×
This 6K Monitor Has More to Offer Than Just More Pixels

This 6K Monitor Has More to Offer Than Just More Pixels

The UltraFine 6K is also a Nano IPS Black display, which is something the Asus model is not. Nano IPS Black is actually a combination of two technologies that improve the image quality of IPS in different ways. Nano IPS enhances color coverage, while IPS Black cranks up the contrast. The combination of the two is pretty spectacular, especially on a monitor this sharp. It covers sRGB and AdobeRGB at a full 100 percent, something I’ve never seen on an IPS monitor before. The color accuracy is also incredibly strong. Right out of the box, I measured the average color error at a Delta-E of 0.62. Anything under 1.0 is considered excellent, even for professional color graders. No further calibration needed here.

In terms of brightness, my review unit topped out at 480 nits in standard dynamic range (SDR), which is quite bright. The screen has an anti-reflective, matte coating that deters glare and reflections without dimming the screen too much. This is probably going to bother some people coming from a glossy, older LG 5K display. Although I’d also prefer a glossy display, LG’s solution is subtle enough. And while this is certainly not a proper HDR monitor in that it uses a conventional LED IPS panel, I was able to measure 640 nits of peak brightness in HDR. That’s far from what OLED or mini-LED can do. Remember: The HDR effect is created by higher brightness and contrast. That’s what makes OLED displays attractive. The UltraFine Evo 6K has a 2,000:1 contrast ratio, but I only got 1,720:1 in my testing. That’s still better than the average, though, as monitors like the Dell UltraSharp 32 4K use an enhanced IPS Black in order to push the contrast closer to 3,000:1.

The refresh rate is the one big problem with the UltraFine Evo 6K’s picture. It’s only 60 Hz. It doesn’t matter how sharp, vibrant, and color-accurate your image is if the motion feels stiff. Even fairly affordable monitors like my favorite, the Dell 27 Plus 4K ($300), have a 120-Hz refresh rate. That’s likely not the fault of LG, as Asus’ 6K monitor is also stuck at 60 Hz—but it’s a current limitation of the resolution on offer. I have no doubt that future 6K monitors will come out with a 120-Hz refresh rate, but as of now, that’s a trade-off you’ll be making for the extra pixels.

Pricey Proposition

Photograph: Luke Larsen

The LG UltraFine Evo 6K costs $2,000. While that’s not as much as Apple’s ridiculous Pro Display XDR, it also lacks the HDR capabilities that make that monitor special. The price feels especially egregious when you consider how cheap OLED monitors are getting. Dell’s first nongaming OLED, the Dell 32 Plus QD-OLED, is only $850 and is often on sale for under $700. It’s only 4K, but it’s better for both watching and producing HDR content.

Lastly, if you’re set on 6K, there’s also the Asus ProArt PA32QCV to consider. I haven’t tested it yet, but it’s $600 cheaper than LG’s model, despite using the same 6K panel. What does that extra $700 buy you? A flashier design, for one, but also more up-to-date ports. Although I like where Asus has placed its ports better than LG, it uses old specs such as Thunderbolt 4 and DisplayPort 1.4. The biggest difference is the lack of Nano IPS Black, which means it likely doesn’t have the color performance and contrast of the LG model. These differences aren’t insignificant, but are they worth $700? That’s tough to say, especially since they are otherwise the identical panel. I can’t say for sure until I’ve tested Asus’ model, but on the surface, the LG UltraFine 6K does feel a little overpriced by comparison.

On the other hand, if you’re already dropping this much cash on a 6K monitor, image quality is paramount, and the inclusion of Nano IPS Black makes the LG UltraFine 6K a better alternative to OLED or the Pro Display XDR.

Source link
#Monitor #Offer #Pixels

U.S. federal cybersecurity agency CISA said it did not have a prepared response plan for how it should handle a cybersecurity incident in May, after an investigative reporter notified the agency that a contractor had publicly exposed sensitive keys and credentials for accessing U.S. government systems.

CISA, the Homeland Security unit tasked with defending federal networks and helping to safeguard critical infrastructure, revealed Friday in a postmortem report that its staff “had to spend time building [a playbook] during the early stages of the incident.” The agency said it is important to prepare playbooks for “all anticipated needs” to ensure that organizations are ready to respond in the event of a security incident rather than scrambling to improvise one in real time.

The agency did not say how long the missing playbook delayed CISA’s response, and a spokesperson did not immediately respond to TechCrunch’s request for comment. 

Independent cybersecurity journalist Brian Krebs reported in May that a security researcher with cyber firm GitGuardian alerted him to reams of exposed passwords stored in a publicly accessible GitHub repository, which an employee of a CISA contractor had uploaded.

According to Krebs, the researcher tried to alert the contractor but didn’t hear back. Only after Krebs contacted CISA did the agency take the repository offline and revoke and replace all of the exposed credentials to prevent any potential future abuse.

CISA said that no customer or mission data was exposed in the incident and thanked the researcher and reporter for their help. The agency said that its channels for allowing security researchers to notify CISA of potential incidents “were not well defined,” and that it has made changes to make it easier and faster for researchers to contact the agency.

