×
Artemis II Countdown: How and When to Watch the Launch

Artemis II Countdown: How and When to Watch the Launch

Tech-news , , , ,

After multiple delays, rocket repairs, and a restructuring of the program to return to the moon, the Artemis II mission is ready for liftoff. If there are no problems, four astronauts will inaugurate NASA’s new lunar campaign on Wednesday, more than 50 years after the Apollo era.

The Artemis II crew will not descend to the moon; that won’t happen until Artemis IV. But their capsule will fly 6,000 to 9,000 kilometers over the surface of the hidden side of Earth’s satellite, circle it, and make the return trip home. The main objective of the mission is to demonstrate that the space agency has the technological capability to send people to the moon safely and without mishap.

Once this is achieved, NASA will begin preparations for new lunar landings during the following years, which will aim to consolidate the first lunar bases in history and with it, the sustained and sustainable presence of human beings on the satellite.

When and Where Can You Watch the Artemis II Liftoff?

The new launch window opens Wednesday, April 1 at 6:24 pm EDT and will last for two hours. This means that once all the protocol tests are done, liftoff of the Artemis II mission could occur anytime between 6:24 pm and 8:24 pm EDT. There is no exact time, because the trip is cleared based on technical, weather, and space traffic conditions. If something prevents the launch this Wednesday, NASA has five more days to try again.

Monday, April 6, would be the last day of this launch window. If unsuccessful this time, the launch window would be pushed to April 30.

According to NASA, the live broadcast will be available on its YouTube channel. The stream will begin at 7:45 am with coverage of tank operations to load the booster. Meanwhile, at 12:50 pm the official coverage will begin and carry on until liftoff. Two hours after the launch, NASA will hold a press conference.

Mission Details

The astronauts will take off in a NASA SLS rocket and travel inside the Orion capsule, described as a spacecraft about the size of a large van. They will orbit Earth for at least two days to test the onboard instruments. Then they will align the spacecraft to begin its journey to the moon. By the fifth or sixth day of flight, the capsule is expected to enter the moon’s sphere of influence, where the satellite’s gravity is stronger than Earth’s, and dock with its orbit.

When the spacecraft passes “behind” the moon, the most dangerous phase will begin. The crew will be out of contact with Earth for about 50 minutes due to interference from the moon itself. During this crucial moment, the crew must capture images and data from the moon, taking advantage of the far-more-advanced technology they carry than was available during the Apollo era.

After completing the return, the capsule will head home, taking advantage of the Earth-moon gravity field to save fuel. According to NASA estimates, by the 10th day of flight the crew will be close to reaching the planet.

Source link
#Artemis #Countdown #Watch #Launch

Tag

Related Posts

real-life ray gun into a 747 to shoot down ballistic missiles and stuck a laser on top of a Humvee to zap roadside bombs. For more than 50 years, the United States military and its researchers have tried to develop laser weapons. None of them panned out.

But now, the US Army is about to make a working laser weapon an official part of its arsenal. The Pentagon is poised to sign a contract to acquire and rapidly deploy what’s called an Enduring High Energy Laser in and around bases across the world to defend them from drone attacks, according to sources familiar with the matter. The official announcement could come as early as this week. When the deal is signed, it will mark the first time that the US military will have committed to equipping its forces with laser weapons in significant numbers.

“For years, lasers were going to be the future, and they never really came to their own. Now, they’re actually coming to their own,” Mark J. Lewis, the former Air Force chief scientist, tells WIRED.

The Iran and Ukraine wars have shown that drones are now so cheap, so plentiful, and so deadly that they’re impossible to stop with any single countermeasure. Some of the traditional ones have been particularly clunky. During the early days of the Iran conflict, the US even resorted to firing $4 million Patriot missiles at $35,000 Iranian drones—a waste of money, and a move that depleted the American interceptor stockpile.

Modern lasers, on the other hand, never run out of ammunition. “Basically, you can keep firing them as long as you’ve got power,” Lewis says. “There are some other issues with lasers, including how rapidly you can refire and recharge. But if you solve those problems, then suddenly you’ve got a pretty nifty way to help counteract things like a drone swarm attack.”

