×
What does it mean when Uncle Sam is one of your biggest shareholders? Chip startup xLight is about to find out | TechCrunch

What does it mean when Uncle Sam is one of your biggest shareholders? Chip startup xLight is about to find out | TechCrunch

The Trump administration has agreed to inject up to $150 million into xLight, a semiconductor startup developing advanced chip-making technology, marking the third time the U.S. government has taken an equity position in a private startup and further expanding a controversial strategy that has put Washington on the cap tables of American companies.

The Wall Street Journal reported Monday that the Commerce Department will provide the funding to xLight in exchange for an equity stake that will likely make the government the startup’s largest shareholder. The deal uses funding from the 2022 Chips and Science Act and represents the first Chips Act award in President Trump’s second term, though it remains preliminary and subject to change.

Previous government equity investments under the Trump administration include publicly traded companies Intel, MP Materials, Lithium Americas, and Trilogy Metals. Two rare earths startups also secured funding in exchange for equity from the Commerce Department last month.

You can imagine how this is all going over in Silicon Valley, where the libertarian ethos runs deep. At TechCrunch’s signature Disrupt event back in October, Sequoia Capital’s Roelof Botha jokingly offered what might be the understatement of the year when asked about the trend: “[Some] of the most dangerous words in the world are: ‘I’m from the government, and I’m here to help.’”

Other VCs have similarly expressed concerns, if quietly, about what it means when their portfolio companies are suddenly competing against startups backed by the U.S. Treasury, or even when they find themselves sitting across the table from government representatives at board meetings.

The four-year-old, Palo Alto, California, company at the center of this particular experiment is trying to do something genuinely audacious in semiconductor manufacturing. XLight wants to build particle accelerator-powered lasers — machines the size of a football field, mind you — that would create more powerful and precise light sources for making chips.

If it works, it could challenge the near-total dominance of ASML, the Dutch giant that has been publicly traded since 1995 and currently enjoys an absolute monopoly on extreme ultraviolet lithography machines. (Its shares have surged 48.6% this year.)

Techcrunch event

San Francisco
|
October 13-15, 2026

The CEO of xLight is Nicholas Kelez, a quantum computing and government labs veteran who presumably knows his way around a particle accelerator. Helping this venture as executive chairman is Pat Gelsinger, the former Intel CEO who was shown the door late last year after his ambitious manufacturing revival plans failed to materialize.

“I wasn’t done yet,” Gelsinger — who is also a general partner at Playground Global, which led the startup’s $40 million funding round this summer — told the Journal, adding that the effort is “deeply personal” to him.

Indeed, xLight doesn’t just want to compete with ASML but to go much further. While ASML’s machines work at wavelengths around 13.5 nanometers, xLight is targeting 2 nanometers. Gelsinger claims the technology could boost wafer processing efficiency by 30% to 40% while using far less energy.

As it happens, both Kelez and Gelsinger will be holding forth at TechCrunch’s StrictlyVC event on Wednesday night in Palo Alto, where the government’s backing will no doubt come up. (You can still nab a seat here.)

Commerce Secretary Howard Lutnick, for his part, insists this is all in service of national security and technological leadership, saying the partnership could “fundamentally rewrite the limits of chipmaking.” Critics will continue to question whether taxpayer-funded equity stakes represent visionary industrial policy or state capitalism with a patriotic sheen, though even skeptics acknowledge the geopolitical reality.

At least Botha, who described himself at Disrupt as a “sort of libertarian, free market thinker by nature,” conceded that industrial policy has its place when national interests demand it. “The only reason the U.S. is resorting to this is because we have other nation states with whom we compete who are using industrial policy to further their industries that are strategic and maybe adverse to the U.S. in long-term interests.”

Source link
#Uncle #Sam #biggest #shareholders #Chip #startup #xLight #find #TechCrunch


Most of us sense we’re in an affordability crisis these days. If you’re like me, you’re helpless and complacent at the checkstand even when it feels like you’re being mugged. But being billed for billions—or even trillions—more than you owe on web hosting would snap anyone out of their affordability daze.

