×
A warning for ‘IT: Welcome to Derry’ — with no spoilers

A warning for ‘IT: Welcome to Derry’ — with no spoilers

Tech-news

This weekend, HBO Max will premiere the first episode of IT: Welcome to Derry. This prequel series from Andy Muschietti and Barbara Muschietti, the brother-sister duo behind IT and IT: Chapter Two will give audiences gnarly new tales involving Pennywise the Dancing Clown. Now, fans of the hard-R-rated horror movies starring Bill Skarsgård as Pennywise might think they know what to expect from this new show. Cool, cool, cool. You’re wrong. 

SEE ALSO:

‘IT: Welcome to Derry’ review: ‘IT’ prequel series will scare the living daylights out of you

Mashable’s Entertainment team has been thoroughly gagged — in both ways — by IT: Welcome to Derry, which builds upon three interludes from Stephen King’s novel IT. And while we won’t share spoilers of the horrors about to unfold, we do want to give you a simple warning:

Don’t plan to eat while watching the premiere episode of IT: Welcome to Derry.

Look, you might think you’re too deep into horror, too big a King fan, too staunch in stomach to get it churned by a TV show. But first off, to quote an old but true motto, “It’s not TV. It’s HBO.”

This is the network that gave us the corpsicle of True Detective: Night Country and the absolutely harrowing second season of The Last of Us. HBO originally stood for Home Box Office, but it could stand for Horror Bloody Outrageous. 

Mashable Top Stories

As teased in Belen Edwards’ review, IT: Welcome to Derry doesn’t pull any punches when it comes to its grisly set pieces. And the first episode offers several absolutely gruesome sequences. So, do yourself a favor: Eat or snack well before you sit down for this deranged debut. 

Beyond the stomach-churningness of it all, there’s a lot of setup in this first episode you won’t want to miss. And then there are moments so shocking and twisted you won’t believe your eyes. So set aside the popcorn. Avoid anything red or bloody. Hey, maybe even avoid Cracker Jacks. Trust us.

There are some TV shows, like True Detective and Alien: Earth, that demand your full attention on a full stomach. Because otherwise, it’s gonna be a rough night. 

IT: Welcome to Derry debuts on Sunday, October 26 at 9:00 p.m. ET/PT on HBO, and will be available to stream on HBO Max. New episodes air weekly.

Source link
#warning #Derry #spoilers

Related Posts

At a trendy venue near the San Francisco pier, Sam Altman’s verification project World celebrated its next evolution and rapid expansion of its ambitions.  And it’s starting with Tinder.

Tools for Humanity (TFH), the company behind the World project, announced Friday plans to integrate its verification tech into dating apps, event and concert ticketing systems, business organizations, email, and other arenas of public life.

“The world is getting close to very powerful AI, and this is doing a lot of wonderful things,” said Altman, speaking before a packed crowd at The Midway. “We are also heading to a world now where there’s going to be more stuff generated by AI than by humans,” he added. “I’m sure many of you [have had moments] where you’re like, ‘Am I interacting with an AI or a person, or how much of each, and how do I know?”

World (formerly Worldcoin) distinguishes itself from many of its ID verification peers by offering the ability to verify that a real, living human is using a digital service while still protecting that person’s anonymity. There is some complex cryptographic alchemy behind this (something called “zero-knowledge proof-based authentication”). The upshot: The company is creating what it calls “proof of human” tools, which are mechanisms that can verify human activity in a world rife with AI agents and bots.

Its chief tool for verification is a spherical digital reader called the Orb that scans a user’s eyes, converting their iris into a unique and anonymous cryptographic identifier (known as a verified World ID). This can then be used to access World’s services, although users can also access World’s app without one.

Altman kept his remarks brief on Friday (TFH’s co-founder and CEO, Alex Blania, was absent due to a last-minute hand surgery, Altman said). He then turned much of the presentation over to World’s chief product officer, Tiago Sada, and his team.

Sada explained that World was launching the newest version of its app (the last version was launched at an event in December), along with a plethora of new integrations for its technology.

World has been preparing, for some time, to deploy a verification service for dating apps — most notably, Tinder. Last year, Tinder launched a World ID pilot program in Japan. That pilot was apparently a success because World announced that Tinder would be launching its verification integration in global markets —including the U.S. The program integrates a World ID emblem into the profiles of users who have gone through its verification processes, thus authenticating them as a real person.

Sam Altman’s project World looks to scale its human verification empire. First stop: Tinder. | TechCrunch At a trendy venue near the San Francisco pier, Sam Altman’s verification project World celebrated its next evolution and rapid expansion of its ambitions.  And it’s starting with Tinder. Tools for Humanity (TFH), the company behind the World project, announced Friday plans to integrate its verification tech into dating apps, event and concert ticketing systems, business organizations, email, and other arenas of public life. “The world is getting close to very powerful AI, and this is doing a lot of wonderful things,” said Altman, speaking before a packed crowd at The Midway. “We are also heading to a world now where there’s going to be more stuff generated by AI than by humans,” he added. “I’m sure many of you [have had moments] where you’re like, ‘Am I interacting with an AI or a person, or how much of each, and how do I know?” World (formerly Worldcoin) distinguishes itself from many of its ID verification peers by offering the ability to verify that a real, living human is using a digital service while still protecting that person’s anonymity. There is some complex cryptographic alchemy behind this (something called “zero-knowledge proof-based authentication”). The upshot: The company is creating what it calls “proof of human” tools, which are mechanisms that can verify human activity in a world rife with AI agents and bots. Its chief tool for verification is a spherical digital reader called the Orb that scans a user’s eyes, converting their iris into a unique and anonymous cryptographic identifier (known as a verified World ID). This can then be used to access World’s services, although users can also access World’s app without one. Altman kept his remarks brief on Friday (TFH’s co-founder and CEO, Alex Blania, was absent due to a last-minute hand surgery, Altman said). He then turned much of the presentation over to World’s chief product officer, Tiago Sada, and his team. Sada explained that World was launching the newest version of its app (the last version was launched at an event in December), along with a plethora of new integrations for its technology. World has been preparing, for some time, to deploy a verification service for dating apps — most notably, Tinder. Last year, Tinder launched a World ID pilot program in Japan. That pilot was apparently a success because World announced that Tinder would be launching its verification integration in global markets —including the U.S. The program integrates a World ID emblem into the profiles of users who have gone through its verification processes, thus authenticating them as a real person. Image Credits:World World is also courting the entertainment industry by launching a new feature called Concert Kit, where musical artists can reserve a certain number of concert tickets for World ID-verified humans. This is designed to ensure that fans are safe from scalpers who often use automated ticket-buying bots to scarf up seats. Concert Kit is compatible with major ticketing systems, including Ticketmaster and Eventbrite, and the company is promoting it via partnerships with 30 Seconds to Mars and Bruno Mars — both of whom plan to use it for their upcoming tours. The event was full of many other announcements, including some aimed at businesses. A Zoom/World ID verification integration seeks to battle a supposed deepfake threat to business calls, and a Docusign partnership is designed to ensure signatures come from authentic users. The company is also working on a number of features in anticipation of the Wild West of the agentic web, including one called “agent delegation,” in which a person can delegate their World ID to an agent to carry out online activities on their behalf. A partnership with authentication firm Okta has also created a system (currently in beta) that verifies that an agent is acting on behalf of a human. The system is set up so that a World ID can be tied to a specific agent and then, when the agent goes out into the web to operate on that person’s behalf, websites will know a verified person is behind the behavior, said Okta’s chief product officer, Gareth Davies, at the event. So far, it’s been difficult for World to scale, due largely to the verification process itself. For much of the company’s history, to get its gold standard, you had to travel to one of its offices and have your eyeballs scanned by an Orb — a fairly inconvenient (not to mention weird) experience. Image Credits:World However, World has continually made moves to increase the ease and incentive structure for verification. In the past, it offered its crypto asset, Worldcoin, to some members who signed up and has distributed its Orbs into big retail chains so that users can verify themselves while they’re out shopping or getting a coffee. Now the company is announcing that it is significantly expanding its Orb saturation in New York, Los Angeles, and San Francisco. The company also promoted a service where interested users could have World bring an Orb to their location for remote verification. In a conversation with TechCrunch, Sada also shared that World has attempted to solve the scaling problem by creating different tiers of verification. The highest tier is Orb verification, but below that, World has previously offered a mid-level tier, which uses an anonymized scan of an official government ID via the card’s NFC chip. The company also introduced a low-level tier, or what Sada called “low friction”— meaning low effort, I guess, but also “low security” — which involves merely taking a selfie. Selfie Check, which Sada’s team presented during the event, is designed to maintain user privacy. “Selfie is private by design,” said Daniel Shorr, one of TFH’s executives, during the presentation. “That means that we maximize the local processing that’s happening on your device, on your phone, which means that your images are yours.” Selfie verification obviously isn’t new, and fraudsters have long managed to spoof it. “Obviously, we do our best, and it’s like one of the best systems that you’ll see for this. But it has limits,” Sada told TechCrunch. Developers looking to integrate World’s services can choose from the three different verification tiers depending on the level of security that’s important to them, he noted. #Sam #Altmans #project #World #scale #human #verification #empire #stop #Tinder #TechCrunchDocuSign,sam altman,Tinder,World,Worldcoin,zoom
Image Credits:World

World is also courting the entertainment industry by launching a new feature called Concert Kit, where musical artists can reserve a certain number of concert tickets for World ID-verified humans. This is designed to ensure that fans are safe from scalpers who often use automated ticket-buying bots to scarf up seats. Concert Kit is compatible with major ticketing systems, including Ticketmaster and Eventbrite, and the company is promoting it via partnerships with 30 Seconds to Mars and Bruno Mars — both of whom plan to use it for their upcoming tours.

The event was full of many other announcements, including some aimed at businesses. A Zoom/World ID verification integration seeks to battle a supposed deepfake threat to business calls, and a Docusign partnership is designed to ensure signatures come from authentic users.

The company is also working on a number of features in anticipation of the Wild West of the agentic web, including one called “agent delegation,” in which a person can delegate their World ID to an agent to carry out online activities on their behalf. A partnership with authentication firm Okta has also created a system (currently in beta) that verifies that an agent is acting on behalf of a human. The system is set up so that a World ID can be tied to a specific agent and then, when the agent goes out into the web to operate on that person’s behalf, websites will know a verified person is behind the behavior, said Okta’s chief product officer, Gareth Davies, at the event.

So far, it’s been difficult for World to scale, due largely to the verification process itself. For much of the company’s history, to get its gold standard, you had to travel to one of its offices and have your eyeballs scanned by an Orb — a fairly inconvenient (not to mention weird) experience.

Image Credits:World

However, World has continually made moves to increase the ease and incentive structure for verification. In the past, it offered its crypto asset, Worldcoin, to some members who signed up and has distributed its Orbs into big retail chains so that users can verify themselves while they’re out shopping or getting a coffee. Now the company is announcing that it is significantly expanding its Orb saturation in New York, Los Angeles, and San Francisco. The company also promoted a service where interested users could have World bring an Orb to their location for remote verification.

In a conversation with TechCrunch, Sada also shared that World has attempted to solve the scaling problem by creating different tiers of verification. The highest tier is Orb verification, but below that, World has previously offered a mid-level tier, which uses an anonymized scan of an official government ID via the card’s NFC chip.

The company also introduced a low-level tier, or what Sada called “low friction”— meaning low effort, I guess, but also “low security” — which involves merely taking a selfie.

Selfie Check, which Sada’s team presented during the event, is designed to maintain user privacy.

“Selfie is private by design,” said Daniel Shorr, one of TFH’s executives, during the presentation. “That means that we maximize the local processing that’s happening on your device, on your phone, which means that your images are yours.”

