×
Switch to an Ergonomic Mouse and Give Your Wrists a Break

Switch to an Ergonomic Mouse and Give Your Wrists a Break

Other Ergonomic Mice to Consider

There are several more options on the market to consider. These didn’t cut it as our top picks for one reason or another, but we still like them enough to recommend.

Razer Pro Click V2

Photograph: Henri Robbins

Razer Pro Click V2 for $120: The biggest draw of the Pro Click V2 (7/10, WIRED Recommends) is the shape: It’s sleek, refined, and comfortable. Instead of the sharp edges and angles of the Razer Basilisk, the Pro Click V2 has the curves of a normal mouse and is just as comfortable in an office setting as it would be in a gaming setup. And that’s what makes the Click stand out—you can use it everywhere, for everything. The shape is comfortable for regular use, the design is innocuous yet still satisfying, and the mouse has most of the usual trappings of a productivity mouse: An ergonomic shape, dual-mode mouse wheel, multidevice Bluetooth connectivity, and a slot on the underside to store the dongle. At the same time, it has the specs of a gaming mouse: 1,000-Hz polling, 2.4-GHz connectivity, full programmability, rubberized grips on either side, and bright RGB lighting on the underside. The Pro Click v2 also has horizontal scrolling through the mouse wheel, where it can be tilted to either side to scroll left and right. This isn’t quite as quick or intuitive as the MX Master’s thumb wheel, but it’s still nice to have. While it doesn’t match the Basilisk in performance, the Pro Click V2 is more affordable and a professional option that still has the sturdy build quality and responsive sensors Razer is known for.

Image may contain Computer Hardware Electronics Hardware and Mouse

Keychron M6

Photograph: Henri Robbins

Keychron M6 for $70: If you like the design of the MX Master line, but would prefer a more gaming-oriented mouse, the Keychron M6 is a nice alternative. While the M6 doesn’t have Logitech’s advanced gesture controls or soft-touch exterior, it maintains the dual-mode scroll wheel, horizontal wheel, and general ergonomics while adding a 4,000-Hz refresh rate and shaving off almost half the weight of the 3S at only 78 grams. However, some small issues of build quality and a loss of functionality make this a less-than-ideal choice for most users—the dual-mode scroll wheel rattles during use, and the mouse feels lightweight to a fault. The higher-performance model’s wireless receiver requires a USB-C cable to connect to a device, which is a lot less convenient for laptop users compared to the low-profile dongle included with the 1,000-Hz model (and most other mice today).

Image may contain Computer Hardware Electronics Hardware Mouse Computer Laptop and Pc

Keychron M4

Photograph: Henri Robbins

Keychron M4 for $70: While you can realistically transport any of the mice on this list in a backpack or computer bag, I was impressed by just how compact the Keychron M4 is. I could easily slip it into a laptop bag or jacket pocket without any issue, and I even used it as a travel mouse for quite a while. While the shape isn’t great, or even good, ergonomically, I found the claw grip quite comfortable even during prolonged gaming sessions. However, it isn’t good enough that I would recommend it to anyone for daily use on a desktop setup unless they want the lightest mouse possible. The only real complaint I had with this mouse was the dongle: The 4,000-Hz model comes with a receiver shaped like a tiny keyboard with a USB-C port on the back, which meant I needed a cable to connect the receiver and a flat surface to place it on. Meanwhile, the 1,000-Hz model came with a simple USB dongle that could plug into the side of a laptop.

Image may contain Computer Hardware Electronics Hardware and Mouse

Logitech Pro X Superlight 2 Dex

Courtesy of Logitech

Logitech Pro X Superlight 2 Dex for $140: While this mouse is intended for high-intensity competitive gaming, I found its sculpted shape to be practical and comfortable for any long-term use, and its lightweight (60 grams!), no-frills design was quick and snappy for both spreadsheets and shooters. The mouse felt incredibly sturdy despite its weight, and the 8-kHz polling combined with a 44k-dpi sensor makes it the best-performing mouse on this list. While pricey, the Superlight DEX is a great single-mouse solution for someone who works from home and immediately starts queueing up after clocking out. It has a far more gaming-focused lean than the Razer Basilisk V3, which, while not bad, means you’re making a few more sacrifices to productivity in exchange for gaming performance.