That’s one reason why the US military, at this moment, has either deployed or is actively testing a half-dozen laser weapons systems, according to the Laser Wars newsletter. The Navy has installed laser “dazzlers” on two of its ships to blind drones’ electro-optical sensors. The Air Force’s command for Europe and Africa has sent Boeing’s Compact Laser Weapons System “to locations across the theater.” In late June, Defense Secretary Pete Hegseth traveled to the Army’s test range in White Sands, New Mexico, for a demonstration of all sorts of directed-energy weapon projects.

The deployments haven’t all gone great. Four vehicles equipped with Raytheon air-defense lasers were yanked from the Middle East after poor reviews from soldiers. One laser, built by the defense contractor AeroVironment and positioned along the southern US border, accidentally zapped a party balloon in February, causing the Federal Aviation Administration to briefly close the airspace around El Paso, Texas. Once it was reopened, the laser shot down a Border Patrol drone by mistake.

Despite such mishaps, the Army appears ready to go beyond the one-offs and the experiments. In fact, in some ways, the accidental kill helped make the case for the laser, proving it could actually take out such a drone.

The Pentagon and its suppliers had been scrambling to field something, anything to defend against mass-produced, low-cost attack drones. They’ve rolled out radio frequency jammers, microwave weapons, an array of missiles, drones designed to kill other drones, even copies of the Iranian robots. None of them in isolation have been enough. On March 1, an Iranian drone killed six US service members and injured 30 others.

#Landmark #Deal #Officially #Add #Laser #Weapons #Army #Arsenallasers,drones,weapons and ammo,iran,military,military tech,army">Landmark Deal Would Officially Add Laser Weapons to US Army ArsenalThey stuffed a real-life ray gun into a 747 to shoot down ballistic missiles and stuck a laser on top of a Humvee to zap roadside bombs. For more than 50 years, the United States military and its researchers have tried to develop laser weapons. None of them panned out.But now, the US Army is about to make a working laser weapon an official part of its arsenal. The Pentagon is poised to sign a contract to acquire and rapidly deploy what’s called an Enduring High Energy Laser in and around bases across the world to defend them from drone attacks, according to sources familiar with the matter. The official announcement could come as early as this week. When the deal is signed, it will mark the first time that the US military will have committed to equipping its forces with laser weapons in significant numbers.“For years, lasers were going to be the future, and they never really came to their own. Now, they’re actually coming to their own,” Mark J. Lewis, the former Air Force chief scientist, tells WIRED.The Iran and Ukraine wars have shown that drones are now so cheap, so plentiful, and so deadly that they’re impossible to stop with any single countermeasure. Some of the traditional ones have been particularly clunky. During the early days of the Iran conflict, the US even resorted to firing million Patriot missiles at ,000 Iranian drones—a waste of money, and a move that depleted the American interceptor stockpile.Modern lasers, on the other hand, never run out of ammunition. “Basically, you can keep firing them as long as you’ve got power,” Lewis says. “There are some other issues with lasers, including how rapidly you can refire and recharge. But if you solve those problems, then suddenly you’ve got a pretty nifty way to help counteract things like a drone swarm attack.”That’s one reason why the US military, at this moment, has either deployed or is actively testing a half-dozen laser weapons systems, according to the Laser Wars newsletter. The Navy has installed laser “dazzlers” on two of its ships to blind drones’ electro-optical sensors. The Air Force’s command for Europe and Africa has sent Boeing’s Compact Laser Weapons System “to locations across the theater.” In late June, Defense Secretary Pete Hegseth traveled to the Army’s test range in White Sands, New Mexico, for a demonstration of all sorts of directed-energy weapon projects.The deployments haven’t all gone great. Four vehicles equipped with Raytheon air-defense lasers were yanked from the Middle East after poor reviews from soldiers. One laser, built by the defense contractor AeroVironment and positioned along the southern US border, accidentally zapped a party balloon in February, causing the Federal Aviation Administration to briefly close the airspace around El Paso, Texas. Once it was reopened, the laser shot down a Border Patrol drone by mistake.Despite such mishaps, the Army appears ready to go beyond the one-offs and the experiments. In fact, in some ways, the accidental kill helped make the case for the laser, proving it could actually take out such a drone.The Pentagon and its suppliers had been scrambling to field something, anything to defend against mass-produced, low-cost attack drones. They’ve rolled out radio frequency jammers, microwave weapons, an array of missiles, drones designed to kill other drones, even copies of the Iranian robots. None of them in isolation have been enough. On March 1, an Iranian drone killed six US service members and injured 30 others.#Landmark #Deal #Officially #Add #Laser #Weapons #Army #Arsenallasers,drones,weapons and ammo,iran,military,military tech,army

to shoot down ballistic missiles and stuck a laser on top of a Humvee to zap roadside bombs. For more than 50 years, the United States military and its researchers have tried to develop laser weapons. None of them panned out.