Amazon Web Services users around the world have noticed one such glitch:

Bharath, an X user based in India, showed off what looks like a $1,499,659,180,107 cost statement and writes, “my soul left my body.” That statement says Bharath’s total is up by 744,728,201,771% this month, which means, by my math, the previous month’s bill was about $200.

According to the Guardian, a marketer named  Dan Harvey, working for an educational nonprofit in the U.K. said he “almost had a heart attack” after seeing a bill climb from 43 cents last month to $7.8 billion this month—and the month wasn’t even over. Harvey added to the Guardian that he had to get on the phone with tech support and “have a real dig around,” to get to the bottom of things. Amazon did not apparently return the Guardian’s request for comment.

This has been resolved, according to Amazon, which writes that on July 16 and 17, “customers received erroneous budget and cost anomaly detection alerts, and saw inflated estimated cost and usage data in the Billing and Cost Management Console and the Cost and Usage Reports.” The amounts are “inaccurate” and “did not affect customer invoices,” Amazon writes, but everything has apparently been restored to normal.

An update Saturday on the AWS service health dashboard lays out what happened. Apparently on July 16, a faulty “configuration change” in the AWS billing system was implemented. “This system relies on unit conversion data to calculate line item charges,” AWS writes, but the change “caused updates to the unit conversion data to fail, resulting in inflated line item costs, which propagated to the Billing and Cost Management console and triggered the budget and cost anomaly alerts.”

Logs on the health dashboard show AWS trying to roll out a solution for about two days before marking the issue as fully resolved.

#Soul #Left #Body #Amazon #Accidentally #Bills #Users #Billions #Times #Oweaffordability crisis,AWS,billing">‘My Soul Left My Body’: Amazon Accidentally Bills Users Billions of Times What They Owe
                Most of us sense we’re in an affordability crisis these days. If you’re like me, you’re helpless and complacent at the checkstand even when it feels like you’re being mugged. But being billed for billions—or even trillions—more than you owe on web hosting would snap anyone out of their affordability daze. Amazon Web Services users around the world have noticed one such glitch:  I just saw .5 trillion on my AWS bill and my soul left my body https://t.co/EgfQKJTHVl pic.twitter.com/L0gXYbDio7 — Bharath (@Bharath_uwu) July 17, 2026  Bharath, an X user based in India, showed off what looks like a ,499,659,180,107 cost statement and writes, “my soul left my body.” That statement says Bharath’s total is up by 744,728,201,771% this month, which means, by my math, the previous month’s bill was about 0. According to the Guardian, a marketer named  Dan Harvey, working for an educational nonprofit in the U.K. said he “almost had a heart attack” after seeing a bill climb from 43 cents last month to .8 billion this month—and the month wasn’t even over. Harvey added to the Guardian that he had to get on the phone with tech support and “have a real dig around,” to get to the bottom of things. Amazon did not apparently return the Guardian’s request for comment.

 This has been resolved, according to Amazon, which writes that on July 16 and 17, “customers received erroneous budget and cost anomaly detection alerts, and saw inflated estimated cost and usage data in the Billing and Cost Management Console and the Cost and Usage Reports.” The amounts are “inaccurate” and “did not affect customer invoices,” Amazon writes, but everything has apparently been restored to normal.

 An update Saturday on the AWS service health dashboard lays out what happened. Apparently on July 16, a faulty “configuration change” in the AWS billing system was implemented. “This system relies on unit conversion data to calculate line item charges,” AWS writes, but the change “caused updates to the unit conversion data to fail, resulting in inflated line item costs, which propagated to the Billing and Cost Management console and triggered the budget and cost anomaly alerts.” Logs on the health dashboard show AWS trying to roll out a solution for about two days before marking the issue as fully resolved.      #Soul #Left #Body #Amazon #Accidentally #Bills #Users #Billions #Times #Oweaffordability crisis,AWS,billing

Bharath, an X user based in India, showed off what looks like a $1,499,659,180,107 cost statement and writes, “my soul left my body.” That statement says Bharath’s total is up by 744,728,201,771% this month, which means, by my math, the previous month’s bill was about $200.

