glaese, who is a VP, and also the head of alignment. However, there does seem to be an other replacement for Heidecke, according to Wired. Saachi Jain, former leader of safety teams, will now be an “interim head of safety systems” under Glaese.

What exactly keeps happening inside OpenAI’s offices is anyone’s guess, but OpenAI research chief Mark Chen did at least give Wired a hint, saying, “The demands on safety continue to increase—we are training models at a much faster cadence, and release cycles have come down greatly in turn,” and added, “As a result, we have bigger coordination challenges around safety today than ever before.”

The generous reading is that this is still an immature industry. The points along the chain where safety considerations are needed genuinely may keep jumping around as OpenAI figures out how best to build its products. Perhaps today’s sensible safety test procedure is tomorrow’s unnecessary bottleneck.

And there’s no actual direct evidence for a less generous reading of Heidecke’s departure—for instance, one in which any such consideration is a post-hoc rationalization for a pruning of safety procedures in service of faster product rollouts.

#Safety #Leader #OpenAI #Leftai alignment,AI safety,OpenAI">Yet Another Safety Leader at OpenAI Has Left
                Johannes Heidecke, the Head of Safety Systems at OpenAI, is leaving. I know what you’re thinking: Hey, didn’t the head of safety at OpenAI just leave? In fact, it feels like a head of safety at OpenAI is pretty much always leaving. Working in safety leadership—loosely defined—at OpenAI is a little like working as a drummer in the band Spinal Tap; lots of turnover. I’m not the world’s premier OpenAI Kremlinologist, so I might be missing some details and nuance, but here’s my basic timeline:  According to Wired, those previously reporting to Heidecke’s safety teams will be led by Mia Glaese, who is a VP, and also the head of alignment. However, there does seem to be an other replacement for Heidecke, according to Wired. Saachi Jain, former leader of safety teams, will now be an “interim head of safety systems” under Glaese. What exactly keeps happening inside OpenAI’s offices is anyone’s guess, but OpenAI research chief Mark Chen did at least give Wired a hint, saying, “The demands on safety continue to increase—we are training models at a much faster cadence, and release cycles have come down greatly in turn,” and added, “As a result, we have bigger coordination challenges around safety today than ever before.”

 The generous reading is that this is still an immature industry. The points along the chain where safety considerations are needed genuinely may keep jumping around as OpenAI figures out how best to build its products. Perhaps today’s sensible safety test procedure is tomorrow’s unnecessary bottleneck.

 And there’s no actual direct evidence for a less generous reading of Heidecke’s departure—for instance, one in which any such consideration is a post-hoc rationalization for a pruning of safety procedures in service of faster product rollouts.      #Safety #Leader #OpenAI #Leftai alignment,AI safety,OpenAI

working as a drummer in the band Spinal Tap; lots of turnover. I’m not the world’s premier OpenAI Kremlinologist, so I might be missing some details and nuance, but here’s my basic timeline:

According to Wired, those previously reporting to Heidecke’s safety teams will be led by Mia Glaese, who is a VP, and also the head of alignment. However, there does seem to be an other replacement for Heidecke, according to Wired. Saachi Jain, former leader of safety teams, will now be an “interim head of safety systems” under Glaese.

What exactly keeps happening inside OpenAI’s offices is anyone’s guess, but OpenAI research chief Mark Chen did at least give Wired a hint, saying, “The demands on safety continue to increase—we are training models at a much faster cadence, and release cycles have come down greatly in turn,” and added, “As a result, we have bigger coordination challenges around safety today than ever before.”

The generous reading is that this is still an immature industry. The points along the chain where safety considerations are needed genuinely may keep jumping around as OpenAI figures out how best to build its products. Perhaps today’s sensible safety test procedure is tomorrow’s unnecessary bottleneck.

And there’s no actual direct evidence for a less generous reading of Heidecke’s departure—for instance, one in which any such consideration is a post-hoc rationalization for a pruning of safety procedures in service of faster product rollouts.