Selfie verification obviously isn’t new, and fraudsters have long managed to spoof it. “Obviously, we do our best, and it’s like one of the best systems that you’ll see for this. But it has limits,” Sada told TechCrunch. Developers looking to integrate World’s services can choose from the three different verification tiers depending on the level of security that’s important to them, he noted.

#Sam #Altmans #project #World #scale #human #verification #empire #stop #Tinder #TechCrunchDocuSign,sam altman,Tinder,World,Worldcoin,zoom">Sam Altman’s project World looks to scale its human verification empire. First stop: Tinder. | TechCrunch At a trendy venue near the San Francisco pier, Sam Altman’s verification project World celebrated its next evolution and rapid expansion of its ambitions.  And it’s starting with Tinder. Tools for Humanity (TFH), the company behind the World project, announced Friday plans to integrate its verification tech into dating apps, event and concert ticketing systems, business organizations, email, and other arenas of public life. “The world is getting close to very powerful AI, and this is doing a lot of wonderful things,” said Altman, speaking before a packed crowd at The Midway. “We are also heading to a world now where there’s going to be more stuff generated by AI than by humans,” he added. “I’m sure many of you [have had moments] where you’re like, ‘Am I interacting with an AI or a person, or how much of each, and how do I know?” World (formerly Worldcoin) distinguishes itself from many of its ID verification peers by offering the ability to verify that a real, living human is using a digital service while still protecting that person’s anonymity. There is some complex cryptographic alchemy behind this (something called “zero-knowledge proof-based authentication”). The upshot: The company is creating what it calls “proof of human” tools, which are mechanisms that can verify human activity in a world rife with AI agents and bots. Its chief tool for verification is a spherical digital reader called the Orb that scans a user’s eyes, converting their iris into a unique and anonymous cryptographic identifier (known as a verified World ID). This can then be used to access World’s services, although users can also access World’s app without one. Altman kept his remarks brief on Friday (TFH’s co-founder and CEO, Alex Blania, was absent due to a last-minute hand surgery, Altman said). He then turned much of the presentation over to World’s chief product officer, Tiago Sada, and his team. Sada explained that World was launching the newest version of its app (the last version was launched at an event in December), along with a plethora of new integrations for its technology. World has been preparing, for some time, to deploy a verification service for dating apps — most notably, Tinder. Last year, Tinder launched a World ID pilot program in Japan. That pilot was apparently a success because World announced that Tinder would be launching its verification integration in global markets —including the U.S. The program integrates a World ID emblem into the profiles of users who have gone through its verification processes, thus authenticating them as a real person. Image Credits:World World is also courting the entertainment industry by launching a new feature called Concert Kit, where musical artists can reserve a certain number of concert tickets for World ID-verified humans. This is designed to ensure that fans are safe from scalpers who often use automated ticket-buying bots to scarf up seats. Concert Kit is compatible with major ticketing systems, including Ticketmaster and Eventbrite, and the company is promoting it via partnerships with 30 Seconds to Mars and Bruno Mars — both of whom plan to use it for their upcoming tours. The event was full of many other announcements, including some aimed at businesses. A Zoom/World ID verification integration seeks to battle a supposed deepfake threat to business calls, and a Docusign partnership is designed to ensure signatures come from authentic users. The company is also working on a number of features in anticipation of the Wild West of the agentic web, including one called “agent delegation,” in which a person can delegate their World ID to an agent to carry out online activities on their behalf. A partnership with authentication firm Okta has also created a system (currently in beta) that verifies that an agent is acting on behalf of a human. The system is set up so that a World ID can be tied to a specific agent and then, when the agent goes out into the web to operate on that person’s behalf, websites will know a verified person is behind the behavior, said Okta’s chief product officer, Gareth Davies, at the event. So far, it’s been difficult for World to scale, due largely to the verification process itself. For much of the company’s history, to get its gold standard, you had to travel to one of its offices and have your eyeballs scanned by an Orb — a fairly inconvenient (not to mention weird) experience. Image Credits:World However, World has continually made moves to increase the ease and incentive structure for verification. In the past, it offered its crypto asset, Worldcoin, to some members who signed up and has distributed its Orbs into big retail chains so that users can verify themselves while they’re out shopping or getting a coffee. Now the company is announcing that it is significantly expanding its Orb saturation in New York, Los Angeles, and San Francisco. The company also promoted a service where interested users could have World bring an Orb to their location for remote verification. In a conversation with TechCrunch, Sada also shared that World has attempted to solve the scaling problem by creating different tiers of verification. The highest tier is Orb verification, but below that, World has previously offered a mid-level tier, which uses an anonymized scan of an official government ID via the card’s NFC chip. The company also introduced a low-level tier, or what Sada called “low friction”— meaning low effort, I guess, but also “low security” — which involves merely taking a selfie. Selfie Check, which Sada’s team presented during the event, is designed to maintain user privacy. “Selfie is private by design,” said Daniel Shorr, one of TFH’s executives, during the presentation. “That means that we maximize the local processing that’s happening on your device, on your phone, which means that your images are yours.” Selfie verification obviously isn’t new, and fraudsters have long managed to spoof it. “Obviously, we do our best, and it’s like one of the best systems that you’ll see for this. But it has limits,” Sada told TechCrunch. Developers looking to integrate World’s services can choose from the three different verification tiers depending on the level of security that’s important to them, he noted. #Sam #Altmans #project #World #scale #human #verification #empire #stop #Tinder #TechCrunchDocuSign,sam altman,Tinder,World,Worldcoin,zoom

verification project World celebrated its next evolution and rapid expansion of its ambitions.  And it’s starting with Tinder.

Tools for Humanity (TFH), the company behind the World project, announced Friday plans to integrate its verification tech into dating apps, event and concert ticketing systems, business organizations, email, and other arenas of public life.

“The world is getting close to very powerful AI, and this is doing a lot of wonderful things,” said Altman, speaking before a packed crowd at The Midway. “We are also heading to a world now where there’s going to be more stuff generated by AI than by humans,” he added. “I’m sure many of you [have had moments] where you’re like, ‘Am I interacting with an AI or a person, or how much of each, and how do I know?”

World (formerly Worldcoin) distinguishes itself from many of its ID verification peers by offering the ability to verify that a real, living human is using a digital service while still protecting that person’s anonymity. There is some complex cryptographic alchemy behind this (something called “zero-knowledge proof-based authentication”). The upshot: The company is creating what it calls “proof of human” tools, which are mechanisms that can verify human activity in a world rife with AI agents and bots.

Its chief tool for verification is a spherical digital reader called the Orb that scans a user’s eyes, converting their iris into a unique and anonymous cryptographic identifier (known as a verified World ID). This can then be used to access World’s services, although users can also access World’s app without one.

Altman kept his remarks brief on Friday (TFH’s co-founder and CEO, Alex Blania, was absent due to a last-minute hand surgery, Altman said). He then turned much of the presentation over to World’s chief product officer, Tiago Sada, and his team.

Sada explained that World was launching the newest version of its app (the last version was launched at an event in December), along with a plethora of new integrations for its technology.

World has been preparing, for some time, to deploy a verification service for dating apps — most notably, Tinder. Last year, Tinder launched a World ID pilot program in Japan. That pilot was apparently a success because World announced that Tinder would be launching its verification integration in global markets —including the U.S. The program integrates a World ID emblem into the profiles of users who have gone through its verification processes, thus authenticating them as a real person.

Sam Altman’s project World looks to scale its human verification empire. First stop: Tinder. | TechCrunch At a trendy venue near the San Francisco pier, Sam Altman’s verification project World celebrated its next evolution and rapid expansion of its ambitions.  And it’s starting with Tinder. Tools for Humanity (TFH), the company behind the World project, announced Friday plans to integrate its verification tech into dating apps, event and concert ticketing systems, business organizations, email, and other arenas of public life. “The world is getting close to very powerful AI, and this is doing a lot of wonderful things,” said Altman, speaking before a packed crowd at The Midway. “We are also heading to a world now where there’s going to be more stuff generated by AI than by humans,” he added. “I’m sure many of you [have had moments] where you’re like, ‘Am I interacting with an AI or a person, or how much of each, and how do I know?” World (formerly Worldcoin) distinguishes itself from many of its ID verification peers by offering the ability to verify that a real, living human is using a digital service while still protecting that person’s anonymity. There is some complex cryptographic alchemy behind this (something called “zero-knowledge proof-based authentication”). The upshot: The company is creating what it calls “proof of human” tools, which are mechanisms that can verify human activity in a world rife with AI agents and bots. Its chief tool for verification is a spherical digital reader called the Orb that scans a user’s eyes, converting their iris into a unique and anonymous cryptographic identifier (known as a verified World ID). This can then be used to access World’s services, although users can also access World’s app without one. Altman kept his remarks brief on Friday (TFH’s co-founder and CEO, Alex Blania, was absent due to a last-minute hand surgery, Altman said). He then turned much of the presentation over to World’s chief product officer, Tiago Sada, and his team. Sada explained that World was launching the newest version of its app (the last version was launched at an event in December), along with a plethora of new integrations for its technology. World has been preparing, for some time, to deploy a verification service for dating apps — most notably, Tinder. Last year, Tinder launched a World ID pilot program in Japan. That pilot was apparently a success because World announced that Tinder would be launching its verification integration in global markets —including the U.S. The program integrates a World ID emblem into the profiles of users who have gone through its verification processes, thus authenticating them as a real person. Image Credits:World World is also courting the entertainment industry by launching a new feature called Concert Kit, where musical artists can reserve a certain number of concert tickets for World ID-verified humans. This is designed to ensure that fans are safe from scalpers who often use automated ticket-buying bots to scarf up seats. Concert Kit is compatible with major ticketing systems, including Ticketmaster and Eventbrite, and the company is promoting it via partnerships with 30 Seconds to Mars and Bruno Mars — both of whom plan to use it for their upcoming tours. The event was full of many other announcements, including some aimed at businesses. A Zoom/World ID verification integration seeks to battle a supposed deepfake threat to business calls, and a Docusign partnership is designed to ensure signatures come from authentic users. The company is also working on a number of features in anticipation of the Wild West of the agentic web, including one called “agent delegation,” in which a person can delegate their World ID to an agent to carry out online activities on their behalf. A partnership with authentication firm Okta has also created a system (currently in beta) that verifies that an agent is acting on behalf of a human. The system is set up so that a World ID can be tied to a specific agent and then, when the agent goes out into the web to operate on that person’s behalf, websites will know a verified person is behind the behavior, said Okta’s chief product officer, Gareth Davies, at the event. So far, it’s been difficult for World to scale, due largely to the verification process itself. For much of the company’s history, to get its gold standard, you had to travel to one of its offices and have your eyeballs scanned by an Orb — a fairly inconvenient (not to mention weird) experience. Image Credits:World However, World has continually made moves to increase the ease and incentive structure for verification. In the past, it offered its crypto asset, Worldcoin, to some members who signed up and has distributed its Orbs into big retail chains so that users can verify themselves while they’re out shopping or getting a coffee. Now the company is announcing that it is significantly expanding its Orb saturation in New York, Los Angeles, and San Francisco. The company also promoted a service where interested users could have World bring an Orb to their location for remote verification. In a conversation with TechCrunch, Sada also shared that World has attempted to solve the scaling problem by creating different tiers of verification. The highest tier is Orb verification, but below that, World has previously offered a mid-level tier, which uses an anonymized scan of an official government ID via the card’s NFC chip. The company also introduced a low-level tier, or what Sada called “low friction”— meaning low effort, I guess, but also “low security” — which involves merely taking a selfie. Selfie Check, which Sada’s team presented during the event, is designed to maintain user privacy. “Selfie is private by design,” said Daniel Shorr, one of TFH’s executives, during the presentation. “That means that we maximize the local processing that’s happening on your device, on your phone, which means that your images are yours.” Selfie verification obviously isn’t new, and fraudsters have long managed to spoof it. “Obviously, we do our best, and it’s like one of the best systems that you’ll see for this. But it has limits,” Sada told TechCrunch. Developers looking to integrate World’s services can choose from the three different verification tiers depending on the level of security that’s important to them, he noted. #Sam #Altmans #project #World #scale #human #verification #empire #stop #Tinder #TechCrunchDocuSign,sam altman,Tinder,World,Worldcoin,zoom
Image Credits:World

World is also courting the entertainment industry by launching a new feature called Concert Kit, where musical artists can reserve a certain number of concert tickets for World ID-verified humans. This is designed to ensure that fans are safe from scalpers who often use automated ticket-buying bots to scarf up seats. Concert Kit is compatible with major ticketing systems, including Ticketmaster and Eventbrite, and the company is promoting it via partnerships with 30 Seconds to Mars and Bruno Mars — both of whom plan to use it for their upcoming tours.