According to the Guardian, a marketer named  Dan Harvey, working for an educational nonprofit in the U.K. said he “almost had a heart attack” after seeing a bill climb from 43 cents last month to $7.8 billion this month—and the month wasn’t even over. Harvey added to the Guardian that he had to get on the phone with tech support and “have a real dig around,” to get to the bottom of things. Amazon did not apparently return the Guardian’s request for comment.

This has been resolved, according to Amazon, which writes that on July 16 and 17, “customers received erroneous budget and cost anomaly detection alerts, and saw inflated estimated cost and usage data in the Billing and Cost Management Console and the Cost and Usage Reports.” The amounts are “inaccurate” and “did not affect customer invoices,” Amazon writes, but everything has apparently been restored to normal.

An update Saturday on the AWS service health dashboard lays out what happened. Apparently on July 16, a faulty “configuration change” in the AWS billing system was implemented. “This system relies on unit conversion data to calculate line item charges,” AWS writes, but the change “caused updates to the unit conversion data to fail, resulting in inflated line item costs, which propagated to the Billing and Cost Management console and triggered the budget and cost anomaly alerts.”

Logs on the health dashboard show AWS trying to roll out a solution for about two days before marking the issue as fully resolved.

#Soul #Left #Body #Amazon #Accidentally #Bills #Users #Billions #Times #Oweaffordability crisis,AWS,billing">‘My Soul Left My Body’: Amazon Accidentally Bills Users Billions of Times What They Owe‘My Soul Left My Body’: Amazon Accidentally Bills Users Billions of Times What They Owe
                Most of us sense we’re in an affordability crisis these days. If you’re like me, you’re helpless and complacent at the checkstand even when it feels like you’re being mugged. But being billed for billions—or even trillions—more than you owe on web hosting would snap anyone out of their affordability daze. Amazon Web Services users around the world have noticed one such glitch:  I just saw $1.5 trillion on my AWS bill and my soul left my body https://t.co/EgfQKJTHVl pic.twitter.com/L0gXYbDio7 — Bharath (@Bharath_uwu) July 17, 2026  Bharath, an X user based in India, showed off what looks like a $1,499,659,180,107 cost statement and writes, “my soul left my body.” That statement says Bharath’s total is up by 744,728,201,771% this month, which means, by my math, the previous month’s bill was about $200. According to the Guardian, a marketer named  Dan Harvey, working for an educational nonprofit in the U.K. said he “almost had a heart attack” after seeing a bill climb from 43 cents last month to $7.8 billion this month—and the month wasn’t even over. Harvey added to the Guardian that he had to get on the phone with tech support and “have a real dig around,” to get to the bottom of things. Amazon did not apparently return the Guardian’s request for comment.

 This has been resolved, according to Amazon, which writes that on July 16 and 17, “customers received erroneous budget and cost anomaly detection alerts, and saw inflated estimated cost and usage data in the Billing and Cost Management Console and the Cost and Usage Reports.” The amounts are “inaccurate” and “did not affect customer invoices,” Amazon writes, but everything has apparently been restored to normal.

 An update Saturday on the AWS service health dashboard lays out what happened. Apparently on July 16, a faulty “configuration change” in the AWS billing system was implemented. “This system relies on unit conversion data to calculate line item charges,” AWS writes, but the change “caused updates to the unit conversion data to fail, resulting in inflated line item costs, which propagated to the Billing and Cost Management console and triggered the budget and cost anomaly alerts.” Logs on the health dashboard show AWS trying to roll out a solution for about two days before marking the issue as fully resolved.      #Soul #Left #Body #Amazon #Accidentally #Bills #Users #Billions #Times #Oweaffordability crisis,AWS,billing

Most of us sense we’re in an affordability crisis these days. If you’re like me, you’re helpless and complacent at the checkstand even when it feels like you’re being mugged. But being billed for billions—or even trillions—more than you owe on web hosting would snap anyone out of their affordability daze.