But now, the US Army is about to make a working laser weapon an official part of its arsenal. The Pentagon is poised to sign a contract to acquire and rapidly deploy what’s called an Enduring High Energy Laser in and around bases across the world to defend them from drone attacks, according to sources familiar with the matter. The official announcement could come as early as this week. When the deal is signed, it will mark the first time that the US military will have committed to equipping its forces with laser weapons in significant numbers.

“For years, lasers were going to be the future, and they never really came to their own. Now, they’re actually coming to their own,” Mark J. Lewis, the former Air Force chief scientist, tells WIRED.

The Iran and Ukraine wars have shown that drones are now so cheap, so plentiful, and so deadly that they’re impossible to stop with any single countermeasure. Some of the traditional ones have been particularly clunky. During the early days of the Iran conflict, the US even resorted to firing $4 million Patriot missiles at $35,000 Iranian drones—a waste of money, and a move that depleted the American interceptor stockpile.

Modern lasers, on the other hand, never run out of ammunition. “Basically, you can keep firing them as long as you’ve got power,” Lewis says. “There are some other issues with lasers, including how rapidly you can refire and recharge. But if you solve those problems, then suddenly you’ve got a pretty nifty way to help counteract things like a drone swarm attack.”

That’s one reason why the US military, at this moment, has either deployed or is actively testing a half-dozen laser weapons systems, according to the Laser Wars newsletter. The Navy has installed laser “dazzlers” on two of its ships to blind drones’ electro-optical sensors. The Air Force’s command for Europe and Africa has sent Boeing’s Compact Laser Weapons System “to locations across the theater.” In late June, Defense Secretary Pete Hegseth traveled to the Army’s test range in White Sands, New Mexico, for a demonstration of all sorts of directed-energy weapon projects.

The deployments haven’t all gone great. Four vehicles equipped with Raytheon air-defense lasers were yanked from the Middle East after poor reviews from soldiers. One laser, built by the defense contractor AeroVironment and positioned along the southern US border, accidentally zapped a party balloon in February, causing the Federal Aviation Administration to briefly close the airspace around El Paso, Texas. Once it was reopened, the laser shot down a Border Patrol drone by mistake.

Despite such mishaps, the Army appears ready to go beyond the one-offs and the experiments. In fact, in some ways, the accidental kill helped make the case for the laser, proving it could actually take out such a drone.

The Pentagon and its suppliers had been scrambling to field something, anything to defend against mass-produced, low-cost attack drones. They’ve rolled out radio frequency jammers, microwave weapons, an array of missiles, drones designed to kill other drones, even copies of the Iranian robots. None of them in isolation have been enough. On March 1, an Iranian drone killed six US service members and injured 30 others.

#Landmark #Deal #Officially #Add #Laser #Weapons #Army #Arsenallasers,drones,weapons and ammo,iran,military,military tech,army">Landmark Deal Would Officially Add Laser Weapons to US Army Arsenal

They stuffed a real-life ray gun into a 747 to shoot down ballistic missiles and stuck a laser on top of a Humvee to zap roadside bombs. For more than 50 years, the United States military and its researchers have tried to develop laser weapons. None of them panned out.

But now, the US Army is about to make a working laser weapon an official part of its arsenal. The Pentagon is poised to sign a contract to acquire and rapidly deploy what’s called an Enduring High Energy Laser in and around bases across the world to defend them from drone attacks, according to sources familiar with the matter. The official announcement could come as early as this week. When the deal is signed, it will mark the first time that the US military will have committed to equipping its forces with laser weapons in significant numbers.

“For years, lasers were going to be the future, and they never really came to their own. Now, they’re actually coming to their own,” Mark J. Lewis, the former Air Force chief scientist, tells WIRED.

The Iran and Ukraine wars have shown that drones are now so cheap, so plentiful, and so deadly that they’re impossible to stop with any single countermeasure. Some of the traditional ones have been particularly clunky. During the early days of the Iran conflict, the US even resorted to firing $4 million Patriot missiles at $35,000 Iranian drones—a waste of money, and a move that depleted the American interceptor stockpile.