The event was full of many other announcements, including some aimed at businesses. A Zoom/World ID verification integration seeks to battle a supposed deepfake threat to business calls, and a Docusign partnership is designed to ensure signatures come from authentic users.

The company is also working on a number of features in anticipation of the Wild West of the agentic web, including one called “agent delegation,” in which a person can delegate their World ID to an agent to carry out online activities on their behalf. A partnership with authentication firm Okta has also created a system (currently in beta) that verifies that an agent is acting on behalf of a human. The system is set up so that a World ID can be tied to a specific agent and then, when the agent goes out into the web to operate on that person’s behalf, websites will know a verified person is behind the behavior, said Okta’s chief product officer, Gareth Davies, at the event.

So far, it’s been difficult for World to scale, due largely to the verification process itself. For much of the company’s history, to get its gold standard, you had to travel to one of its offices and have your eyeballs scanned by an Orb — a fairly inconvenient (not to mention weird) experience.

Image Credits:World

However, World has continually made moves to increase the ease and incentive structure for verification. In the past, it offered its crypto asset, Worldcoin, to some members who signed up and has distributed its Orbs into big retail chains so that users can verify themselves while they’re out shopping or getting a coffee. Now the company is announcing that it is significantly expanding its Orb saturation in New York, Los Angeles, and San Francisco. The company also promoted a service where interested users could have World bring an Orb to their location for remote verification.

In a conversation with TechCrunch, Sada also shared that World has attempted to solve the scaling problem by creating different tiers of verification. The highest tier is Orb verification, but below that, World has previously offered a mid-level tier, which uses an anonymized scan of an official government ID via the card’s NFC chip.

The company also introduced a low-level tier, or what Sada called “low friction”— meaning low effort, I guess, but also “low security” — which involves merely taking a selfie.

Selfie Check, which Sada’s team presented during the event, is designed to maintain user privacy.

“Selfie is private by design,” said Daniel Shorr, one of TFH’s executives, during the presentation. “That means that we maximize the local processing that’s happening on your device, on your phone, which means that your images are yours.”

Selfie verification obviously isn’t new, and fraudsters have long managed to spoof it. “Obviously, we do our best, and it’s like one of the best systems that you’ll see for this. But it has limits,” Sada told TechCrunch. Developers looking to integrate World’s services can choose from the three different verification tiers depending on the level of security that’s important to them, he noted.

#Sam #Altmans #project #World #scale #human #verification #empire #stop #Tinder #TechCrunchDocuSign,sam altman,Tinder,World,Worldcoin,zoom">Sam Altman’s project World looks to scale its human verification empire. First stop: Tinder. | TechCrunch

At a trendy venue near the San Francisco pier, Sam Altman’s verification project World celebrated its next evolution and rapid expansion of its ambitions.  And it’s starting with Tinder.

Tools for Humanity (TFH), the company behind the World project, announced Friday plans to integrate its verification tech into dating apps, event and concert ticketing systems, business organizations, email, and other arenas of public life.

“The world is getting close to very powerful AI, and this is doing a lot of wonderful things,” said Altman, speaking before a packed crowd at The Midway. “We are also heading to a world now where there’s going to be more stuff generated by AI than by humans,” he added. “I’m sure many of you [have had moments] where you’re like, ‘Am I interacting with an AI or a person, or how much of each, and how do I know?”

World (formerly Worldcoin) distinguishes itself from many of its ID verification peers by offering the ability to verify that a real, living human is using a digital service while still protecting that person’s anonymity. There is some complex cryptographic alchemy behind this (something called “zero-knowledge proof-based authentication”). The upshot: The company is creating what it calls “proof of human” tools, which are mechanisms that can verify human activity in a world rife with AI agents and bots.

Its chief tool for verification is a spherical digital reader called the Orb that scans a user’s eyes, converting their iris into a unique and anonymous cryptographic identifier (known as a verified World ID). This can then be used to access World’s services, although users can also access World’s app without one.

Altman kept his remarks brief on Friday (TFH’s co-founder and CEO, Alex Blania, was absent due to a last-minute hand surgery, Altman said). He then turned much of the presentation over to World’s chief product officer, Tiago Sada, and his team.

Sada explained that World was launching the newest version of its app (the last version was launched at an event in December), along with a plethora of new integrations for its technology.

World has been preparing, for some time, to deploy a verification service for dating apps — most notably, Tinder. Last year, Tinder launched a World ID pilot program in Japan. That pilot was apparently a success because World announced that Tinder would be launching its verification integration in global markets —including the U.S. The program integrates a World ID emblem into the profiles of users who have gone through its verification processes, thus authenticating them as a real person.

Sam Altman’s project World looks to scale its human verification empire. First stop: Tinder. | TechCrunch At a trendy venue near the San Francisco pier, Sam Altman’s verification project World celebrated its next evolution and rapid expansion of its ambitions.  And it’s starting with Tinder. Tools for Humanity (TFH), the company behind the World project, announced Friday plans to integrate its verification tech into dating apps, event and concert ticketing systems, business organizations, email, and other arenas of public life. “The world is getting close to very powerful AI, and this is doing a lot of wonderful things,” said Altman, speaking before a packed crowd at The Midway. “We are also heading to a world now where there’s going to be more stuff generated by AI than by humans,” he added. “I’m sure many of you [have had moments] where you’re like, ‘Am I interacting with an AI or a person, or how much of each, and how do I know?” World (formerly Worldcoin) distinguishes itself from many of its ID verification peers by offering the ability to verify that a real, living human is using a digital service while still protecting that person’s anonymity. There is some complex cryptographic alchemy behind this (something called “zero-knowledge proof-based authentication”). The upshot: The company is creating what it calls “proof of human” tools, which are mechanisms that can verify human activity in a world rife with AI agents and bots. Its chief tool for verification is a spherical digital reader called the Orb that scans a user’s eyes, converting their iris into a unique and anonymous cryptographic identifier (known as a verified World ID). This can then be used to access World’s services, although users can also access World’s app without one. Altman kept his remarks brief on Friday (TFH’s co-founder and CEO, Alex Blania, was absent due to a last-minute hand surgery, Altman said). He then turned much of the presentation over to World’s chief product officer, Tiago Sada, and his team. Sada explained that World was launching the newest version of its app (the last version was launched at an event in December), along with a plethora of new integrations for its technology. World has been preparing, for some time, to deploy a verification service for dating apps — most notably, Tinder. Last year, Tinder launched a World ID pilot program in Japan. That pilot was apparently a success because World announced that Tinder would be launching its verification integration in global markets —including the U.S. The program integrates a World ID emblem into the profiles of users who have gone through its verification processes, thus authenticating them as a real person. Image Credits:World World is also courting the entertainment industry by launching a new feature called Concert Kit, where musical artists can reserve a certain number of concert tickets for World ID-verified humans. This is designed to ensure that fans are safe from scalpers who often use automated ticket-buying bots to scarf up seats. Concert Kit is compatible with major ticketing systems, including Ticketmaster and Eventbrite, and the company is promoting it via partnerships with 30 Seconds to Mars and Bruno Mars — both of whom plan to use it for their upcoming tours. The event was full of many other announcements, including some aimed at businesses. A Zoom/World ID verification integration seeks to battle a supposed deepfake threat to business calls, and a Docusign partnership is designed to ensure signatures come from authentic users. The company is also working on a number of features in anticipation of the Wild West of the agentic web, including one called “agent delegation,” in which a person can delegate their World ID to an agent to carry out online activities on their behalf. A partnership with authentication firm Okta has also created a system (currently in beta) that verifies that an agent is acting on behalf of a human. The system is set up so that a World ID can be tied to a specific agent and then, when the agent goes out into the web to operate on that person’s behalf, websites will know a verified person is behind the behavior, said Okta’s chief product officer, Gareth Davies, at the event. So far, it’s been difficult for World to scale, due largely to the verification process itself. For much of the company’s history, to get its gold standard, you had to travel to one of its offices and have your eyeballs scanned by an Orb — a fairly inconvenient (not to mention weird) experience. Image Credits:World However, World has continually made moves to increase the ease and incentive structure for verification. In the past, it offered its crypto asset, Worldcoin, to some members who signed up and has distributed its Orbs into big retail chains so that users can verify themselves while they’re out shopping or getting a coffee. Now the company is announcing that it is significantly expanding its Orb saturation in New York, Los Angeles, and San Francisco. The company also promoted a service where interested users could have World bring an Orb to their location for remote verification. In a conversation with TechCrunch, Sada also shared that World has attempted to solve the scaling problem by creating different tiers of verification. The highest tier is Orb verification, but below that, World has previously offered a mid-level tier, which uses an anonymized scan of an official government ID via the card’s NFC chip. The company also introduced a low-level tier, or what Sada called “low friction”— meaning low effort, I guess, but also “low security” — which involves merely taking a selfie. Selfie Check, which Sada’s team presented during the event, is designed to maintain user privacy. “Selfie is private by design,” said Daniel Shorr, one of TFH’s executives, during the presentation. “That means that we maximize the local processing that’s happening on your device, on your phone, which means that your images are yours.” Selfie verification obviously isn’t new, and fraudsters have long managed to spoof it. “Obviously, we do our best, and it’s like one of the best systems that you’ll see for this. But it has limits,” Sada told TechCrunch. Developers looking to integrate World’s services can choose from the three different verification tiers depending on the level of security that’s important to them, he noted. #Sam #Altmans #project #World #scale #human #verification #empire #stop #Tinder #TechCrunchDocuSign,sam altman,Tinder,World,Worldcoin,zoom
Image Credits:World

World is also courting the entertainment industry by launching a new feature called Concert Kit, where musical artists can reserve a certain number of concert tickets for World ID-verified humans. This is designed to ensure that fans are safe from scalpers who often use automated ticket-buying bots to scarf up seats. Concert Kit is compatible with major ticketing systems, including Ticketmaster and Eventbrite, and the company is promoting it via partnerships with 30 Seconds to Mars and Bruno Mars — both of whom plan to use it for their upcoming tours.

The event was full of many other announcements, including some aimed at businesses. A Zoom/World ID verification integration seeks to battle a supposed deepfake threat to business calls, and a Docusign partnership is designed to ensure signatures come from authentic users.

The company is also working on a number of features in anticipation of the Wild West of the agentic web, including one called “agent delegation,” in which a person can delegate their World ID to an agent to carry out online activities on their behalf. A partnership with authentication firm Okta has also created a system (currently in beta) that verifies that an agent is acting on behalf of a human. The system is set up so that a World ID can be tied to a specific agent and then, when the agent goes out into the web to operate on that person’s behalf, websites will know a verified person is behind the behavior, said Okta’s chief product officer, Gareth Davies, at the event.

So far, it’s been difficult for World to scale, due largely to the verification process itself. For much of the company’s history, to get its gold standard, you had to travel to one of its offices and have your eyeballs scanned by an Orb — a fairly inconvenient (not to mention weird) experience.