Amazon Web Services users around the world have noticed one such glitch:

Bharath, an X user based in India, showed off what looks like a $1,499,659,180,107 cost statement and writes, “my soul left my body.” That statement says Bharath’s total is up by 744,728,201,771% this month, which means, by my math, the previous month’s bill was about $200.

According to the Guardian, a marketer named  Dan Harvey, working for an educational nonprofit in the U.K. said he “almost had a heart attack” after seeing a bill climb from 43 cents last month to $7.8 billion this month—and the month wasn’t even over. Harvey added to the Guardian that he had to get on the phone with tech support and “have a real dig around,” to get to the bottom of things. Amazon did not apparently return the Guardian’s request for comment.

This has been resolved, according to Amazon, which writes that on July 16 and 17, “customers received erroneous budget and cost anomaly detection alerts, and saw inflated estimated cost and usage data in the Billing and Cost Management Console and the Cost and Usage Reports.” The amounts are “inaccurate” and “did not affect customer invoices,” Amazon writes, but everything has apparently been restored to normal.

An update Saturday on the AWS service health dashboard lays out what happened. Apparently on July 16, a faulty “configuration change” in the AWS billing system was implemented. “This system relies on unit conversion data to calculate line item charges,” AWS writes, but the change “caused updates to the unit conversion data to fail, resulting in inflated line item costs, which propagated to the Billing and Cost Management console and triggered the budget and cost anomaly alerts.”

Logs on the health dashboard show AWS trying to roll out a solution for about two days before marking the issue as fully resolved.

#Soul #Left #Body #Amazon #Accidentally #Bills #Users #Billions #Times #Oweaffordability crisis,AWS,billing

Kini is very reliable. I tested it in a drawer and a cabinet, and it always alerted me when they were opened. It also keeps a log with times listed. While alerts go via the cloud, maker Kinisium says it doesn’t collect data, and you can turn off logging entirely if you prefer. Kini also has a Stasis mode, so you can reverse it and have it alert you when there has been no movement for a set period. This makes it a versatile monitoring device, and you could use this mode to ensure an elderly relative opens their medicine cabinet each day or check what time your dog walker opened a door. Kini is also compatible with IFTTT for automation, and there’s even a webhook integration that can send notifications to a custom URL.

More Motion Sensors

There are loads of other motion sensors that can alert you to motion or presence in an area or room and trigger lighting, but the right one for you depends on your current smart-home setup.

I really like the Eve Motion Sensor, but if you want it to trigger alerts, you need a smart-home hub, and you must set up an automation. It’s a reliable sensor that works indoors or out. I tested it with a Google Home system.

The Aqara FP2 Presence Sensor ($83) has many features, including zonal and multiple person detection, and is compatible with all the major smart-home ecosystems, though it’s not always very accurate at identifying the number of people in the room. The more affordable Aqara FP300 ($50) is a good enough presence detector for most folks and can also track light, temperature, and humidity.

The Switchbot Presence Sensor ($30) is the most affordable sensor I tested and has a similar feature set, but you will need a Switchbot hub if you want alerts, and there’s a lag between it detecting and alerting.

Philips Hue

Outdoor Motion Sensor

The Philips Hue Outdoor Motion Sensor is excellent, but only if you already have a Hue setup, because it needs a Hue Bridge to connect to. I installed the sensor in my backyard and tested it with the Bridge Pro. It reliably detects people with few false positives. I configured my outdoor sensor to turn on a backyard light strip (not Hue) after sunset and send me a notification when triggered between specific hours (midnight and 6 am) using Google Gemini.

There’s also a Philips Hue Indoor Motion Sensor and a Contact Sensor ($40) for doors and windows. Both are very reliable and can be configured to trigger alerts.

Smart Light Sensing

As an interesting alternative to dedicated motion sensors, you can also use some smart lights for detect presence and motion indoors.