Modern lasers, on the other hand, never run out of ammunition. “Basically, you can keep firing them as long as you’ve got power,” Lewis says. “There are some other issues with lasers, including how rapidly you can refire and recharge. But if you solve those problems, then suddenly you’ve got a pretty nifty way to help counteract things like a drone swarm attack.”

That’s one reason why the US military, at this moment, has either deployed or is actively testing a half-dozen laser weapons systems, according to the Laser Wars newsletter. The Navy has installed laser “dazzlers” on two of its ships to blind drones’ electro-optical sensors. The Air Force’s command for Europe and Africa has sent Boeing’s Compact Laser Weapons System “to locations across the theater.” In late June, Defense Secretary Pete Hegseth traveled to the Army’s test range in White Sands, New Mexico, for a demonstration of all sorts of directed-energy weapon projects.

The deployments haven’t all gone great. Four vehicles equipped with Raytheon air-defense lasers were yanked from the Middle East after poor reviews from soldiers. One laser, built by the defense contractor AeroVironment and positioned along the southern US border, accidentally zapped a party balloon in February, causing the Federal Aviation Administration to briefly close the airspace around El Paso, Texas. Once it was reopened, the laser shot down a Border Patrol drone by mistake.

Despite such mishaps, the Army appears ready to go beyond the one-offs and the experiments. In fact, in some ways, the accidental kill helped make the case for the laser, proving it could actually take out such a drone.

The Pentagon and its suppliers had been scrambling to field something, anything to defend against mass-produced, low-cost attack drones. They’ve rolled out radio frequency jammers, microwave weapons, an array of missiles, drones designed to kill other drones, even copies of the Iranian robots. None of them in isolation have been enough. On March 1, an Iranian drone killed six US service members and injured 30 others.

#Landmark #Deal #Officially #Add #Laser #Weapons #Army #Arsenallasers,drones,weapons and ammo,iran,military,military tech,army

The internet moves fast. Fortunately, you don’t have to spend all day refreshing your browser to keep up with it.

Mashable push notifications deliver our latest news, trending stories, and hottest deals directly to your screen. Here’s how to turn them on in just a few clicks.

Google Chrome on Android

  1. Open Chrome and visit Mashable.com.

  2. Tap the three-dot menu to the right of the address bar.

  3. Select Settings, followed by Site settings and Notifications.

  4. Make sure notifications are enabled.

  5. Return to Mashable. Tap the site information icon to the left of the address bar, select Permissions, and set Notifications to Allow.

Google Chrome on a PC or Mac

  1. Visit Mashable.com.

  2. Click the View site information icon to the left of the URL in your address bar.

  3. Select Site settings from the menu.

  4. Find Notifications and select Allow from the dropdown menu.

  5. Return to Mashable and refresh the page.

That’s it. We’ll take it from here.

Safari on a Mac

  1. Open Safari and visit Mashable.com.

  2. When Safari asks whether you would like to receive notifications from Mashable, select Allow.

  3. If the request doesn’t appear, go to Safari > Settings > Websites > Notifications. Find Mashable and select Allow. You should also make sure Allow websites to ask for permission to send notifications is turned on.

Microsoft Edge

  1. Visit Mashable.com.

  2. Click the site information icon to the left of the URL.

  3. Open Permissions for this site.

  4. Find Notifications and select Allow.

  5. Return to Mashable and refresh the page.

Mozilla Firefox

  1. Visit Mashable.com.

  2. When Firefox asks whether Mashable can send notifications, select Allow.

  3. If you don’t see the prompt, open the Firefox menu and go to Settings > Privacy & Security. Scroll to Permissions, find Notifications, and click Settings. Locate Mashable, change its status to Allow, and save your changes.

Help! I signed up, but I’m not receiving notifications

If you followed the steps above but Mashable alerts remain suspiciously absent, don’t worry. A browser or device setting may be getting in the way.

1. Check your browser settings

Start by returning to Mashable.com and clicking the site information icon beside the URL. Make sure Notifications is set to Allow.

You can also check the notification permissions in your browser’s settings:

  • Chrome: Settings > Privacy and security > Site settings > Notifications

  • Firefox: Settings > Privacy & Security > Permissions > Notifications

  • Safari: Settings > Websites > Notifications

  • Edge: Settings > Cookies and site permissions > Notifications

Find Mashable and confirm that notifications are allowed.