Image Credits:World

However, World has continually made moves to increase the ease and incentive structure for verification. In the past, it offered its crypto asset, Worldcoin, to some members who signed up and has distributed its Orbs into big retail chains so that users can verify themselves while they’re out shopping or getting a coffee. Now the company is announcing that it is significantly expanding its Orb saturation in New York, Los Angeles, and San Francisco. The company also promoted a service where interested users could have World bring an Orb to their location for remote verification.

In a conversation with TechCrunch, Sada also shared that World has attempted to solve the scaling problem by creating different tiers of verification. The highest tier is Orb verification, but below that, World has previously offered a mid-level tier, which uses an anonymized scan of an official government ID via the card’s NFC chip.

The company also introduced a low-level tier, or what Sada called “low friction”— meaning low effort, I guess, but also “low security” — which involves merely taking a selfie.

Selfie Check, which Sada’s team presented during the event, is designed to maintain user privacy.

“Selfie is private by design,” said Daniel Shorr, one of TFH’s executives, during the presentation. “That means that we maximize the local processing that’s happening on your device, on your phone, which means that your images are yours.”

Selfie verification obviously isn’t new, and fraudsters have long managed to spoof it. “Obviously, we do our best, and it’s like one of the best systems that you’ll see for this. But it has limits,” Sada told TechCrunch. Developers looking to integrate World’s services can choose from the three different verification tiers depending on the level of security that’s important to them, he noted.

#Sam #Altmans #project #World #scale #human #verification #empire #stop #Tinder #TechCrunchDocuSign,sam altman,Tinder,World,Worldcoin,zoom
Pro X2 Superstrike, has seen this trend and just said, “yeah, no.”

So, what’s the Pro X2 Superstrike about? It’s a mouse, of course, that takes the clicks of a conventional one and throws them away. Instead, the Superstrike takes a page from the MacBook playbook by borrowing its haptic motors for the clicking mechanism. It’s something that’s never been done before, yet still makes a ton of sense for serious gamers. But are these latency benefits even worth it? To answer this very question, I used the Pro X2 Superstrike for over two weeks. Spoiler alert: it might be the best gaming mouse I’ve used. Here’s why.

Logitech Pro X2 Superstrike Review

Hisan Kidwai

Summary

The Logitech Pro X2 Superstrike is something genuinely different. The haptic buttons are one-of-a-kind and work exceptionally well for both gaming and general productivity. In fast-paced games, the reduced actuation distance can actually make a noticeable difference to reaction times. The Logitech G Hub software is easy to use and offers plenty of customization, while the lightweight design makes it comfortable for long sessions.

Design & No Clicks???

Logitech Pro X2 Superstrike Review: This Gaming Mouse Has No Clicks and It’s Perfect Gaming mice used to be at the forefront of exciting features, with brands working hard to gain a competitive edge. Sadly, that hasn’t happened in the last few years, as we’ve slowly gone down the numbers-game road, which isn’t scenic at all. These days, it’s only about which mouse has a DPI reaching high enough to operate a projector screen, or a weight so light it’s difficult to comprehend if you’re even holding something or not. Logitech, however, with its all-new Pro X2 Superstrike, has seen this trend and just said, “yeah, no.” So, what’s the Pro X2 Superstrike about? It’s a mouse, of course, that takes the clicks of a conventional one and throws them away. Instead, the Superstrike takes a page from the MacBook playbook by borrowing its haptic motors for the clicking mechanism. It’s something that’s never been done before, yet still makes a ton of sense for serious gamers. But are these latency benefits even worth it? To answer this very question, I used the Pro X2 Superstrike for over two weeks. Spoiler alert: it might be the best gaming mouse I’ve used. Here’s why. Logitech Pro X2 Superstrike ReviewHisan KidwaiSummaryThe Logitech Pro X2 Superstrike is something genuinely different. The haptic buttons are one-of-a-kind and work exceptionally well for both gaming and general productivity. In fast-paced games, the reduced actuation distance can actually make a noticeable difference to reaction times. The Logitech G Hub software is easy to use and offers plenty of customization, while the lightweight design makes it comfortable for long sessions. Design & No Clicks??? Despite the all-new mechanism, which we’ll talk about soon, Logitech hasn’t changed much about the Superstrike’s design. Instead, it bears a striking resemblance to the SuperLight 2, and that’s not a bad thing. I’m a fan of this new Stormtrooper-inspired color with the white shell and black buttons. The shape is fairly standard without all the ergonomic trickery. The finish is smooth, doesn’t attract any fingerprints, and is super easy to clean, if you like eating Doritos like me when gaming. Weight is kept at 61g, for which the company pulled a lot of strings, like using titanium screws and drilling holes in the PCB. While comfort is subjective, my pain-prone wrists did like the Superstrike during long gaming sessions. Let’s talk buttons and clicks. The two extra buttons on the left side are the standard kind, meaning they push down when you press them. The real magic happens on the left and right clicks. Logitech has developed a new system called HITS (Haptic Inductive Trigger System). It’s a bit of a mouthful for something that means the mouse combines tiny haptic motors with an electrical sensor to register a click. Remember the Hall Effect on the keyboard? It’s pretty much the same thing, except you can change when the click is registered. The benefits of this system are pretty obvious. In most mice, the click is activated after 0.6mm of travel. It’s not a lot, but still more than an eSports player in the heat of a battle would like. With the Superstrike, you can set it to activate after just 0.1mm of travel. That’s incredibly sensitive and means your movements will be registered faster than anyone else’s when coming out of a corner in Valorant or CS2. Logitech claims up to a 30ms reduction in latency. Speaking of those clicks, I do like them a lot. If you’ve used a MacBook trackpad, then these would be familiar. They are not quite as sharp but still really tactile. You can configure how hard the click should be. The feedback at the highest setting is simply lovely, and I’d actually much rather have these than buttons. What makes things even better is the consistency. Usually, when playing games that require rapid right-clicking, you need to press the button at the optimal area to minimize resistance. But with the Superstrike, you can tap anywhere, and both the feedback and actuation would remain the same. Gaming on the Logitech Pro X2 Superstrike Let me get one thing straight: the Pro X2 Superstrike won’t make a bad gamer like me into an eSports player. It can, however, put a good player into eSports territory. I noticed that difference right away, when I first used the mouse, and thought, “Yup, this is it.” Logitech’s Hero sensors play beautifully with the HITS system. Sure, DPI can be set to an oblivion-like 44,000, but for the sake of my tiny 27-inch monitor, I kept it between 900 and 2,000. Tracking was more precise than any other mouse I’ve tested. Let’s talk numbers. For testing, I picked up a generic ASUS mouse that used the same 2.5 GHz connection. The software of choice was AimLabs, a training ground for players to improve their reaction time by quickly hitting different objects on the screen. I first locked in with the regular mouse (three tries) and got an average reaction time of 243ms (not bad, right?). Then I switched to the Superstrike, with the clicks set to activate as soon as possible. In my best attempt, the reaction time was 218ms, which was noticeably better than my usual results. But that’s not all the Superstrike has to offer. That’s because it introduces Rapid Triggers to a mouse for the very first time. For the uninitiated, Rapid Triggers are a keyboard technology that allows the keys to reset and re-actuate instantly after a slight lift of your finger. I loved how it all comes together in games like CS2, where I went from averaging a few kills to at least landing some headshots. And that pretty much explains the Pro X2 Superstrike. It’s the best tool for gaming, and something you can rely on to help climb the eSports ladder. For all my fellow Excel and Google Sheets users, while Superstrike isn’t really designed for productivity, I still used it as my daily driver for research. The results? I was doing spreadsheets a tad bit quicker thanks to the haptic clicks, which I configured to perfection. After a long day of work, I also noticed that my index finger didn’t hurt as much with a normal mouse. Software & Customization I talked about the customization part above, but to reiterate, the G Hub app handles it all. It’s available on both macOS and Windows and works pretty well. The app is neatly laid out with different sections. At the top is Sensitivity, which, as the name suggests, lets you adjust the DPI. If you’re new, Logitech has a bunch of presets baked in for different types of games. You can adjust the XY axis split, too. Beyond that, there are Assignments that let you assign different functions to the buttons and configure macros. The Scroll Wheel section has BHOP mode, designed to prevent activation from accidental bumps on the scroll wheel. The real star is the HITS Configuration. Here, you adjust the Actuation point, or the point at which the haptic system registers a click. It can be set from a scale of 0-10, with zero requiring the least effort, and is better for gaming. Then there’s the Rapid Trigger adjustment, and lastly, Click Haptics. While a stronger haptic results in higher battery drain, I didn’t worry much as the Superstrike’s battery life is impressive. It lasted more than a week on a single charge, and I used it as my primary work mouse every day for 8 hours, too. Verdict At 9.99 or ₹23,995 on Amazon in India, I agree that the Logitech Pro X2 Superstrike is a premium mouse. But unlike others, it’s something genuinely different. The haptic buttons are one-of-a-kind and work exceptionally well for both gaming and general productivity. In fast-paced games, the reduced actuation distance can actually make a noticeable difference to reaction times. The Logitech G Hub software is easy to use and offers plenty of customization, while the lightweight design makes it comfortable for long sessions. I’m sure we’ll see this tech being copied by others, but until then, if you’re shopping for a serious mouse, the Logitech Pro X2 Superstrike should be on your list. #Logitech #Pro #Superstrike #Review #Gaming #Mouse #Clicks #Perfectlogitech

Despite the all-new mechanism, which we’ll talk about soon, Logitech hasn’t changed much about the Superstrike’s design. Instead, it bears a striking resemblance to the SuperLight 2, and that’s not a bad thing. I’m a fan of this new Stormtrooper-inspired color with the white shell and black buttons. The shape is fairly standard without all the ergonomic trickery. The finish is smooth, doesn’t attract any fingerprints, and is super easy to clean, if you like eating Doritos like me when gaming. Weight is kept at 61g, for which the company pulled a lot of strings, like using titanium screws and drilling holes in the PCB. While comfort is subjective, my pain-prone wrists did like the Superstrike during long gaming sessions.

Let’s talk buttons and clicks. The two extra buttons on the left side are the standard kind, meaning they push down when you press them. The real magic happens on the left and right clicks. Logitech has developed a new system called HITS (Haptic Inductive Trigger System). It’s a bit of a mouthful for something that means the mouse combines tiny haptic motors with an electrical sensor to register a click. Remember the Hall Effect on the keyboard? It’s pretty much the same thing, except you can change when the click is registered.

Closeup of the HITS clicks

The benefits of this system are pretty obvious. In most mice, the click is activated after 0.6mm of travel. It’s not a lot, but still more than an eSports player in the heat of a battle would like. With the Superstrike, you can set it to activate after just 0.1mm of travel. That’s incredibly sensitive and means your movements will be registered faster than anyone else’s when coming out of a corner in Valorant or CS2. Logitech claims up to a 30ms reduction in latency.

Speaking of those clicks, I do like them a lot. If you’ve used a MacBook trackpad, then these would be familiar. They are not quite as sharp but still really tactile. You can configure how hard the click should be. The feedback at the highest setting is simply lovely, and I’d actually much rather have these than buttons. What makes things even better is the consistency. Usually, when playing games that require rapid right-clicking, you need to press the button at the optimal area to minimize resistance. But with the Superstrike, you can tap anywhere, and both the feedback and actuation would remain the same.

Gaming on the Logitech Pro X2 Superstrike

A person gaming on the Logitech Pro X2 Superstrike

Let me get one thing straight: the Pro X2 Superstrike won’t make a bad gamer like me into an eSports player. It can, however, put a good player into eSports territory. I noticed that difference right away, when I first used the mouse, and thought, “Yup, this is it.” Logitech’s Hero sensors play beautifully with the HITS system. Sure, DPI can be set to an oblivion-like 44,000, but for the sake of my tiny 27-inch monitor, I kept it between 900 and 2,000. Tracking was more precise than any other mouse I’ve tested.