Wiz SpaceSense

If you have a few Wiz lights, you can try SpaceSense, which uses Wi-Fi to detect motion in rooms. I wasn’t that impressed when I tried SpaceSense, but how effectively it works depends on how many Wiz lights you have and where they are located. I was also testing it as a way to automatically turn lights on, and there’s some lag that limits its usefulness on that score. But as a security alert that can tell you when there’s motion in your home when you’re away, it could be very useful. If you already have Wiz lights, you may as well try it, as it doesn’t require a subscription.

Philips Hue MotionAware

Signify is the parent company of Wiz and Philips Hue, and MotionAware is very similar to SpaceSense, but it uses Zigbee, rather than Wi-Fi. Again, how well it works depends on the number of Philips Hue lights you have and their layout. Unfortunately, it does require a subscription if you want to receive alerts. MotionAware can trigger lights at no extra cost, but if you want motion alerts, you must pay $1 per month or $10 for the year. It is also included in Hue Secure subscriptions from $4 per month.

More Security System Alternatives

Image may contain: Electronics, Phone, Mobile Phone, Electrical Device, and Switch

SimpliSafe

8-Piece Wireless Home Security System

You might consider a modular security system. We like the Simplisafe system, which offers a base station, keypad, and a range of sensors. You can also find modular systems from security stalwarts like ADT and Vivint, and security camera makers like Eufy and Arlo.

#PrivacyFirst #Alternatives #Home #Security #Camerassecurity,shopping,privacy,smart home,sensors,buying guides">The Best Privacy-First Alternatives to Home Security CamerasKini is very reliable. I tested it in a drawer and a cabinet, and it always alerted me when they were opened. It also keeps a log with times listed. While alerts go via the cloud, maker Kinisium says it doesn’t collect data, and you can turn off logging entirely if you prefer. Kini also has a Stasis mode, so you can reverse it and have it alert you when there has been no movement for a set period. This makes it a versatile monitoring device, and you could use this mode to ensure an elderly relative opens their medicine cabinet each day or check what time your dog walker opened a door. Kini is also compatible with IFTTT for automation, and there’s even a webhook integration that can send notifications to a custom URL.More Motion SensorsThere are loads of other motion sensors that can alert you to motion or presence in an area or room and trigger lighting, but the right one for you depends on your current smart-home setup.I really like the Eve Motion Sensor, but if you want it to trigger alerts, you need a smart-home hub, and you must set up an automation. It’s a reliable sensor that works indoors or out. I tested it with a Google Home system.The Aqara FP2 Presence Sensor () has many features, including zonal and multiple person detection, and is compatible with all the major smart-home ecosystems, though it’s not always very accurate at identifying the number of people in the room. The more affordable Aqara FP300 () is a good enough presence detector for most folks and can also track light, temperature, and humidity.The Switchbot Presence Sensor () is the most affordable sensor I tested and has a similar feature set, but you will need a Switchbot hub if you want alerts, and there’s a lag between it detecting and alerting.Philips HueOutdoor Motion SensorThe Philips Hue Outdoor Motion Sensor is excellent, but only if you already have a Hue setup, because it needs a Hue Bridge to connect to. I installed the sensor in my backyard and tested it with the Bridge Pro. It reliably detects people with few false positives. I configured my outdoor sensor to turn on a backyard light strip (not Hue) after sunset and send me a notification when triggered between specific hours (midnight and 6 am) using Google Gemini.There’s also a Philips Hue Indoor Motion Sensor and a Contact Sensor () for doors and windows. Both are very reliable and can be configured to trigger alerts.Smart Light SensingAs an interesting alternative to dedicated motion sensors, you can also use some smart lights for detect presence and motion indoors.Wiz SpaceSenseIf you have a few Wiz lights, you can try SpaceSense, which uses Wi-Fi to detect motion in rooms. I wasn’t that impressed when I tried SpaceSense, but how effectively it works depends on how many Wiz lights you have and where they are located. I was also testing it as a way to automatically turn lights on, and there’s some lag that limits its usefulness on that score. But as a security alert that can tell you when there’s motion in your home when you’re away, it could be very useful. If you already have Wiz lights, you may as well try it, as it doesn’t require a subscription.Philips Hue MotionAwareSignify is the parent company of Wiz and Philips Hue, and MotionAware is very similar to SpaceSense, but it uses Zigbee, rather than Wi-Fi. Again, how well it works depends on the number of Philips Hue lights you have and their layout. Unfortunately, it does require a subscription if you want to receive alerts. MotionAware can trigger lights at no extra cost, but if you want motion alerts, you must pay  per month or  for the year. It is also included in Hue Secure subscriptions from  per month.More Security System AlternativesSimpliSafe8-Piece Wireless Home Security SystemYou might consider a modular security system. We like the Simplisafe system, which offers a base station, keypad, and a range of sensors. You can also find modular systems from security stalwarts like ADT and Vivint, and security camera makers like Eufy and Arlo.#PrivacyFirst #Alternatives #Home #Security #Camerassecurity,shopping,privacy,smart home,sensors,buying guides