2. Check your device settings

Your browser may have permission to send alerts while your computer is quietly blocking them.

On a Mac, open System Settings > Notifications. Select the browser you used to sign up, turn on Allow notifications, and choose Banners or Alerts as the notification style. On older versions of macOS, you may find these controls under System Preferences.

On a Windows PC, open Settings > System > Notifications. Make sure notifications are turned on for Chrome, Firefox, Edge, or whichever browser you used.

3. Make sure notifications aren’t silenced

Finally, check whether a focus setting has put your alerts on mute.

On a Mac, open Control Center > Focus and make sure Do Not Disturb is turned off.

On Windows 11, go to Settings > System > Notifications and check that Do not disturb is disabled. If you’re using Windows 10, open Focus assist and make sure it is not set to Alarms only.

Once those settings are cleared, Mashable notifications should be free to make their grand entrance.

Want more tech and digital culture news delivered to your inbox daily? Sign up for Mashable’s Top Stories newsletter today.

Barbara Pavone contributed to this article.

#sign #Mashable #push #notifications">How to sign up for Mashable push notifications The internet moves fast. Fortunately, you don’t have to spend all day refreshing your browser to keep up with it.Mashable push notifications deliver our latest news, trending stories, and hottest deals directly to your screen. Here’s how to turn them on in just a few clicks.Google Chrome on AndroidOpen Chrome and visit Mashable.com.Tap the three-dot menu to the right of the address bar.Select Settings, followed by Site settings and Notifications.Make sure notifications are enabled.Return to Mashable. Tap the site information icon to the left of the address bar, select Permissions, and set Notifications to Allow.Google Chrome on a PC or MacVisit Mashable.com.Click the View site information icon to the left of the URL in your address bar.Select Site settings from the menu.Find Notifications and select Allow from the dropdown menu.Return to Mashable and refresh the page.That’s it. We’ll take it from here. Safari on a MacOpen Safari and visit Mashable.com.When Safari asks whether you would like to receive notifications from Mashable, select Allow.If the request doesn’t appear, go to Safari > Settings > Websites > Notifications. Find Mashable and select Allow. You should also make sure Allow websites to ask for permission to send notifications is turned on.Microsoft EdgeVisit Mashable.com.Click the site information icon to the left of the URL.Open Permissions for this site.Find Notifications and select Allow.Return to Mashable and refresh the page.Mozilla FirefoxVisit Mashable.com.When Firefox asks whether Mashable can send notifications, select Allow.If you don’t see the prompt, open the Firefox menu and go to Settings > Privacy & Security. Scroll to Permissions, find Notifications, and click Settings. Locate Mashable, change its status to Allow, and save your changes.Help! I signed up, but I’m not receiving notificationsIf you followed the steps above but Mashable alerts remain suspiciously absent, don’t worry. A browser or device setting may be getting in the way.1. Check your browser settingsStart by returning to Mashable.com and clicking the site information icon beside the URL. Make sure Notifications is set to Allow.You can also check the notification permissions in your browser’s settings:Chrome: Settings > Privacy and security > Site settings > NotificationsFirefox: Settings > Privacy & Security > Permissions > NotificationsSafari: Settings > Websites > NotificationsEdge: Settings > Cookies and site permissions > NotificationsFind Mashable and confirm that notifications are allowed. Mashable Trend Report 2. Check your device settingsYour browser may have permission to send alerts while your computer is quietly blocking them.On a Mac, open System Settings > Notifications. Select the browser you used to sign up, turn on Allow notifications, and choose Banners or Alerts as the notification style. On older versions of macOS, you may find these controls under System Preferences.On a Windows PC, open Settings > System > Notifications. Make sure notifications are turned on for Chrome, Firefox, Edge, or whichever browser you used.3. Make sure notifications aren’t silencedFinally, check whether a focus setting has put your alerts on mute.On a Mac, open Control Center > Focus and make sure Do Not Disturb is turned off.On Windows 11, go to Settings > System > Notifications and check that Do not disturb is disabled. If you’re using Windows 10, open Focus assist and make sure it is not set to Alarms only.Once those settings are cleared, Mashable notifications should be free to make their grand entrance.Want more tech and digital culture news delivered to your inbox daily? Sign up for Mashable’s Top Stories newsletter today.Barbara Pavone contributed to this article. #sign #Mashable #push #notifications

  1. Mashable.com.

  2. Tap the three-dot menu to the right of the address bar.

  3. Select Settings, followed by Site settings and Notifications.

  4. Make sure notifications are enabled.

  5. Return to Mashable. Tap the site information icon to the left of the address bar, select Permissions, and set Notifications to Allow.