Let’s talk numbers. For testing, I picked up a generic ASUS mouse that used the same 2.5 GHz connection. The software of choice was AimLabs, a training ground for players to improve their reaction time by quickly hitting different objects on the screen. I first locked in with the regular mouse (three tries) and got an average reaction time of 243ms (not bad, right?). Then I switched to the Superstrike, with the clicks set to activate as soon as possible. In my best attempt, the reaction time was 218ms, which was noticeably better than my usual results.

Logitech Pro X2 Superstrike against a regular Asus mouse

But that’s not all the Superstrike has to offer. That’s because it introduces Rapid Triggers to a mouse for the very first time. For the uninitiated, Rapid Triggers are a keyboard technology that allows the keys to reset and re-actuate instantly after a slight lift of your finger.

I loved how it all comes together in games like CS2, where I went from averaging a few kills to at least landing some headshots. And that pretty much explains the Pro X2 Superstrike. It’s the best tool for gaming, and something you can rely on to help climb the eSports ladder.

For all my fellow Excel and Google Sheets users, while Superstrike isn’t really designed for productivity, I still used it as my daily driver for research. The results? I was doing spreadsheets a tad bit quicker thanks to the haptic clicks, which I configured to perfection. After a long day of work, I also noticed that my index finger didn’t hurt as much with a normal mouse.

Software & Customization

I talked about the customization part above, but to reiterate, the G Hub app handles it all. It’s available on both macOS and Windows and works pretty well. The app is neatly laid out with different sections. At the top is Sensitivity, which, as the name suggests, lets you adjust the DPI. If you’re new, Logitech has a bunch of presets baked in for different types of games. You can adjust the XY axis split, too. Beyond that, there are Assignments that let you assign different functions to the buttons and configure macros. The Scroll Wheel section has BHOP mode, designed to prevent activation from accidental bumps on the scroll wheel.

The real star is the HITS Configuration. Here, you adjust the Actuation point, or the point at which the haptic system registers a click. It can be set from a scale of 0-10, with zero requiring the least effort, and is better for gaming. Then there’s the Rapid Trigger adjustment, and lastly, Click Haptics. While a stronger haptic results in higher battery drain, I didn’t worry much as the Superstrike’s battery life is impressive. It lasted more than a week on a single charge, and I used it as my primary work mouse every day for 8 hours, too.

Verdict

Logitech Pro X2 Superstrike from the back

At $189.99 or ₹23,995 on Amazon in India, I agree that the Logitech Pro X2 Superstrike is a premium mouse. But unlike others, it’s something genuinely different. The haptic buttons are one-of-a-kind and work exceptionally well for both gaming and general productivity. In fast-paced games, the reduced actuation distance can actually make a noticeable difference to reaction times. The Logitech G Hub software is easy to use and offers plenty of customization, while the lightweight design makes it comfortable for long sessions. I’m sure we’ll see this tech being copied by others, but until then, if you’re shopping for a serious mouse, the Logitech Pro X2 Superstrike should be on your list.

#Logitech #Pro #Superstrike #Review #Gaming #Mouse #Clicks #Perfectlogitech">Logitech Pro X2 Superstrike Review: This Gaming Mouse Has No Clicks and It’s Perfect Gaming mice used to be at the forefront of exciting features, with brands working hard to gain a competitive edge. Sadly, that hasn’t happened in the last few years, as we’ve slowly gone down the numbers-game road, which isn’t scenic at all. These days, it’s only about which mouse has a DPI reaching high enough to operate a projector screen, or a weight so light it’s difficult to comprehend if you’re even holding something or not. Logitech, however, with its all-new Pro X2 Superstrike, has seen this trend and just said, “yeah, no.” So, what’s the Pro X2 Superstrike about? It’s a mouse, of course, that takes the clicks of a conventional one and throws them away. Instead, the Superstrike takes a page from the MacBook playbook by borrowing its haptic motors for the clicking mechanism. It’s something that’s never been done before, yet still makes a ton of sense for serious gamers. But are these latency benefits even worth it? To answer this very question, I used the Pro X2 Superstrike for over two weeks. Spoiler alert: it might be the best gaming mouse I’ve used. Here’s why. Logitech Pro X2 Superstrike ReviewHisan KidwaiSummaryThe Logitech Pro X2 Superstrike is something genuinely different. The haptic buttons are one-of-a-kind and work exceptionally well for both gaming and general productivity. In fast-paced games, the reduced actuation distance can actually make a noticeable difference to reaction times. The Logitech G Hub software is easy to use and offers plenty of customization, while the lightweight design makes it comfortable for long sessions. Design & No Clicks??? Despite the all-new mechanism, which we’ll talk about soon, Logitech hasn’t changed much about the Superstrike’s design. Instead, it bears a striking resemblance to the SuperLight 2, and that’s not a bad thing. I’m a fan of this new Stormtrooper-inspired color with the white shell and black buttons. The shape is fairly standard without all the ergonomic trickery. The finish is smooth, doesn’t attract any fingerprints, and is super easy to clean, if you like eating Doritos like me when gaming. Weight is kept at 61g, for which the company pulled a lot of strings, like using titanium screws and drilling holes in the PCB. While comfort is subjective, my pain-prone wrists did like the Superstrike during long gaming sessions. Let’s talk buttons and clicks. The two extra buttons on the left side are the standard kind, meaning they push down when you press them. The real magic happens on the left and right clicks. Logitech has developed a new system called HITS (Haptic Inductive Trigger System). It’s a bit of a mouthful for something that means the mouse combines tiny haptic motors with an electrical sensor to register a click. Remember the Hall Effect on the keyboard? It’s pretty much the same thing, except you can change when the click is registered. The benefits of this system are pretty obvious. In most mice, the click is activated after 0.6mm of travel. It’s not a lot, but still more than an eSports player in the heat of a battle would like. With the Superstrike, you can set it to activate after just 0.1mm of travel. That’s incredibly sensitive and means your movements will be registered faster than anyone else’s when coming out of a corner in Valorant or CS2. Logitech claims up to a 30ms reduction in latency. Speaking of those clicks, I do like them a lot. If you’ve used a MacBook trackpad, then these would be familiar. They are not quite as sharp but still really tactile. You can configure how hard the click should be. The feedback at the highest setting is simply lovely, and I’d actually much rather have these than buttons. What makes things even better is the consistency. Usually, when playing games that require rapid right-clicking, you need to press the button at the optimal area to minimize resistance. But with the Superstrike, you can tap anywhere, and both the feedback and actuation would remain the same. Gaming on the Logitech Pro X2 Superstrike Let me get one thing straight: the Pro X2 Superstrike won’t make a bad gamer like me into an eSports player. It can, however, put a good player into eSports territory. I noticed that difference right away, when I first used the mouse, and thought, “Yup, this is it.” Logitech’s Hero sensors play beautifully with the HITS system. Sure, DPI can be set to an oblivion-like 44,000, but for the sake of my tiny 27-inch monitor, I kept it between 900 and 2,000. Tracking was more precise than any other mouse I’ve tested. Let’s talk numbers. For testing, I picked up a generic ASUS mouse that used the same 2.5 GHz connection. The software of choice was AimLabs, a training ground for players to improve their reaction time by quickly hitting different objects on the screen. I first locked in with the regular mouse (three tries) and got an average reaction time of 243ms (not bad, right?). Then I switched to the Superstrike, with the clicks set to activate as soon as possible. In my best attempt, the reaction time was 218ms, which was noticeably better than my usual results. But that’s not all the Superstrike has to offer. That’s because it introduces Rapid Triggers to a mouse for the very first time. For the uninitiated, Rapid Triggers are a keyboard technology that allows the keys to reset and re-actuate instantly after a slight lift of your finger. I loved how it all comes together in games like CS2, where I went from averaging a few kills to at least landing some headshots. And that pretty much explains the Pro X2 Superstrike. It’s the best tool for gaming, and something you can rely on to help climb the eSports ladder. For all my fellow Excel and Google Sheets users, while Superstrike isn’t really designed for productivity, I still used it as my daily driver for research. The results? I was doing spreadsheets a tad bit quicker thanks to the haptic clicks, which I configured to perfection. After a long day of work, I also noticed that my index finger didn’t hurt as much with a normal mouse. Software & Customization I talked about the customization part above, but to reiterate, the G Hub app handles it all. It’s available on both macOS and Windows and works pretty well. The app is neatly laid out with different sections. At the top is Sensitivity, which, as the name suggests, lets you adjust the DPI. If you’re new, Logitech has a bunch of presets baked in for different types of games. You can adjust the XY axis split, too. Beyond that, there are Assignments that let you assign different functions to the buttons and configure macros. The Scroll Wheel section has BHOP mode, designed to prevent activation from accidental bumps on the scroll wheel. The real star is the HITS Configuration. Here, you adjust the Actuation point, or the point at which the haptic system registers a click. It can be set from a scale of 0-10, with zero requiring the least effort, and is better for gaming. Then there’s the Rapid Trigger adjustment, and lastly, Click Haptics. While a stronger haptic results in higher battery drain, I didn’t worry much as the Superstrike’s battery life is impressive. It lasted more than a week on a single charge, and I used it as my primary work mouse every day for 8 hours, too. Verdict At 9.99 or ₹23,995 on Amazon in India, I agree that the Logitech Pro X2 Superstrike is a premium mouse. But unlike others, it’s something genuinely different. The haptic buttons are one-of-a-kind and work exceptionally well for both gaming and general productivity. In fast-paced games, the reduced actuation distance can actually make a noticeable difference to reaction times. The Logitech G Hub software is easy to use and offers plenty of customization, while the lightweight design makes it comfortable for long sessions. I’m sure we’ll see this tech being copied by others, but until then, if you’re shopping for a serious mouse, the Logitech Pro X2 Superstrike should be on your list. #Logitech #Pro #Superstrike #Review #Gaming #Mouse #Clicks #Perfectlogitech

, has seen this trend and just said, “yeah, no.”

So, what’s the Pro X2 Superstrike about? It’s a mouse, of course, that takes the clicks of a conventional one and throws them away. Instead, the Superstrike takes a page from the MacBook playbook by borrowing its haptic motors for the clicking mechanism. It’s something that’s never been done before, yet still makes a ton of sense for serious gamers. But are these latency benefits even worth it? To answer this very question, I used the Pro X2 Superstrike for over two weeks. Spoiler alert: it might be the best gaming mouse I’ve used. Here’s why.

Logitech Pro X2 Superstrike Review

Hisan Kidwai

Summary

The Logitech Pro X2 Superstrike is something genuinely different. The haptic buttons are one-of-a-kind and work exceptionally well for both gaming and general productivity. In fast-paced games, the reduced actuation distance can actually make a noticeable difference to reaction times. The Logitech G Hub software is easy to use and offers plenty of customization, while the lightweight design makes it comfortable for long sessions.

Design & No Clicks???