#Safety #Leader #OpenAI #Leftai alignment,AI safety,OpenAI">Yet Another Safety Leader at OpenAI Has LeftYet Another Safety Leader at OpenAI Has Left
                Johannes Heidecke, the Head of Safety Systems at OpenAI, is leaving. I know what you’re thinking: Hey, didn’t the head of safety at OpenAI just leave? In fact, it feels like a head of safety at OpenAI is pretty much always leaving. Working in safety leadership—loosely defined—at OpenAI is a little like working as a drummer in the band Spinal Tap; lots of turnover. I’m not the world’s premier OpenAI Kremlinologist, so I might be missing some details and nuance, but here’s my basic timeline:  According to Wired, those previously reporting to Heidecke’s safety teams will be led by Mia Glaese, who is a VP, and also the head of alignment. However, there does seem to be an other replacement for Heidecke, according to Wired. Saachi Jain, former leader of safety teams, will now be an “interim head of safety systems” under Glaese. What exactly keeps happening inside OpenAI’s offices is anyone’s guess, but OpenAI research chief Mark Chen did at least give Wired a hint, saying, “The demands on safety continue to increase—we are training models at a much faster cadence, and release cycles have come down greatly in turn,” and added, “As a result, we have bigger coordination challenges around safety today than ever before.”

 The generous reading is that this is still an immature industry. The points along the chain where safety considerations are needed genuinely may keep jumping around as OpenAI figures out how best to build its products. Perhaps today’s sensible safety test procedure is tomorrow’s unnecessary bottleneck.

 And there’s no actual direct evidence for a less generous reading of Heidecke’s departure—for instance, one in which any such consideration is a post-hoc rationalization for a pruning of safety procedures in service of faster product rollouts.      #Safety #Leader #OpenAI #Leftai alignment,AI safety,OpenAI

Johannes Heidecke, the Head of Safety Systems at OpenAI, is leaving. I know what you’re thinking: Hey, didn’t the head of safety at OpenAI just leave?

In fact, it feels like a head of safety at OpenAI is pretty much always leaving. Working in safety leadership—loosely defined—at OpenAI is a little like working as a drummer in the band Spinal Tap; lots of turnover. I’m not the world’s premier OpenAI Kremlinologist, so I might be missing some details and nuance, but here’s my basic timeline:

According to Wired, those previously reporting to Heidecke’s safety teams will be led by Mia Glaese, who is a VP, and also the head of alignment. However, there does seem to be an other replacement for Heidecke, according to Wired. Saachi Jain, former leader of safety teams, will now be an “interim head of safety systems” under Glaese.

What exactly keeps happening inside OpenAI’s offices is anyone’s guess, but OpenAI research chief Mark Chen did at least give Wired a hint, saying, “The demands on safety continue to increase—we are training models at a much faster cadence, and release cycles have come down greatly in turn,” and added, “As a result, we have bigger coordination challenges around safety today than ever before.”

The generous reading is that this is still an immature industry. The points along the chain where safety considerations are needed genuinely may keep jumping around as OpenAI figures out how best to build its products. Perhaps today’s sensible safety test procedure is tomorrow’s unnecessary bottleneck.

And there’s no actual direct evidence for a less generous reading of Heidecke’s departure—for instance, one in which any such consideration is a post-hoc rationalization for a pruning of safety procedures in service of faster product rollouts.

#Safety #Leader #OpenAI #Leftai alignment,AI safety,OpenAI

Image may contain Adapter Electronics Escooter Transportation and Vehicle

Photograph: Chris Null

Naturally, the AstroRinse also needs a power supply, so if you don’t have a standard electrical outlet near your hose spigot, you’ll need another extension cord solution here. The unit must be level to run properly, and it features adjustable feet and a built-in spirit level to help you achieve that.

All told, you’ll need to carefully consider where you’re going to place the AstroRinse, ensuring you have access to water, power, and drainage—and that the location isn’t too far from the pool. Since the AquaSense X robot itself weighs 29 pounds (and more when freshly pulled from the water), you probably don’t want to haul the thing halfway across the yard to clean and charge it. Unfortunately, given the availability of the above three services in my backyard, that’s exactly what I had to do.

A Familiar Friend in the Water

The Beatbot AquaSense X robot is nearly identical in appearance to the Beatbot AquaSense 2 Ultra except for some changes to the basket design (which is a single piece here instead of two). Setting it up is far simpler than the AstroRinse.

Physical configuration involves installing two side brushes—these are used only by the skimmer function—but this is a fairly quick affair. Once the brushes are attached, the robot must be set on top of the AstroRinse cleaner so the two devices can be wirelessly paired together. (The quick start guide lays out the particular button presses you must do to complete this process; don’t lose it.) Lastly, the system must then be paired to the Beatbot mobile app; you’ll need Bluetooth and a 2.4 GHz or 5 GHz Wi-Fi connection to complete this task. One tiny hiccup I encountered: After completing all this work, both devices downloaded firmware updates, which promptly broke their pairing connection. It was easy to reestablish, however, by simply repeating the pairing process.