IFTTT for automation, and there’s even a webhook integration that can send notifications to a custom URL.

More Motion Sensors

There are loads of other motion sensors that can alert you to motion or presence in an area or room and trigger lighting, but the right one for you depends on your current smart-home setup.

I really like the Eve Motion Sensor, but if you want it to trigger alerts, you need a smart-home hub, and you must set up an automation. It’s a reliable sensor that works indoors or out. I tested it with a Google Home system.

The Aqara FP2 Presence Sensor ($83) has many features, including zonal and multiple person detection, and is compatible with all the major smart-home ecosystems, though it’s not always very accurate at identifying the number of people in the room. The more affordable Aqara FP300 ($50) is a good enough presence detector for most folks and can also track light, temperature, and humidity.

The Switchbot Presence Sensor ($30) is the most affordable sensor I tested and has a similar feature set, but you will need a Switchbot hub if you want alerts, and there’s a lag between it detecting and alerting.

Philips Hue

Outdoor Motion Sensor

The Philips Hue Outdoor Motion Sensor is excellent, but only if you already have a Hue setup, because it needs a Hue Bridge to connect to. I installed the sensor in my backyard and tested it with the Bridge Pro. It reliably detects people with few false positives. I configured my outdoor sensor to turn on a backyard light strip (not Hue) after sunset and send me a notification when triggered between specific hours (midnight and 6 am) using Google Gemini.

There’s also a Philips Hue Indoor Motion Sensor and a Contact Sensor ($40) for doors and windows. Both are very reliable and can be configured to trigger alerts.

Smart Light Sensing

As an interesting alternative to dedicated motion sensors, you can also use some smart lights for detect presence and motion indoors.

Wiz SpaceSense

If you have a few Wiz lights, you can try SpaceSense, which uses Wi-Fi to detect motion in rooms. I wasn’t that impressed when I tried SpaceSense, but how effectively it works depends on how many Wiz lights you have and where they are located. I was also testing it as a way to automatically turn lights on, and there’s some lag that limits its usefulness on that score. But as a security alert that can tell you when there’s motion in your home when you’re away, it could be very useful. If you already have Wiz lights, you may as well try it, as it doesn’t require a subscription.

Philips Hue MotionAware

Signify is the parent company of Wiz and Philips Hue, and MotionAware is very similar to SpaceSense, but it uses Zigbee, rather than Wi-Fi. Again, how well it works depends on the number of Philips Hue lights you have and their layout. Unfortunately, it does require a subscription if you want to receive alerts. MotionAware can trigger lights at no extra cost, but if you want motion alerts, you must pay $1 per month or $10 for the year. It is also included in Hue Secure subscriptions from $4 per month.

More Security System Alternatives

Image may contain: Electronics, Phone, Mobile Phone, Electrical Device, and Switch

SimpliSafe

8-Piece Wireless Home Security System

You might consider a modular security system. We like the Simplisafe system, which offers a base station, keypad, and a range of sensors. You can also find modular systems from security stalwarts like ADT and Vivint, and security camera makers like Eufy and Arlo.