Logitech Pro X2 Superstrike Review: This Gaming Mouse Has No Clicks and It’s Perfect Gaming mice used to be at the forefront of exciting features, with brands working hard to gain a competitive edge. Sadly, that hasn’t happened in the last few years, as we’ve slowly gone down the numbers-game road, which isn’t scenic at all. These days, it’s only about which mouse has a DPI reaching high enough to operate a projector screen, or a weight so light it’s difficult to comprehend if you’re even holding something or not. Logitech, however, with its all-new Pro X2 Superstrike, has seen this trend and just said, “yeah, no.” So, what’s the Pro X2 Superstrike about? It’s a mouse, of course, that takes the clicks of a conventional one and throws them away. Instead, the Superstrike takes a page from the MacBook playbook by borrowing its haptic motors for the clicking mechanism. It’s something that’s never been done before, yet still makes a ton of sense for serious gamers. But are these latency benefits even worth it? To answer this very question, I used the Pro X2 Superstrike for over two weeks. Spoiler alert: it might be the best gaming mouse I’ve used. Here’s why. Logitech Pro X2 Superstrike ReviewHisan KidwaiSummaryThe Logitech Pro X2 Superstrike is something genuinely different. The haptic buttons are one-of-a-kind and work exceptionally well for both gaming and general productivity. In fast-paced games, the reduced actuation distance can actually make a noticeable difference to reaction times. The Logitech G Hub software is easy to use and offers plenty of customization, while the lightweight design makes it comfortable for long sessions. Design & No Clicks??? Despite the all-new mechanism, which we’ll talk about soon, Logitech hasn’t changed much about the Superstrike’s design. Instead, it bears a striking resemblance to the SuperLight 2, and that’s not a bad thing. I’m a fan of this new Stormtrooper-inspired color with the white shell and black buttons. The shape is fairly standard without all the ergonomic trickery. The finish is smooth, doesn’t attract any fingerprints, and is super easy to clean, if you like eating Doritos like me when gaming. Weight is kept at 61g, for which the company pulled a lot of strings, like using titanium screws and drilling holes in the PCB. While comfort is subjective, my pain-prone wrists did like the Superstrike during long gaming sessions. Let’s talk buttons and clicks. The two extra buttons on the left side are the standard kind, meaning they push down when you press them. The real magic happens on the left and right clicks. Logitech has developed a new system called HITS (Haptic Inductive Trigger System). It’s a bit of a mouthful for something that means the mouse combines tiny haptic motors with an electrical sensor to register a click. Remember the Hall Effect on the keyboard? It’s pretty much the same thing, except you can change when the click is registered. The benefits of this system are pretty obvious. In most mice, the click is activated after 0.6mm of travel. It’s not a lot, but still more than an eSports player in the heat of a battle would like. With the Superstrike, you can set it to activate after just 0.1mm of travel. That’s incredibly sensitive and means your movements will be registered faster than anyone else’s when coming out of a corner in Valorant or CS2. Logitech claims up to a 30ms reduction in latency. Speaking of those clicks, I do like them a lot. If you’ve used a MacBook trackpad, then these would be familiar. They are not quite as sharp but still really tactile. You can configure how hard the click should be. The feedback at the highest setting is simply lovely, and I’d actually much rather have these than buttons. What makes things even better is the consistency. Usually, when playing games that require rapid right-clicking, you need to press the button at the optimal area to minimize resistance. But with the Superstrike, you can tap anywhere, and both the feedback and actuation would remain the same. Gaming on the Logitech Pro X2 Superstrike Let me get one thing straight: the Pro X2 Superstrike won’t make a bad gamer like me into an eSports player. It can, however, put a good player into eSports territory. I noticed that difference right away, when I first used the mouse, and thought, “Yup, this is it.” Logitech’s Hero sensors play beautifully with the HITS system. Sure, DPI can be set to an oblivion-like 44,000, but for the sake of my tiny 27-inch monitor, I kept it between 900 and 2,000. Tracking was more precise than any other mouse I’ve tested. Let’s talk numbers. For testing, I picked up a generic ASUS mouse that used the same 2.5 GHz connection. The software of choice was AimLabs, a training ground for players to improve their reaction time by quickly hitting different objects on the screen. I first locked in with the regular mouse (three tries) and got an average reaction time of 243ms (not bad, right?). Then I switched to the Superstrike, with the clicks set to activate as soon as possible. In my best attempt, the reaction time was 218ms, which was noticeably better than my usual results. But that’s not all the Superstrike has to offer. That’s because it introduces Rapid Triggers to a mouse for the very first time. For the uninitiated, Rapid Triggers are a keyboard technology that allows the keys to reset and re-actuate instantly after a slight lift of your finger. I loved how it all comes together in games like CS2, where I went from averaging a few kills to at least landing some headshots. And that pretty much explains the Pro X2 Superstrike. It’s the best tool for gaming, and something you can rely on to help climb the eSports ladder. For all my fellow Excel and Google Sheets users, while Superstrike isn’t really designed for productivity, I still used it as my daily driver for research. The results? I was doing spreadsheets a tad bit quicker thanks to the haptic clicks, which I configured to perfection. After a long day of work, I also noticed that my index finger didn’t hurt as much with a normal mouse. Software & Customization I talked about the customization part above, but to reiterate, the G Hub app handles it all. It’s available on both macOS and Windows and works pretty well. The app is neatly laid out with different sections. At the top is Sensitivity, which, as the name suggests, lets you adjust the DPI. If you’re new, Logitech has a bunch of presets baked in for different types of games. You can adjust the XY axis split, too. Beyond that, there are Assignments that let you assign different functions to the buttons and configure macros. The Scroll Wheel section has BHOP mode, designed to prevent activation from accidental bumps on the scroll wheel. The real star is the HITS Configuration. Here, you adjust the Actuation point, or the point at which the haptic system registers a click. It can be set from a scale of 0-10, with zero requiring the least effort, and is better for gaming. Then there’s the Rapid Trigger adjustment, and lastly, Click Haptics. While a stronger haptic results in higher battery drain, I didn’t worry much as the Superstrike’s battery life is impressive. It lasted more than a week on a single charge, and I used it as my primary work mouse every day for 8 hours, too. Verdict At 9.99 or ₹23,995 on Amazon in India, I agree that the Logitech Pro X2 Superstrike is a premium mouse. But unlike others, it’s something genuinely different. The haptic buttons are one-of-a-kind and work exceptionally well for both gaming and general productivity. In fast-paced games, the reduced actuation distance can actually make a noticeable difference to reaction times. The Logitech G Hub software is easy to use and offers plenty of customization, while the lightweight design makes it comfortable for long sessions. I’m sure we’ll see this tech being copied by others, but until then, if you’re shopping for a serious mouse, the Logitech Pro X2 Superstrike should be on your list. #Logitech #Pro #Superstrike #Review #Gaming #Mouse #Clicks #Perfectlogitech

Despite the all-new mechanism, which we’ll talk about soon, Logitech hasn’t changed much about the Superstrike’s design. Instead, it bears a striking resemblance to the SuperLight 2, and that’s not a bad thing. I’m a fan of this new Stormtrooper-inspired color with the white shell and black buttons. The shape is fairly standard without all the ergonomic trickery. The finish is smooth, doesn’t attract any fingerprints, and is super easy to clean, if you like eating Doritos like me when gaming. Weight is kept at 61g, for which the company pulled a lot of strings, like using titanium screws and drilling holes in the PCB. While comfort is subjective, my pain-prone wrists did like the Superstrike during long gaming sessions.

Let’s talk buttons and clicks. The two extra buttons on the left side are the standard kind, meaning they push down when you press them. The real magic happens on the left and right clicks. Logitech has developed a new system called HITS (Haptic Inductive Trigger System). It’s a bit of a mouthful for something that means the mouse combines tiny haptic motors with an electrical sensor to register a click. Remember the Hall Effect on the keyboard? It’s pretty much the same thing, except you can change when the click is registered.

Closeup of the HITS clicks

The benefits of this system are pretty obvious. In most mice, the click is activated after 0.6mm of travel. It’s not a lot, but still more than an eSports player in the heat of a battle would like. With the Superstrike, you can set it to activate after just 0.1mm of travel. That’s incredibly sensitive and means your movements will be registered faster than anyone else’s when coming out of a corner in Valorant or CS2. Logitech claims up to a 30ms reduction in latency.

Speaking of those clicks, I do like them a lot. If you’ve used a MacBook trackpad, then these would be familiar. They are not quite as sharp but still really tactile. You can configure how hard the click should be. The feedback at the highest setting is simply lovely, and I’d actually much rather have these than buttons. What makes things even better is the consistency. Usually, when playing games that require rapid right-clicking, you need to press the button at the optimal area to minimize resistance. But with the Superstrike, you can tap anywhere, and both the feedback and actuation would remain the same.

Gaming on the Logitech Pro X2 Superstrike

A person gaming on the Logitech Pro X2 Superstrike

Let me get one thing straight: the Pro X2 Superstrike won’t make a bad gamer like me into an eSports player. It can, however, put a good player into eSports territory. I noticed that difference right away, when I first used the mouse, and thought, “Yup, this is it.” Logitech’s Hero sensors play beautifully with the HITS system. Sure, DPI can be set to an oblivion-like 44,000, but for the sake of my tiny 27-inch monitor, I kept it between 900 and 2,000. Tracking was more precise than any other mouse I’ve tested.

Let’s talk numbers. For testing, I picked up a generic ASUS mouse that used the same 2.5 GHz connection. The software of choice was AimLabs, a training ground for players to improve their reaction time by quickly hitting different objects on the screen. I first locked in with the regular mouse (three tries) and got an average reaction time of 243ms (not bad, right?). Then I switched to the Superstrike, with the clicks set to activate as soon as possible. In my best attempt, the reaction time was 218ms, which was noticeably better than my usual results.

Logitech Pro X2 Superstrike against a regular Asus mouse

But that’s not all the Superstrike has to offer. That’s because it introduces Rapid Triggers to a mouse for the very first time. For the uninitiated, Rapid Triggers are a keyboard technology that allows the keys to reset and re-actuate instantly after a slight lift of your finger.

I loved how it all comes together in games like CS2, where I went from averaging a few kills to at least landing some headshots. And that pretty much explains the Pro X2 Superstrike. It’s the best tool for gaming, and something you can rely on to help climb the eSports ladder.

For all my fellow Excel and Google Sheets users, while Superstrike isn’t really designed for productivity, I still used it as my daily driver for research. The results? I was doing spreadsheets a tad bit quicker thanks to the haptic clicks, which I configured to perfection. After a long day of work, I also noticed that my index finger didn’t hurt as much with a normal mouse.

Software & Customization

I talked about the customization part above, but to reiterate, the G Hub app handles it all. It’s available on both macOS and Windows and works pretty well. The app is neatly laid out with different sections. At the top is Sensitivity, which, as the name suggests, lets you adjust the DPI. If you’re new, Logitech has a bunch of presets baked in for different types of games. You can adjust the XY axis split, too. Beyond that, there are Assignments that let you assign different functions to the buttons and configure macros. The Scroll Wheel section has BHOP mode, designed to prevent activation from accidental bumps on the scroll wheel.

The real star is the HITS Configuration. Here, you adjust the Actuation point, or the point at which the haptic system registers a click. It can be set from a scale of 0-10, with zero requiring the least effort, and is better for gaming. Then there’s the Rapid Trigger adjustment, and lastly, Click Haptics. While a stronger haptic results in higher battery drain, I didn’t worry much as the Superstrike’s battery life is impressive. It lasted more than a week on a single charge, and I used it as my primary work mouse every day for 8 hours, too.

Verdict

Logitech Pro X2 Superstrike from the back

At $189.99 or ₹23,995 on Amazon in India, I agree that the Logitech Pro X2 Superstrike is a premium mouse. But unlike others, it’s something genuinely different. The haptic buttons are one-of-a-kind and work exceptionally well for both gaming and general productivity. In fast-paced games, the reduced actuation distance can actually make a noticeable difference to reaction times. The Logitech G Hub software is easy to use and offers plenty of customization, while the lightweight design makes it comfortable for long sessions. I’m sure we’ll see this tech being copied by others, but until then, if you’re shopping for a serious mouse, the Logitech Pro X2 Superstrike should be on your list.