Image may contain Computer Hardware Electronics Hardware and Mouse

Logitech MX Vertical

Photograph: Henri Robbins

Logitech MX Vertical for $120: While this mouse’s size and general shape both feel good for regular use, I found the shape to be a bit uncomfortable to fully grip and lift: A prominent ridge on the back dug into the space between my thumb and index finger, and the shape was just a bit too narrow to get a good hold on. However, the MX Vertical is still comfortable to hold with a looser grip, and it is perfectly serviceable for general office work and browsing, while putting less strain on the wrist than a standard horizontal mouse.

Image may contain Computer Hardware Electronics Hardware and Mouse

Logitech Lift

Photograph: Henri Robbins

Logitech Lift for $79: As one of the smaller vertical mice on this list, the Lift is just a bit too small. I found it difficult to comfortably grip this mouse for prolonged use, and friends with smaller hands found the same. That said, WIRED reviews editor Julian Chokkattu says his 5’2″ wife uses the Life and finds it perfect for her small hands, so your mileage will vary. Regardless of hand size, a larger vertical mouse is typically more comfortable for most people. It’s worth noting that the Lift is one of the only vertical mice I’ve tested with a left-handed configuration.


Power up with unlimited access to WIRED. Get best-in-class reporting and exclusive subscriber content that’s too important to ignore. Subscribe Today.

Source link
#Switch #Ergonomic #Mouse #Give #Wrists #Break

After days of almost (and complete) darkness, the Moon is finally starting to reappear. We’re currently in the Waxing Crescent phase of the lunar cycle, which means each night until the Full Moon we’ll see it get more illuminated from the right side.

What is today’s Moon phase?

As of Sunday, April 19, the Moon phase is Waxing Crescent. Tonight, 5% of the moon will be lit up, according to NASA’s Daily Moon Guide.

Despite more of it now being illuminated, the percentage of surface is still too little to be able to spot any surface details. Check again tomorrow.

When is the next Full Moon?

The next Full Moon is predicted to take place on May 1, the first of two in May.

What are Moon phases?

NASA states that the Moon takes about 29.5 days to orbit Earth, during which it passes through eight distinct phases. We always see the same side of the Moon, but the amount of sunlight reflecting off it changes as it moves along its orbit, creating the familiar pattern of full, partial, and crescent shapes. We call these the lunar phases, and there are eight in total:

New Moon – The Moon is between Earth and the sun, so the side we see is dark (in other words, it’s invisible to the eye).

Waxing Crescent – A small sliver of light appears on the right side (Northern Hemisphere).

First Quarter – Half of the Moon is lit on the right side. It looks like a half-Moon.

Waxing Gibbous – More than half is lit up, but it’s not quite full yet.

Full Moon – The whole face of the Moon is illuminated and fully visible.

Waning Gibbous – The Moon starts losing light on the right side. (Northern Hemisphere)

Third Quarter (or Last Quarter) – Another half-Moon, but now the left side is lit.

Waning Crescent – A thin sliver of light remains on the left side before going dark again.

#Moon #phase #today #explained #Moon #April">Moon phase today explained: What the Moon will look like on April 19, 2026
                                                            After days of almost (and complete) darkness, the Moon is finally starting to reappear. We’re currently in the Waxing Crescent phase of the lunar cycle, which means each night until the Full Moon we’ll see it get more illuminated from the right side.What is today’s Moon phase?As of Sunday, April 19, the Moon phase is Waxing Crescent. Tonight, 5% of the moon will be lit up, according to NASA’s Daily Moon Guide.Despite more of it now being illuminated, the percentage of surface is still too little to be able to spot any surface details. Check again tomorrow.
When is the next Full Moon?The next Full Moon is predicted to take place on May 1, the first of two in May.What are Moon phases?NASA states that the Moon takes about 29.5 days to orbit Earth, during which it passes through eight distinct phases. We always see the same side of the Moon, but the amount of sunlight reflecting off it changes as it moves along its orbit, creating the familiar pattern of full, partial, and crescent shapes. We call these the lunar phases, and there are eight in total:New Moon – The Moon is between Earth and the sun, so the side we see is dark (in other words, it’s invisible to the eye).
        