Video: Chris Null

After a full charge, I put the cleaner through its paces in the pool on both the floor and the surface, and as expected, I saw no real difference in performance against the AquaSense 2 Ultra. During floor testing with both organic and synthetic debris, the device picked up an average of 97 percent of the test material, doing exceptionally well on steps and platforms. On the surface, the unit was predictably middling to awful, collecting less than half of floating debris and sinking most of the rest. The unit is just too slow to collect much material on the surface, even though its spinning side brushes help, to a small extent, to pull leaves into its maw.

On the floor of the pool, maximum running time is about 41/2 hours, courtesy of a 13,400 mAh battery—the same as the battery on the AquaSense 2 Ultra.

Image may contain Electronics Mobile Phone Phone and Text

ScreenshotBeatbot app via Chris Null

As with other AquaSense robots, a bevy of operating modes are available in the Beatbot app, letting you choose from dozens of potential combinations of floor, wall, waterline, and surface cleaning, each with up to two runs per zone and with various running times. An AI Quick Mode activates the onboard camera to allow the robot to actively search for debris instead of encountering it randomly; it’s good for a quick clean when there’s not much to pick up but more than you can easily fetch with a net.

Again, not much of this is any different from how the AquaSense 2 Ultra behaves, and aside from the poor surface performance, it works outstandingly well.

Charging and Cleaning

On to the main event: cleanup. After each run, the AquaSense X parked itself at the waterline to await retrieval, and I dutifully lugged it across the pool deck to where I had the AstroRinse station set up. While it can take a little trial and error to get the robot seated in just the right spot, once you do, the cleaning system kicks in automatically within a few seconds.

Video: Chris Null

As the rinsing system starts up, the top-mounted arm swings into place and connects with the mouth the robot uses for surface skimming. Then, a high-pressure stream of water (sounding quite loud) begins blasting from the arm and into the filter basket, which is positioned directly below this opening. The water spray runs uninterrupted for three minutes before the arm swings back and the system shuts off. (A quick mode, which runs for one minute, can also be selected in the app.) After that, the arm retracts and the unit is done. Debris is captured in a net-covered basket built into the base of the cleaning station. Any remaining water drains out through a mesh screen at the very bottom of the unit.

Image may contain Car Transportation and Vehicle

Photograph: Chris Null

#Pool #Robot #Cleans #Pooland #Cleansshopping,review,reviews,robots,home,outdoors">This Pool Robot Cleans the Pool—and Then Cleans ItselfPhotograph: Chris NullNaturally, the AstroRinse also needs a power supply, so if you don’t have a standard electrical outlet near your hose spigot, you’ll need another extension cord solution here. The unit must be level to run properly, and it features adjustable feet and a built-in spirit level to help you achieve that.All told, you’ll need to carefully consider where you’re going to place the AstroRinse, ensuring you have access to water, power, and drainage—and that the location isn’t too far from the pool. Since the AquaSense X robot itself weighs 29 pounds (and more when freshly pulled from the water), you probably don’t want to haul the thing halfway across the yard to clean and charge it. Unfortunately, given the availability of the above three services in my backyard, that’s exactly what I had to do.A Familiar Friend in the WaterThe Beatbot AquaSense X robot is nearly identical in appearance to the Beatbot AquaSense 2 Ultra except for some changes to the basket design (which is a single piece here instead of two). Setting it up is far simpler than the AstroRinse.Physical configuration involves installing two side brushes—these are used only by the skimmer function—but this is a fairly quick affair. Once the brushes are attached, the robot must be set on top of the AstroRinse cleaner so the two devices can be wirelessly paired together. (The quick start guide lays out the particular button presses you must do to complete this process; don’t lose it.) Lastly, the system must then be paired to the Beatbot mobile app; you’ll need Bluetooth and a 2.4 GHz or 5 GHz Wi-Fi connection to complete this task. One tiny hiccup I encountered: After completing all this work, both devices downloaded firmware updates, which promptly broke their pairing connection. It was easy to reestablish, however, by simply repeating the pairing process.Video: Chris NullAfter a full charge, I put the cleaner through its paces in the pool on both the floor and the surface, and as expected, I saw no real difference in performance against the AquaSense 2 Ultra. During floor testing with both organic and synthetic debris, the device picked up an average of 97 percent of the test material, doing exceptionally well on steps and platforms. On the surface, the unit was predictably middling to awful, collecting less than half of floating debris and sinking most of the rest. The unit is just too slow to collect much material on the surface, even though its spinning side brushes help, to a small extent, to pull leaves into its maw.On the floor of the pool, maximum running time is about 41/2 hours, courtesy of a 13,400 mAh battery—the same as the battery on the AquaSense 2 Ultra.ScreenshotBeatbot app via Chris NullAs with other AquaSense robots, a bevy of operating modes are available in the Beatbot app, letting you choose from dozens of potential combinations of floor, wall, waterline, and surface cleaning, each with up to two runs per zone and with various running times. An AI Quick Mode activates the onboard camera to allow the robot to actively search for debris instead of encountering it randomly; it’s good for a quick clean when there’s not much to pick up but more than you can easily fetch with a net.Again, not much of this is any different from how the AquaSense 2 Ultra behaves, and aside from the poor surface performance, it works outstandingly well.Charging and CleaningOn to the main event: cleanup. After each run, the AquaSense X parked itself at the waterline to await retrieval, and I dutifully lugged it across the pool deck to where I had the AstroRinse station set up. While it can take a little trial and error to get the robot seated in just the right spot, once you do, the cleaning system kicks in automatically within a few seconds.Video: Chris NullAs the rinsing system starts up, the top-mounted arm swings into place and connects with the mouth the robot uses for surface skimming. Then, a high-pressure stream of water (sounding quite loud) begins blasting from the arm and into the filter basket, which is positioned directly below this opening. The water spray runs uninterrupted for three minutes before the arm swings back and the system shuts off. (A quick mode, which runs for one minute, can also be selected in the app.) After that, the arm retracts and the unit is done. Debris is captured in a net-covered basket built into the base of the cleaning station. Any remaining water drains out through a mesh screen at the very bottom of the unit.Photograph: Chris Null#Pool #Robot #Cleans #Pooland #Cleansshopping,review,reviews,robots,home,outdoors