#Logitech #Pro #Superstrike #Review #Gaming #Mouse #Clicks #Perfectlogitech">Logitech Pro X2 Superstrike Review: This Gaming Mouse Has No Clicks and It’s Perfect

Gaming mice used to be at the forefront of exciting features, with brands working hard to gain a competitive edge. Sadly, that hasn’t happened in the last few years, as we’ve slowly gone down the numbers-game road, which isn’t scenic at all. These days, it’s only about which mouse has a DPI reaching high enough to operate a projector screen, or a weight so light it’s difficult to comprehend if you’re even holding something or not. Logitech, however, with its all-new Pro X2 Superstrike, has seen this trend and just said, “yeah, no.”

So, what’s the Pro X2 Superstrike about? It’s a mouse, of course, that takes the clicks of a conventional one and throws them away. Instead, the Superstrike takes a page from the MacBook playbook by borrowing its haptic motors for the clicking mechanism. It’s something that’s never been done before, yet still makes a ton of sense for serious gamers. But are these latency benefits even worth it? To answer this very question, I used the Pro X2 Superstrike for over two weeks. Spoiler alert: it might be the best gaming mouse I’ve used. Here’s why.

Logitech Pro X2 Superstrike Review

Hisan Kidwai

Summary

The Logitech Pro X2 Superstrike is something genuinely different. The haptic buttons are one-of-a-kind and work exceptionally well for both gaming and general productivity. In fast-paced games, the reduced actuation distance can actually make a noticeable difference to reaction times. The Logitech G Hub software is easy to use and offers plenty of customization, while the lightweight design makes it comfortable for long sessions.

Design & No Clicks???

Logitech Pro X2 Superstrike Review: This Gaming Mouse Has No Clicks and It’s Perfect Gaming mice used to be at the forefront of exciting features, with brands working hard to gain a competitive edge. Sadly, that hasn’t happened in the last few years, as we’ve slowly gone down the numbers-game road, which isn’t scenic at all. These days, it’s only about which mouse has a DPI reaching high enough to operate a projector screen, or a weight so light it’s difficult to comprehend if you’re even holding something or not. Logitech, however, with its all-new Pro X2 Superstrike, has seen this trend and just said, “yeah, no.” So, what’s the Pro X2 Superstrike about? It’s a mouse, of course, that takes the clicks of a conventional one and throws them away. Instead, the Superstrike takes a page from the MacBook playbook by borrowing its haptic motors for the clicking mechanism. It’s something that’s never been done before, yet still makes a ton of sense for serious gamers. But are these latency benefits even worth it? To answer this very question, I used the Pro X2 Superstrike for over two weeks. Spoiler alert: it might be the best gaming mouse I’ve used. Here’s why. Logitech Pro X2 Superstrike ReviewHisan KidwaiSummaryThe Logitech Pro X2 Superstrike is something genuinely different. The haptic buttons are one-of-a-kind and work exceptionally well for both gaming and general productivity. In fast-paced games, the reduced actuation distance can actually make a noticeable difference to reaction times. The Logitech G Hub software is easy to use and offers plenty of customization, while the lightweight design makes it comfortable for long sessions. Design & No Clicks??? Despite the all-new mechanism, which we’ll talk about soon, Logitech hasn’t changed much about the Superstrike’s design. Instead, it bears a striking resemblance to the SuperLight 2, and that’s not a bad thing. I’m a fan of this new Stormtrooper-inspired color with the white shell and black buttons. The shape is fairly standard without all the ergonomic trickery. The finish is smooth, doesn’t attract any fingerprints, and is super easy to clean, if you like eating Doritos like me when gaming. Weight is kept at 61g, for which the company pulled a lot of strings, like using titanium screws and drilling holes in the PCB. While comfort is subjective, my pain-prone wrists did like the Superstrike during long gaming sessions. Let’s talk buttons and clicks. The two extra buttons on the left side are the standard kind, meaning they push down when you press them. The real magic happens on the left and right clicks. Logitech has developed a new system called HITS (Haptic Inductive Trigger System). It’s a bit of a mouthful for something that means the mouse combines tiny haptic motors with an electrical sensor to register a click. Remember the Hall Effect on the keyboard? It’s pretty much the same thing, except you can change when the click is registered. The benefits of this system are pretty obvious. In most mice, the click is activated after 0.6mm of travel. It’s not a lot, but still more than an eSports player in the heat of a battle would like. With the Superstrike, you can set it to activate after just 0.1mm of travel. That’s incredibly sensitive and means your movements will be registered faster than anyone else’s when coming out of a corner in Valorant or CS2. Logitech claims up to a 30ms reduction in latency. Speaking of those clicks, I do like them a lot. If you’ve used a MacBook trackpad, then these would be familiar. They are not quite as sharp but still really tactile. You can configure how hard the click should be. The feedback at the highest setting is simply lovely, and I’d actually much rather have these than buttons. What makes things even better is the consistency. Usually, when playing games that require rapid right-clicking, you need to press the button at the optimal area to minimize resistance. But with the Superstrike, you can tap anywhere, and both the feedback and actuation would remain the same. Gaming on the Logitech Pro X2 Superstrike Let me get one thing straight: the Pro X2 Superstrike won’t make a bad gamer like me into an eSports player. It can, however, put a good player into eSports territory. I noticed that difference right away, when I first used the mouse, and thought, “Yup, this is it.” Logitech’s Hero sensors play beautifully with the HITS system. Sure, DPI can be set to an oblivion-like 44,000, but for the sake of my tiny 27-inch monitor, I kept it between 900 and 2,000. Tracking was more precise than any other mouse I’ve tested. Let’s talk numbers. For testing, I picked up a generic ASUS mouse that used the same 2.5 GHz connection. The software of choice was AimLabs, a training ground for players to improve their reaction time by quickly hitting different objects on the screen. I first locked in with the regular mouse (three tries) and got an average reaction time of 243ms (not bad, right?). Then I switched to the Superstrike, with the clicks set to activate as soon as possible. In my best attempt, the reaction time was 218ms, which was noticeably better than my usual results. But that’s not all the Superstrike has to offer. That’s because it introduces Rapid Triggers to a mouse for the very first time. For the uninitiated, Rapid Triggers are a keyboard technology that allows the keys to reset and re-actuate instantly after a slight lift of your finger. I loved how it all comes together in games like CS2, where I went from averaging a few kills to at least landing some headshots. And that pretty much explains the Pro X2 Superstrike. It’s the best tool for gaming, and something you can rely on to help climb the eSports ladder. For all my fellow Excel and Google Sheets users, while Superstrike isn’t really designed for productivity, I still used it as my daily driver for research. The results? I was doing spreadsheets a tad bit quicker thanks to the haptic clicks, which I configured to perfection. After a long day of work, I also noticed that my index finger didn’t hurt as much with a normal mouse. Software & Customization I talked about the customization part above, but to reiterate, the G Hub app handles it all. It’s available on both macOS and Windows and works pretty well. The app is neatly laid out with different sections. At the top is Sensitivity, which, as the name suggests, lets you adjust the DPI. If you’re new, Logitech has a bunch of presets baked in for different types of games. You can adjust the XY axis split, too. Beyond that, there are Assignments that let you assign different functions to the buttons and configure macros. The Scroll Wheel section has BHOP mode, designed to prevent activation from accidental bumps on the scroll wheel. The real star is the HITS Configuration. Here, you adjust the Actuation point, or the point at which the haptic system registers a click. It can be set from a scale of 0-10, with zero requiring the least effort, and is better for gaming. Then there’s the Rapid Trigger adjustment, and lastly, Click Haptics. While a stronger haptic results in higher battery drain, I didn’t worry much as the Superstrike’s battery life is impressive. It lasted more than a week on a single charge, and I used it as my primary work mouse every day for 8 hours, too. Verdict At 9.99 or ₹23,995 on Amazon in India, I agree that the Logitech Pro X2 Superstrike is a premium mouse. But unlike others, it’s something genuinely different. The haptic buttons are one-of-a-kind and work exceptionally well for both gaming and general productivity. In fast-paced games, the reduced actuation distance can actually make a noticeable difference to reaction times. The Logitech G Hub software is easy to use and offers plenty of customization, while the lightweight design makes it comfortable for long sessions. I’m sure we’ll see this tech being copied by others, but until then, if you’re shopping for a serious mouse, the Logitech Pro X2 Superstrike should be on your list. #Logitech #Pro #Superstrike #Review #Gaming #Mouse #Clicks #Perfectlogitech

Despite the all-new mechanism, which we’ll talk about soon, Logitech hasn’t changed much about the Superstrike’s design. Instead, it bears a striking resemblance to the SuperLight 2, and that’s not a bad thing. I’m a fan of this new Stormtrooper-inspired color with the white shell and black buttons. The shape is fairly standard without all the ergonomic trickery. The finish is smooth, doesn’t attract any fingerprints, and is super easy to clean, if you like eating Doritos like me when gaming. Weight is kept at 61g, for which the company pulled a lot of strings, like using titanium screws and drilling holes in the PCB. While comfort is subjective, my pain-prone wrists did like the Superstrike during long gaming sessions.

Let’s talk buttons and clicks. The two extra buttons on the left side are the standard kind, meaning they push down when you press them. The real magic happens on the left and right clicks. Logitech has developed a new system called HITS (Haptic Inductive Trigger System). It’s a bit of a mouthful for something that means the mouse combines tiny haptic motors with an electrical sensor to register a click. Remember the Hall Effect on the keyboard? It’s pretty much the same thing, except you can change when the click is registered.

Closeup of the HITS clicks

The benefits of this system are pretty obvious. In most mice, the click is activated after 0.6mm of travel. It’s not a lot, but still more than an eSports player in the heat of a battle would like. With the Superstrike, you can set it to activate after just 0.1mm of travel. That’s incredibly sensitive and means your movements will be registered faster than anyone else’s when coming out of a corner in Valorant or CS2. Logitech claims up to a 30ms reduction in latency.

Speaking of those clicks, I do like them a lot. If you’ve used a MacBook trackpad, then these would be familiar. They are not quite as sharp but still really tactile. You can configure how hard the click should be. The feedback at the highest setting is simply lovely, and I’d actually much rather have these than buttons. What makes things even better is the consistency. Usually, when playing games that require rapid right-clicking, you need to press the button at the optimal area to minimize resistance. But with the Superstrike, you can tap anywhere, and both the feedback and actuation would remain the same.

Gaming on the Logitech Pro X2 Superstrike

A person gaming on the Logitech Pro X2 Superstrike

Let me get one thing straight: the Pro X2 Superstrike won’t make a bad gamer like me into an eSports player. It can, however, put a good player into eSports territory. I noticed that difference right away, when I first used the mouse, and thought, “Yup, this is it.” Logitech’s Hero sensors play beautifully with the HITS system. Sure, DPI can be set to an oblivion-like 44,000, but for the sake of my tiny 27-inch monitor, I kept it between 900 and 2,000. Tracking was more precise than any other mouse I’ve tested.

Let’s talk numbers. For testing, I picked up a generic ASUS mouse that used the same 2.5 GHz connection. The software of choice was AimLabs, a training ground for players to improve their reaction time by quickly hitting different objects on the screen. I first locked in with the regular mouse (three tries) and got an average reaction time of 243ms (not bad, right?). Then I switched to the Superstrike, with the clicks set to activate as soon as possible. In my best attempt, the reaction time was 218ms, which was noticeably better than my usual results.

Logitech Pro X2 Superstrike against a regular Asus mouse

But that’s not all the Superstrike has to offer. That’s because it introduces Rapid Triggers to a mouse for the very first time. For the uninitiated, Rapid Triggers are a keyboard technology that allows the keys to reset and re-actuate instantly after a slight lift of your finger.

I loved how it all comes together in games like CS2, where I went from averaging a few kills to at least landing some headshots. And that pretty much explains the Pro X2 Superstrike. It’s the best tool for gaming, and something you can rely on to help climb the eSports ladder.