#PrivacyFirst #Alternatives #Home #Security #Camerassecurity,shopping,privacy,smart home,sensors,buying guides">The Best Privacy-First Alternatives to Home Security Cameras

Kini is very reliable. I tested it in a drawer and a cabinet, and it always alerted me when they were opened. It also keeps a log with times listed. While alerts go via the cloud, maker Kinisium says it doesn’t collect data, and you can turn off logging entirely if you prefer. Kini also has a Stasis mode, so you can reverse it and have it alert you when there has been no movement for a set period. This makes it a versatile monitoring device, and you could use this mode to ensure an elderly relative opens their medicine cabinet each day or check what time your dog walker opened a door. Kini is also compatible with IFTTT for automation, and there’s even a webhook integration that can send notifications to a custom URL.

More Motion Sensors

There are loads of other motion sensors that can alert you to motion or presence in an area or room and trigger lighting, but the right one for you depends on your current smart-home setup.

I really like the Eve Motion Sensor, but if you want it to trigger alerts, you need a smart-home hub, and you must set up an automation. It’s a reliable sensor that works indoors or out. I tested it with a Google Home system.

The Aqara FP2 Presence Sensor ($83) has many features, including zonal and multiple person detection, and is compatible with all the major smart-home ecosystems, though it’s not always very accurate at identifying the number of people in the room. The more affordable Aqara FP300 ($50) is a good enough presence detector for most folks and can also track light, temperature, and humidity.

The Switchbot Presence Sensor ($30) is the most affordable sensor I tested and has a similar feature set, but you will need a Switchbot hub if you want alerts, and there’s a lag between it detecting and alerting.

Philips Hue

Outdoor Motion Sensor

The Philips Hue Outdoor Motion Sensor is excellent, but only if you already have a Hue setup, because it needs a Hue Bridge to connect to. I installed the sensor in my backyard and tested it with the Bridge Pro. It reliably detects people with few false positives. I configured my outdoor sensor to turn on a backyard light strip (not Hue) after sunset and send me a notification when triggered between specific hours (midnight and 6 am) using Google Gemini.

There’s also a Philips Hue Indoor Motion Sensor and a Contact Sensor ($40) for doors and windows. Both are very reliable and can be configured to trigger alerts.

Smart Light Sensing

As an interesting alternative to dedicated motion sensors, you can also use some smart lights for detect presence and motion indoors.

Wiz SpaceSense

If you have a few Wiz lights, you can try SpaceSense, which uses Wi-Fi to detect motion in rooms. I wasn’t that impressed when I tried SpaceSense, but how effectively it works depends on how many Wiz lights you have and where they are located. I was also testing it as a way to automatically turn lights on, and there’s some lag that limits its usefulness on that score. But as a security alert that can tell you when there’s motion in your home when you’re away, it could be very useful. If you already have Wiz lights, you may as well try it, as it doesn’t require a subscription.

Philips Hue MotionAware

Signify is the parent company of Wiz and Philips Hue, and MotionAware is very similar to SpaceSense, but it uses Zigbee, rather than Wi-Fi. Again, how well it works depends on the number of Philips Hue lights you have and their layout. Unfortunately, it does require a subscription if you want to receive alerts. MotionAware can trigger lights at no extra cost, but if you want motion alerts, you must pay $1 per month or $10 for the year. It is also included in Hue Secure subscriptions from $4 per month.

More Security System Alternatives

Image may contain: Electronics, Phone, Mobile Phone, Electrical Device, and Switch

SimpliSafe

8-Piece Wireless Home Security System

You might consider a modular security system. We like the Simplisafe system, which offers a base station, keypad, and a range of sensors. You can also find modular systems from security stalwarts like ADT and Vivint, and security camera makers like Eufy and Arlo.

#PrivacyFirst #Alternatives #Home #Security #Camerassecurity,shopping,privacy,smart home,sensors,buying guides

Post Comment