            Mashable Light Speed
        
        
    
Waxing Crescent – A small sliver of light appears on the right side (Northern Hemisphere).First Quarter – Half of the Moon is lit on the right side. It looks like a half-Moon.Waxing Gibbous – More than half is lit up, but it’s not quite full yet.Full Moon – The whole face of the Moon is illuminated and fully visible.Waning Gibbous – The Moon starts losing light on the right side. (Northern Hemisphere)Third Quarter (or Last Quarter) – Another half-Moon, but now the left side is lit.Waning Crescent – A thin sliver of light remains on the left side before going dark again.

                    
                                    #Moon #phase #today #explained #Moon #April

Moon phase is Waxing Crescent. Tonight, 5% of the moon will be lit up, according to NASA’s Daily Moon Guide.

Despite more of it now being illuminated, the percentage of surface is still too little to be able to spot any surface details. Check again tomorrow.

When is the next Full Moon?

The next Full Moon is predicted to take place on May 1, the first of two in May.

What are Moon phases?

NASA states that the Moon takes about 29.5 days to orbit Earth, during which it passes through eight distinct phases. We always see the same side of the Moon, but the amount of sunlight reflecting off it changes as it moves along its orbit, creating the familiar pattern of full, partial, and crescent shapes. We call these the lunar phases, and there are eight in total:

New Moon – The Moon is between Earth and the sun, so the side we see is dark (in other words, it’s invisible to the eye).

Waxing Crescent – A small sliver of light appears on the right side (Northern Hemisphere).

First Quarter – Half of the Moon is lit on the right side. It looks like a half-Moon.

Waxing Gibbous – More than half is lit up, but it’s not quite full yet.

Full Moon – The whole face of the Moon is illuminated and fully visible.

Waning Gibbous – The Moon starts losing light on the right side. (Northern Hemisphere)

Third Quarter (or Last Quarter) – Another half-Moon, but now the left side is lit.

Waning Crescent – A thin sliver of light remains on the left side before going dark again.

#Moon #phase #today #explained #Moon #April">Moon phase today explained: What the Moon will look like on April 19, 2026

After days of almost (and complete) darkness, the Moon is finally starting to reappear. We’re currently in the Waxing Crescent phase of the lunar cycle, which means each night until the Full Moon we’ll see it get more illuminated from the right side.

What is today’s Moon phase?

As of Sunday, April 19, the Moon phase is Waxing Crescent. Tonight, 5% of the moon will be lit up, according to NASA’s Daily Moon Guide.

Despite more of it now being illuminated, the percentage of surface is still too little to be able to spot any surface details. Check again tomorrow.

When is the next Full Moon?

The next Full Moon is predicted to take place on May 1, the first of two in May.

What are Moon phases?

NASA states that the Moon takes about 29.5 days to orbit Earth, during which it passes through eight distinct phases. We always see the same side of the Moon, but the amount of sunlight reflecting off it changes as it moves along its orbit, creating the familiar pattern of full, partial, and crescent shapes. We call these the lunar phases, and there are eight in total:

New Moon – The Moon is between Earth and the sun, so the side we see is dark (in other words, it’s invisible to the eye).

Waxing Crescent – A small sliver of light appears on the right side (Northern Hemisphere).

First Quarter – Half of the Moon is lit on the right side. It looks like a half-Moon.

Waxing Gibbous – More than half is lit up, but it’s not quite full yet.

Full Moon – The whole face of the Moon is illuminated and fully visible.

Waning Gibbous – The Moon starts losing light on the right side. (Northern Hemisphere)

Third Quarter (or Last Quarter) – Another half-Moon, but now the left side is lit.

Waning Crescent – A thin sliver of light remains on the left side before going dark again.