For all my fellow Excel and Google Sheets users, while Superstrike isn’t really designed for productivity, I still used it as my daily driver for research. The results? I was doing spreadsheets a tad bit quicker thanks to the haptic clicks, which I configured to perfection. After a long day of work, I also noticed that my index finger didn’t hurt as much with a normal mouse.

Software & Customization

I talked about the customization part above, but to reiterate, the G Hub app handles it all. It’s available on both macOS and Windows and works pretty well. The app is neatly laid out with different sections. At the top is Sensitivity, which, as the name suggests, lets you adjust the DPI. If you’re new, Logitech has a bunch of presets baked in for different types of games. You can adjust the XY axis split, too. Beyond that, there are Assignments that let you assign different functions to the buttons and configure macros. The Scroll Wheel section has BHOP mode, designed to prevent activation from accidental bumps on the scroll wheel.

The real star is the HITS Configuration. Here, you adjust the Actuation point, or the point at which the haptic system registers a click. It can be set from a scale of 0-10, with zero requiring the least effort, and is better for gaming. Then there’s the Rapid Trigger adjustment, and lastly, Click Haptics. While a stronger haptic results in higher battery drain, I didn’t worry much as the Superstrike’s battery life is impressive. It lasted more than a week on a single charge, and I used it as my primary work mouse every day for 8 hours, too.

Verdict

Logitech Pro X2 Superstrike from the back

At $189.99 or ₹23,995 on Amazon in India, I agree that the Logitech Pro X2 Superstrike is a premium mouse. But unlike others, it’s something genuinely different. The haptic buttons are one-of-a-kind and work exceptionally well for both gaming and general productivity. In fast-paced games, the reduced actuation distance can actually make a noticeable difference to reaction times. The Logitech G Hub software is easy to use and offers plenty of customization, while the lightweight design makes it comfortable for long sessions. I’m sure we’ll see this tech being copied by others, but until then, if you’re shopping for a serious mouse, the Logitech Pro X2 Superstrike should be on your list.

#Logitech #Pro #Superstrike #Review #Gaming #Mouse #Clicks #Perfectlogitech

With all the excitement of movies to come this week thanks to CinemaCon, it was almost easy to forget that MGM provided an interesting update on one of our favorite movies of the year that’s already out: Project Hail Mary will head back to IMAX theaters this weekend for an extended theatrical run. But that extension also means one thing: you’ll have to wait to stream it at home for a good while longer.

During its presentation at CinemaCon this week MGM confirmed that Phil Lord and Chris Miller’s sci-fi hit would make its return to IMAX screens for a limited-time, one-week run starting this weekend, a move that will likely inch Project Hail Mary ever closer to crossing the $600 million box office mark. But to put a finer point on the news, Miller took to Twitter yesterday to confirm specifically that the extension means you won’t be able to watch the film at home for the forseeable future.

“It won’t be on streaming any time soon,” Miller’s tweet reads in part. “This is a movie that needs to be seen on a big screen […] Bring friends and loved ones. It’s an experience to share with others.”

Project Hail Mary launched on March 20, so it’s not too surprising that it’s not headed home just yet—it’s just shy of a month into its theatrical window, which has now been extended by at least another week with the return to IMAX. But as studios begin to try realigning towards more theatrical releases with longer exclusivity windows again (one of the lingering aftereffects of covid’s impact on movie theaters), we should probably expect some of the biggest films of the year and beyond to try and hold off of hitting streaming for as long as they can.

At least in Project Hail Mary‘s case, you can still go and see it somewhere, even if it’s not at home. Good things come to those who wait, but for now, you can head to a movie theater to get your fix again.

Want more io9 news? Check out when to expect the latest Marvel, Star Wars, and Star Trek releases, what’s next for the DC Universe on film and TV, and everything you need to know about the future of Doctor Who.

#Project #Hail #Mary #Wont #Coming #Streaming #TimeAmazon MGM,Project Hail Mary,Streaming">‘Project Hail Mary’ Won’t Be Coming to Streaming Any Time Soon With all the excitement of movies to come this week thanks to CinemaCon, it was almost easy to forget that MGM provided an interesting update on one of our favorite movies of the year that’s already out: Project Hail Mary will head back to IMAX theaters this weekend for an extended theatrical run. But that extension also means one thing: you’ll have to wait to stream it at home for a good while longer. During its presentation at CinemaCon this week MGM confirmed that Phil Lord and Chris Miller’s sci-fi hit would make its return to IMAX screens for a limited-time, one-week run starting this weekend, a move that will likely inch Project Hail Mary ever closer to crossing the 0 million box office mark. But to put a finer point on the news, Miller took to Twitter yesterday to confirm specifically that the extension means you won’t be able to watch the film at home for the forseeable future. We announced yesterday that MGM is extending the exclusive theatrical window for PROJECT HAIL MARY so it won’t be on streaming anytime soon. This is a movie that needs to be seen on a big screen – and w a full return to IMAX screens for 1 week only starting this weekend, make… https://t.co/suK8NYpgWM — Christopher Miller (@chrizmillr) April 16, 2026 “It won’t be on streaming any time soon,” Miller’s tweet reads in part. “This is a movie that needs to be seen on a big screen […] Bring friends and loved ones. It’s an experience to share with others.” Project Hail Mary launched on March 20, so it’s not too surprising that it’s not headed home just yet—it’s just shy of a month into its theatrical window, which has now been extended by at least another week with the return to IMAX. But as studios begin to try realigning towards more theatrical releases with longer exclusivity windows again (one of the lingering aftereffects of covid’s impact on movie theaters), we should probably expect some of the biggest films of the year and beyond to try and hold off of hitting streaming for as long as they can. At least in Project Hail Mary‘s case, you can still go and see it somewhere, even if it’s not at home. Good things come to those who wait, but for now, you can head to a movie theater to get your fix again. Want more io9 news? Check out when to expect the latest Marvel, Star Wars, and Star Trek releases, what’s next for the DC Universe on film and TV, and everything you need to know about the future of Doctor Who. #Project #Hail #Mary #Wont #Coming #Streaming #TimeAmazon MGM,Project Hail Mary,Streaming

thanks to CinemaCon, it was almost easy to forget that MGM provided an interesting update on one of our favorite movies of the year that’s already out: Project Hail Mary will head back to IMAX theaters this weekend for an extended theatrical run. But that extension also means one thing: you’ll have to wait to stream it at home for a good while longer.

During its presentation at CinemaCon this week MGM confirmed that Phil Lord and Chris Miller’s sci-fi hit would make its return to IMAX screens for a limited-time, one-week run starting this weekend, a move that will likely inch Project Hail Mary ever closer to crossing the $600 million box office mark. But to put a finer point on the news, Miller took to Twitter yesterday to confirm specifically that the extension means you won’t be able to watch the film at home for the forseeable future.

“It won’t be on streaming any time soon,” Miller’s tweet reads in part. “This is a movie that needs to be seen on a big screen […] Bring friends and loved ones. It’s an experience to share with others.”

Project Hail Mary launched on March 20, so it’s not too surprising that it’s not headed home just yet—it’s just shy of a month into its theatrical window, which has now been extended by at least another week with the return to IMAX. But as studios begin to try realigning towards more theatrical releases with longer exclusivity windows again (one of the lingering aftereffects of covid’s impact on movie theaters), we should probably expect some of the biggest films of the year and beyond to try and hold off of hitting streaming for as long as they can.

At least in Project Hail Mary‘s case, you can still go and see it somewhere, even if it’s not at home. Good things come to those who wait, but for now, you can head to a movie theater to get your fix again.

Want more io9 news? Check out when to expect the latest Marvel, Star Wars, and Star Trek releases, what’s next for the DC Universe on film and TV, and everything you need to know about the future of Doctor Who.

#Project #Hail #Mary #Wont #Coming #Streaming #TimeAmazon MGM,Project Hail Mary,Streaming">‘Project Hail Mary’ Won’t Be Coming to Streaming Any Time Soon‘Project Hail Mary’ Won’t Be Coming to Streaming Any Time Soon With all the excitement of movies to come this week thanks to CinemaCon, it was almost easy to forget that MGM provided an interesting update on one of our favorite movies of the year that’s already out: Project Hail Mary will head back to IMAX theaters this weekend for an extended theatrical run. But that extension also means one thing: you’ll have to wait to stream it at home for a good while longer. During its presentation at CinemaCon this week MGM confirmed that Phil Lord and Chris Miller’s sci-fi hit would make its return to IMAX screens for a limited-time, one-week run starting this weekend, a move that will likely inch Project Hail Mary ever closer to crossing the $600 million box office mark. But to put a finer point on the news, Miller took to Twitter yesterday to confirm specifically that the extension means you won’t be able to watch the film at home for the forseeable future. We announced yesterday that MGM is extending the exclusive theatrical window for PROJECT HAIL MARY so it won’t be on streaming anytime soon. This is a movie that needs to be seen on a big screen – and w a full return to IMAX screens for 1 week only starting this weekend, make… https://t.co/suK8NYpgWM — Christopher Miller (@chrizmillr) April 16, 2026 “It won’t be on streaming any time soon,” Miller’s tweet reads in part. “This is a movie that needs to be seen on a big screen […] Bring friends and loved ones. It’s an experience to share with others.” Project Hail Mary launched on March 20, so it’s not too surprising that it’s not headed home just yet—it’s just shy of a month into its theatrical window, which has now been extended by at least another week with the return to IMAX. But as studios begin to try realigning towards more theatrical releases with longer exclusivity windows again (one of the lingering aftereffects of covid’s impact on movie theaters), we should probably expect some of the biggest films of the year and beyond to try and hold off of hitting streaming for as long as they can. At least in Project Hail Mary‘s case, you can still go and see it somewhere, even if it’s not at home. Good things come to those who wait, but for now, you can head to a movie theater to get your fix again. Want more io9 news? Check out when to expect the latest Marvel, Star Wars, and Star Trek releases, what’s next for the DC Universe on film and TV, and everything you need to know about the future of Doctor Who. #Project #Hail #Mary #Wont #Coming #Streaming #TimeAmazon MGM,Project Hail Mary,Streaming

With all the excitement of movies to come this week thanks to CinemaCon, it was almost easy to forget that MGM provided an interesting update on one of our favorite movies of the year that’s already out: Project Hail Mary will head back to IMAX theaters this weekend for an extended theatrical run. But that extension also means one thing: you’ll have to wait to stream it at home for a good while longer.

During its presentation at CinemaCon this week MGM confirmed that Phil Lord and Chris Miller’s sci-fi hit would make its return to IMAX screens for a limited-time, one-week run starting this weekend, a move that will likely inch Project Hail Mary ever closer to crossing the $600 million box office mark. But to put a finer point on the news, Miller took to Twitter yesterday to confirm specifically that the extension means you won’t be able to watch the film at home for the forseeable future.

“It won’t be on streaming any time soon,” Miller’s tweet reads in part. “This is a movie that needs to be seen on a big screen […] Bring friends and loved ones. It’s an experience to share with others.”

Project Hail Mary launched on March 20, so it’s not too surprising that it’s not headed home just yet—it’s just shy of a month into its theatrical window, which has now been extended by at least another week with the return to IMAX. But as studios begin to try realigning towards more theatrical releases with longer exclusivity windows again (one of the lingering aftereffects of covid’s impact on movie theaters), we should probably expect some of the biggest films of the year and beyond to try and hold off of hitting streaming for as long as they can.

At least in Project Hail Mary‘s case, you can still go and see it somewhere, even if it’s not at home. Good things come to those who wait, but for now, you can head to a movie theater to get your fix again.

Want more io9 news? Check out when to expect the latest Marvel, Star Wars, and Star Trek releases, what’s next for the DC Universe on film and TV, and everything you need to know about the future of Doctor Who.

#Project #Hail #Mary #Wont #Coming #Streaming #TimeAmazon MGM,Project Hail Mary,Streaming

Post Comment