Google Chrome on a PC or Mac

  1. Visit Mashable.com.

  2. Click the View site information icon to the left of the URL in your address bar.

  3. Select Site settings from the menu.

  4. Find Notifications and select Allow from the dropdown menu.

  5. Return to Mashable and refresh the page.

That’s it. We’ll take it from here.

Safari on a Mac

  1. Open Safari and visit Mashable.com.

  2. When Safari asks whether you would like to receive notifications from Mashable, select Allow.

  3. If the request doesn’t appear, go to Safari > Settings > Websites > Notifications. Find Mashable and select Allow. You should also make sure Allow websites to ask for permission to send notifications is turned on.

Microsoft Edge

  1. Visit Mashable.com.

  2. Click the site information icon to the left of the URL.

  3. Open Permissions for this site.

  4. Find Notifications and select Allow.

  5. Return to Mashable and refresh the page.

Mozilla Firefox

  1. Visit Mashable.com.

  2. When Firefox asks whether Mashable can send notifications, select Allow.

  3. If you don’t see the prompt, open the Firefox menu and go to Settings > Privacy & Security. Scroll to Permissions, find Notifications, and click Settings. Locate Mashable, change its status to Allow, and save your changes.

Help! I signed up, but I’m not receiving notifications

If you followed the steps above but Mashable alerts remain suspiciously absent, don’t worry. A browser or device setting may be getting in the way.

1. Check your browser settings

Start by returning to Mashable.com and clicking the site information icon beside the URL. Make sure Notifications is set to Allow.

You can also check the notification permissions in your browser’s settings:

  • Chrome: Settings > Privacy and security > Site settings > Notifications

  • Firefox: Settings > Privacy & Security > Permissions > Notifications

  • Safari: Settings > Websites > Notifications

  • Edge: Settings > Cookies and site permissions > Notifications

Find Mashable and confirm that notifications are allowed.

2. Check your device settings

Your browser may have permission to send alerts while your computer is quietly blocking them.

On a Mac, open System Settings > Notifications. Select the browser you used to sign up, turn on Allow notifications, and choose Banners or Alerts as the notification style. On older versions of macOS, you may find these controls under System Preferences.

On a Windows PC, open Settings > System > Notifications. Make sure notifications are turned on for Chrome, Firefox, Edge, or whichever browser you used.

3. Make sure notifications aren’t silenced

Finally, check whether a focus setting has put your alerts on mute.

On a Mac, open Control Center > Focus and make sure Do Not Disturb is turned off.

On Windows 11, go to Settings > System > Notifications and check that Do not disturb is disabled. If you’re using Windows 10, open Focus assist and make sure it is not set to Alarms only.

Once those settings are cleared, Mashable notifications should be free to make their grand entrance.

Want more tech and digital culture news delivered to your inbox daily? Sign up for Mashable’s Top Stories newsletter today.

Barbara Pavone contributed to this article.

#sign #Mashable #push #notifications">How to sign up for Mashable push notifications

The internet moves fast. Fortunately, you don’t have to spend all day refreshing your browser to keep up with it.

Mashable push notifications deliver our latest news, trending stories, and hottest deals directly to your screen. Here’s how to turn them on in just a few clicks.

Google Chrome on Android

  1. Open Chrome and visit Mashable.com.

  2. Tap the three-dot menu to the right of the address bar.

  3. Select Settings, followed by Site settings and Notifications.

  4. Make sure notifications are enabled.

  5. Return to Mashable. Tap the site information icon to the left of the address bar, select Permissions, and set Notifications to Allow.

Google Chrome on a PC or Mac

  1. Visit Mashable.com.

  2. Click the View site information icon to the left of the URL in your address bar.

  3. Select Site settings from the menu.

  4. Find Notifications and select Allow from the dropdown menu.

  5. Return to Mashable and refresh the page.

That’s it. We’ll take it from here.