Beatbot AquaSense 2 Ultra except for some changes to the basket design (which is a single piece here instead of two). Setting it up is far simpler than the AstroRinse.

Physical configuration involves installing two side brushes—these are used only by the skimmer function—but this is a fairly quick affair. Once the brushes are attached, the robot must be set on top of the AstroRinse cleaner so the two devices can be wirelessly paired together. (The quick start guide lays out the particular button presses you must do to complete this process; don’t lose it.) Lastly, the system must then be paired to the Beatbot mobile app; you’ll need Bluetooth and a 2.4 GHz or 5 GHz Wi-Fi connection to complete this task. One tiny hiccup I encountered: After completing all this work, both devices downloaded firmware updates, which promptly broke their pairing connection. It was easy to reestablish, however, by simply repeating the pairing process.

Video: Chris Null

After a full charge, I put the cleaner through its paces in the pool on both the floor and the surface, and as expected, I saw no real difference in performance against the AquaSense 2 Ultra. During floor testing with both organic and synthetic debris, the device picked up an average of 97 percent of the test material, doing exceptionally well on steps and platforms. On the surface, the unit was predictably middling to awful, collecting less than half of floating debris and sinking most of the rest. The unit is just too slow to collect much material on the surface, even though its spinning side brushes help, to a small extent, to pull leaves into its maw.

On the floor of the pool, maximum running time is about 41/2 hours, courtesy of a 13,400 mAh battery—the same as the battery on the AquaSense 2 Ultra.

Image may contain Electronics Mobile Phone Phone and Text

ScreenshotBeatbot app via Chris Null

As with other AquaSense robots, a bevy of operating modes are available in the Beatbot app, letting you choose from dozens of potential combinations of floor, wall, waterline, and surface cleaning, each with up to two runs per zone and with various running times. An AI Quick Mode activates the onboard camera to allow the robot to actively search for debris instead of encountering it randomly; it’s good for a quick clean when there’s not much to pick up but more than you can easily fetch with a net.

Again, not much of this is any different from how the AquaSense 2 Ultra behaves, and aside from the poor surface performance, it works outstandingly well.

Charging and Cleaning

On to the main event: cleanup. After each run, the AquaSense X parked itself at the waterline to await retrieval, and I dutifully lugged it across the pool deck to where I had the AstroRinse station set up. While it can take a little trial and error to get the robot seated in just the right spot, once you do, the cleaning system kicks in automatically within a few seconds.

Video: Chris Null

As the rinsing system starts up, the top-mounted arm swings into place and connects with the mouth the robot uses for surface skimming. Then, a high-pressure stream of water (sounding quite loud) begins blasting from the arm and into the filter basket, which is positioned directly below this opening. The water spray runs uninterrupted for three minutes before the arm swings back and the system shuts off. (A quick mode, which runs for one minute, can also be selected in the app.) After that, the arm retracts and the unit is done. Debris is captured in a net-covered basket built into the base of the cleaning station. Any remaining water drains out through a mesh screen at the very bottom of the unit.