#Moon #phase #today #explained #Moon #April
According to Nikkei Asia, even as suppliers ramp up DRAM production, manufacturers are only expected to meet 60 percent of demand by the end of 2027. SK Group chairman has even said that shortages could last until 2030.

The world’s largest memory makers — Samsung, SK Hynix, and Micron — are all working to add new fabrication capacity, but almost none of it will be online until at least 2027, if not 2028. SK opened a fab in Cheongju in February, but that is the only increase in production among the three for 2026.

Nikkei says that production would need to increase by 12 percent a year in 2026 and 2027 to meet demand. But according to Counterpoint Research, an increase of only 7.5 percent is planned.

The new facilities will primarily focus on producing high-bandwidth memory (HBM), which is used in AI data centers. With the companies already prioritizing HBM over general-purpose DRAM used in computers and phones, it’s not clear how much these new fabs will help alleviate the price crunch facing consumer electronics. Everything from phones and laptops, to VR headsets and gaming handhelds have seen price increases due to the RAM shortage.

#RAM #shortage #yearsAI,News,Tech">The RAM shortage could last yearsAccording to Nikkei Asia, even as suppliers ramp up DRAM production, manufacturers are only expected to meet 60 percent of demand by the end of 2027. SK Group chairman has even said that shortages could last until 2030.The world’s largest memory makers — Samsung, SK Hynix, and Micron — are all working to add new fabrication capacity, but almost none of it will be online until at least 2027, if not 2028. SK opened a fab in Cheongju in February, but that is the only increase in production among the three for 2026.Nikkei says that production would need to increase by 12 percent a year in 2026 and 2027 to meet demand. But according to Counterpoint Research, an increase of only 7.5 percent is planned.The new facilities will primarily focus on producing high-bandwidth memory (HBM), which is used in AI data centers. With the companies already prioritizing HBM over general-purpose DRAM used in computers and phones, it’s not clear how much these new fabs will help alleviate the price crunch facing consumer electronics. Everything from phones and laptops, to VR headsets and gaming handhelds have seen price increases due to the RAM shortage.#RAM #shortage #yearsAI,News,Tech

Nikkei Asia, even as suppliers ramp up DRAM production, manufacturers are only expected to meet 60 percent of demand by the end of 2027. SK Group chairman has even said that shortages could last until 2030.

The world’s largest memory makers — Samsung, SK Hynix, and Micron — are all working to add new fabrication capacity, but almost none of it will be online until at least 2027, if not 2028. SK opened a fab in Cheongju in February, but that is the only increase in production among the three for 2026.

Nikkei says that production would need to increase by 12 percent a year in 2026 and 2027 to meet demand. But according to Counterpoint Research, an increase of only 7.5 percent is planned.

The new facilities will primarily focus on producing high-bandwidth memory (HBM), which is used in AI data centers. With the companies already prioritizing HBM over general-purpose DRAM used in computers and phones, it’s not clear how much these new fabs will help alleviate the price crunch facing consumer electronics. Everything from phones and laptops, to VR headsets and gaming handhelds have seen price increases due to the RAM shortage.

#RAM #shortage #yearsAI,News,Tech">The RAM shortage could last years

According to Nikkei Asia, even as suppliers ramp up DRAM production, manufacturers are only expected to meet 60 percent of demand by the end of 2027. SK Group chairman has even said that shortages could last until 2030.

The world’s largest memory makers — Samsung, SK Hynix, and Micron — are all working to add new fabrication capacity, but almost none of it will be online until at least 2027, if not 2028. SK opened a fab in Cheongju in February, but that is the only increase in production among the three for 2026.

Nikkei says that production would need to increase by 12 percent a year in 2026 and 2027 to meet demand. But according to Counterpoint Research, an increase of only 7.5 percent is planned.

The new facilities will primarily focus on producing high-bandwidth memory (HBM), which is used in AI data centers. With the companies already prioritizing HBM over general-purpose DRAM used in computers and phones, it’s not clear how much these new fabs will help alleviate the price crunch facing consumer electronics. Everything from phones and laptops, to VR headsets and gaming handhelds have seen price increases due to the RAM shortage.

#RAM #shortage #yearsAI,News,Tech

Post Comment