Safari on a Mac

  1. Open Safari and visit Mashable.com.

  2. When Safari asks whether you would like to receive notifications from Mashable, select Allow.

  3. If the request doesn’t appear, go to Safari > Settings > Websites > Notifications. Find Mashable and select Allow. You should also make sure Allow websites to ask for permission to send notifications is turned on.

Microsoft Edge

  1. Visit Mashable.com.

  2. Click the site information icon to the left of the URL.

  3. Open Permissions for this site.

  4. Find Notifications and select Allow.

  5. Return to Mashable and refresh the page.

Mozilla Firefox

  1. Visit Mashable.com.

  2. When Firefox asks whether Mashable can send notifications, select Allow.

  3. If you don’t see the prompt, open the Firefox menu and go to Settings > Privacy & Security. Scroll to Permissions, find Notifications, and click Settings. Locate Mashable, change its status to Allow, and save your changes.

Help! I signed up, but I’m not receiving notifications

If you followed the steps above but Mashable alerts remain suspiciously absent, don’t worry. A browser or device setting may be getting in the way.

1. Check your browser settings

Start by returning to Mashable.com and clicking the site information icon beside the URL. Make sure Notifications is set to Allow.

You can also check the notification permissions in your browser’s settings:

  • Chrome: Settings > Privacy and security > Site settings > Notifications

  • Firefox: Settings > Privacy & Security > Permissions > Notifications

  • Safari: Settings > Websites > Notifications

  • Edge: Settings > Cookies and site permissions > Notifications

Find Mashable and confirm that notifications are allowed.

2. Check your device settings

Your browser may have permission to send alerts while your computer is quietly blocking them.

On a Mac, open System Settings > Notifications. Select the browser you used to sign up, turn on Allow notifications, and choose Banners or Alerts as the notification style. On older versions of macOS, you may find these controls under System Preferences.

On a Windows PC, open Settings > System > Notifications. Make sure notifications are turned on for Chrome, Firefox, Edge, or whichever browser you used.

3. Make sure notifications aren’t silenced

Finally, check whether a focus setting has put your alerts on mute.

On a Mac, open Control Center > Focus and make sure Do Not Disturb is turned off.

On Windows 11, go to Settings > System > Notifications and check that Do not disturb is disabled. If you’re using Windows 10, open Focus assist and make sure it is not set to Alarms only.

Once those settings are cleared, Mashable notifications should be free to make their grand entrance.

Want more tech and digital culture news delivered to your inbox daily? Sign up for Mashable’s Top Stories newsletter today.

Barbara Pavone contributed to this article.

#sign #Mashable #push #notifications

Samsung’s press release didn’t mention which titles will have support initially, or how many there are, other than including a press image showing off Amazon’s series Ride or Die. The news also comes just after Disney Plus in Europe briefly lost Dolby Vision support due to a patent dispute.

It has similar features to Dolby Vision 2, but without Samsung paying Dolby’s fee for the stamp, and also promises to add “Intelligent Motion Smoothing” that can adjust scene by scene. Hisense, Philips, and TCL have said their new TVs will support Dolby Vision 2, while Peacock and Canal+ are on board for content, but it’s not available for use yet and will likely require a software update for supported TVs when it does start to roll out.

Both formats are promising to make use of motion smoothing when it can benefit the viewing experience on fast-moving action like sports, while also backing off from adding the unsettling “soap opera” effect to film and TV content, but we’ll have to see it in action to know how well it works. The HDR10Plus Advanced FAQ explains more about how its metadata tags can cover both genres (Movie, Sports, Animation, News, or General) and specific details like lighting, motion, or perspective to inform how your TV processes what’s going on.