Image may contain Car Transportation and Vehicle

Photograph: Chris Null

#Pool #Robot #Cleans #Pooland #Cleansshopping,review,reviews,robots,home,outdoors">This Pool Robot Cleans the Pool—and Then Cleans Itself
Image may contain Adapter Electronics Escooter Transportation and Vehicle

Photograph: Chris Null

Naturally, the AstroRinse also needs a power supply, so if you don’t have a standard electrical outlet near your hose spigot, you’ll need another extension cord solution here. The unit must be level to run properly, and it features adjustable feet and a built-in spirit level to help you achieve that.

All told, you’ll need to carefully consider where you’re going to place the AstroRinse, ensuring you have access to water, power, and drainage—and that the location isn’t too far from the pool. Since the AquaSense X robot itself weighs 29 pounds (and more when freshly pulled from the water), you probably don’t want to haul the thing halfway across the yard to clean and charge it. Unfortunately, given the availability of the above three services in my backyard, that’s exactly what I had to do.

A Familiar Friend in the Water

The Beatbot AquaSense X robot is nearly identical in appearance to the Beatbot AquaSense 2 Ultra except for some changes to the basket design (which is a single piece here instead of two). Setting it up is far simpler than the AstroRinse.

Physical configuration involves installing two side brushes—these are used only by the skimmer function—but this is a fairly quick affair. Once the brushes are attached, the robot must be set on top of the AstroRinse cleaner so the two devices can be wirelessly paired together. (The quick start guide lays out the particular button presses you must do to complete this process; don’t lose it.) Lastly, the system must then be paired to the Beatbot mobile app; you’ll need Bluetooth and a 2.4 GHz or 5 GHz Wi-Fi connection to complete this task. One tiny hiccup I encountered: After completing all this work, both devices downloaded firmware updates, which promptly broke their pairing connection. It was easy to reestablish, however, by simply repeating the pairing process.

Video: Chris Null

After a full charge, I put the cleaner through its paces in the pool on both the floor and the surface, and as expected, I saw no real difference in performance against the AquaSense 2 Ultra. During floor testing with both organic and synthetic debris, the device picked up an average of 97 percent of the test material, doing exceptionally well on steps and platforms. On the surface, the unit was predictably middling to awful, collecting less than half of floating debris and sinking most of the rest. The unit is just too slow to collect much material on the surface, even though its spinning side brushes help, to a small extent, to pull leaves into its maw.

On the floor of the pool, maximum running time is about 41/2 hours, courtesy of a 13,400 mAh battery—the same as the battery on the AquaSense 2 Ultra.

Image may contain Electronics Mobile Phone Phone and Text

ScreenshotBeatbot app via Chris Null

As with other AquaSense robots, a bevy of operating modes are available in the Beatbot app, letting you choose from dozens of potential combinations of floor, wall, waterline, and surface cleaning, each with up to two runs per zone and with various running times. An AI Quick Mode activates the onboard camera to allow the robot to actively search for debris instead of encountering it randomly; it’s good for a quick clean when there’s not much to pick up but more than you can easily fetch with a net.

Again, not much of this is any different from how the AquaSense 2 Ultra behaves, and aside from the poor surface performance, it works outstandingly well.

Charging and Cleaning

On to the main event: cleanup. After each run, the AquaSense X parked itself at the waterline to await retrieval, and I dutifully lugged it across the pool deck to where I had the AstroRinse station set up. While it can take a little trial and error to get the robot seated in just the right spot, once you do, the cleaning system kicks in automatically within a few seconds.

Video: Chris Null

As the rinsing system starts up, the top-mounted arm swings into place and connects with the mouth the robot uses for surface skimming. Then, a high-pressure stream of water (sounding quite loud) begins blasting from the arm and into the filter basket, which is positioned directly below this opening. The water spray runs uninterrupted for three minutes before the arm swings back and the system shuts off. (A quick mode, which runs for one minute, can also be selected in the app.) After that, the arm retracts and the unit is done. Debris is captured in a net-covered basket built into the base of the cleaning station. Any remaining water drains out through a mesh screen at the very bottom of the unit.

Image may contain Car Transportation and Vehicle

Photograph: Chris Null

#Pool #Robot #Cleans #Pooland #Cleansshopping,review,reviews,robots,home,outdoors

Post Comment