#Samsungs #HDR10 #Advanced #launching #month #Prime #VideoGadgets,News,Samsung,Streaming,Tech,TVs">Samsung’s HDR10 Plus Advanced is launching this month on Prime VideoAfter previewing HDR10 Plus Advanced late last year, Samsung’s not-Dolby Vision 2 spec will launch globally on Amazon’s Prime Video this month. The first TVs announced with support are Samsung’s 2026 lineup, which will be able to make use of the extra metadata to deliver more precise HDR that is optimized for what you’re watching, and tone mapping that can adjust for specific areas of the screen instead of applying one setting to the whole frame.Samsung’s press release didn’t mention which titles will have support initially, or how many there are, other than including a press image showing off Amazon’s series Ride or Die. The news also comes just after Disney Plus in Europe briefly lost Dolby Vision support due to a patent dispute.It has similar features to Dolby Vision 2, but without Samsung paying Dolby’s fee for the stamp, and also promises to add “Intelligent Motion Smoothing” that can adjust scene by scene. Hisense, Philips, and TCL have said their new TVs will support Dolby Vision 2, while Peacock and Canal+ are on board for content, but it’s not available for use yet and will likely require a software update for supported TVs when it does start to roll out.Both formats are promising to make use of motion smoothing when it can benefit the viewing experience on fast-moving action like sports, while also backing off from adding the unsettling “soap opera” effect to film and TV content, but we’ll have to see it in action to know how well it works. The HDR10Plus Advanced FAQ explains more about how its metadata tags can cover both genres (Movie, Sports, Animation, News, or General) and specific details like lighting, motion, or perspective to inform how your TV processes what’s going on.#Samsungs #HDR10 #Advanced #launching #month #Prime #VideoGadgets,News,Samsung,Streaming,Tech,TVs

last year, Samsung’s not-Dolby Vision 2 spec will launch globally on Amazon’s Prime Video this month. The first TVs announced with support are Samsung’s 2026 lineup, which will be able to make use of the extra metadata to deliver more precise HDR that is optimized for what you’re watching, and tone mapping that can adjust for specific areas of the screen instead of applying one setting to the whole frame.

Samsung’s press release didn’t mention which titles will have support initially, or how many there are, other than including a press image showing off Amazon’s series Ride or Die. The news also comes just after Disney Plus in Europe briefly lost Dolby Vision support due to a patent dispute.

It has similar features to Dolby Vision 2, but without Samsung paying Dolby’s fee for the stamp, and also promises to add “Intelligent Motion Smoothing” that can adjust scene by scene. Hisense, Philips, and TCL have said their new TVs will support Dolby Vision 2, while Peacock and Canal+ are on board for content, but it’s not available for use yet and will likely require a software update for supported TVs when it does start to roll out.

Both formats are promising to make use of motion smoothing when it can benefit the viewing experience on fast-moving action like sports, while also backing off from adding the unsettling “soap opera” effect to film and TV content, but we’ll have to see it in action to know how well it works. The HDR10Plus Advanced FAQ explains more about how its metadata tags can cover both genres (Movie, Sports, Animation, News, or General) and specific details like lighting, motion, or perspective to inform how your TV processes what’s going on.

#Samsungs #HDR10 #Advanced #launching #month #Prime #VideoGadgets,News,Samsung,Streaming,Tech,TVs">Samsung’s HDR10 Plus Advanced is launching this month on Prime Video

After previewing HDR10 Plus Advanced late last year, Samsung’s not-Dolby Vision 2 spec will launch globally on Amazon’s Prime Video this month. The first TVs announced with support are Samsung’s 2026 lineup, which will be able to make use of the extra metadata to deliver more precise HDR that is optimized for what you’re watching, and tone mapping that can adjust for specific areas of the screen instead of applying one setting to the whole frame.

Samsung’s press release didn’t mention which titles will have support initially, or how many there are, other than including a press image showing off Amazon’s series Ride or Die. The news also comes just after Disney Plus in Europe briefly lost Dolby Vision support due to a patent dispute.

It has similar features to Dolby Vision 2, but without Samsung paying Dolby’s fee for the stamp, and also promises to add “Intelligent Motion Smoothing” that can adjust scene by scene. Hisense, Philips, and TCL have said their new TVs will support Dolby Vision 2, while Peacock and Canal+ are on board for content, but it’s not available for use yet and will likely require a software update for supported TVs when it does start to roll out.

Both formats are promising to make use of motion smoothing when it can benefit the viewing experience on fast-moving action like sports, while also backing off from adding the unsettling “soap opera” effect to film and TV content, but we’ll have to see it in action to know how well it works. The HDR10Plus Advanced FAQ explains more about how its metadata tags can cover both genres (Movie, Sports, Animation, News, or General) and specific details like lighting, motion, or perspective to inform how your TV processes what’s going on.

#Samsungs #HDR10 #Advanced #launching #month #Prime #VideoGadgets,News,Samsung,Streaming,Tech,TVs

Post Comment