CISA has been without a permanent director since the start of President Donald Trump’s second term in January 2025. The agency has also been affected by cuts, furloughs, and layoffs affecting about a third of its workforce since Trump took office. 

When you purchase through links in our articles, we may earn a small commission. This doesn’t affect our editorial independence.

#cybersecurity #agency #CISA #build #incident #playbook #incident #agency #reveals #TechCrunchCISA,cybersecurity,us government">US cybersecurity agency CISA had to build its incident playbook during the incident, agency reveals | TechCrunch
U.S. federal cybersecurity agency CISA said it did not have a prepared response plan for how it should handle a cybersecurity incident in May, after an investigative reporter notified the agency that a contractor had publicly exposed sensitive keys and credentials for accessing U.S. government systems.

CISA, the Homeland Security unit tasked with defending federal networks and helping to safeguard critical infrastructure, revealed Friday in a postmortem report that its staff “had to spend time building [a playbook] during the early stages of the incident.” The agency said it is important to prepare playbooks for “all anticipated needs” to ensure that organizations are ready to respond in the event of a security incident rather than scrambling to improvise one in real time.







The agency did not say how long the missing playbook delayed CISA’s response, and a spokesperson did not immediately respond to TechCrunch’s request for comment. 

Independent cybersecurity journalist Brian Krebs reported in May that a security researcher with cyber firm GitGuardian alerted him to reams of exposed passwords stored in a publicly accessible GitHub repository, which an employee of a CISA contractor had uploaded.

According to Krebs, the researcher tried to alert the contractor but didn’t hear back. Only after Krebs contacted CISA did the agency take the repository offline and revoke and replace all of the exposed credentials to prevent any potential future abuse.

CISA said that no customer or mission data was exposed in the incident and thanked the researcher and reporter for their help. The agency said that its channels for allowing security researchers to notify CISA of potential incidents “were not well defined,” and that it has made changes to make it easier and faster for researchers to contact the agency.

CISA has been without a permanent director since the start of President Donald Trump’s second term in January 2025. The agency has also been affected by cuts, furloughs, and layoffs affecting about a third of its workforce since Trump took office. 
When you purchase through links in our articles, we may earn a small commission. This doesn’t affect our editorial independence.#cybersecurity #agency #CISA #build #incident #playbook #incident #agency #reveals #TechCrunchCISA,cybersecurity,us government

in a postmortem report that its staff “had to spend time building [a playbook] during the early stages of the incident.” The agency said it is important to prepare playbooks for “all anticipated needs” to ensure that organizations are ready to respond in the event of a security incident rather than scrambling to improvise one in real time.

The agency did not say how long the missing playbook delayed CISA’s response, and a spokesperson did not immediately respond to TechCrunch’s request for comment. 

Independent cybersecurity journalist Brian Krebs reported in May that a security researcher with cyber firm GitGuardian alerted him to reams of exposed passwords stored in a publicly accessible GitHub repository, which an employee of a CISA contractor had uploaded.

According to Krebs, the researcher tried to alert the contractor but didn’t hear back. Only after Krebs contacted CISA did the agency take the repository offline and revoke and replace all of the exposed credentials to prevent any potential future abuse.

CISA said that no customer or mission data was exposed in the incident and thanked the researcher and reporter for their help. The agency said that its channels for allowing security researchers to notify CISA of potential incidents “were not well defined,” and that it has made changes to make it easier and faster for researchers to contact the agency.

CISA has been without a permanent director since the start of President Donald Trump’s second term in January 2025. The agency has also been affected by cuts, furloughs, and layoffs affecting about a third of its workforce since Trump took office. 

When you purchase through links in our articles, we may earn a small commission. This doesn’t affect our editorial independence.

#cybersecurity #agency #CISA #build #incident #playbook #incident #agency #reveals #TechCrunchCISA,cybersecurity,us government">US cybersecurity agency CISA had to build its incident playbook during the incident, agency reveals | TechCrunch

U.S. federal cybersecurity agency CISA said it did not have a prepared response plan for how it should handle a cybersecurity incident in May, after an investigative reporter notified the agency that a contractor had publicly exposed sensitive keys and credentials for accessing U.S. government systems.

CISA, the Homeland Security unit tasked with defending federal networks and helping to safeguard critical infrastructure, revealed Friday in a postmortem report that its staff “had to spend time building [a playbook] during the early stages of the incident.” The agency said it is important to prepare playbooks for “all anticipated needs” to ensure that organizations are ready to respond in the event of a security incident rather than scrambling to improvise one in real time.

The agency did not say how long the missing playbook delayed CISA’s response, and a spokesperson did not immediately respond to TechCrunch’s request for comment. 

Independent cybersecurity journalist Brian Krebs reported in May that a security researcher with cyber firm GitGuardian alerted him to reams of exposed passwords stored in a publicly accessible GitHub repository, which an employee of a CISA contractor had uploaded.

According to Krebs, the researcher tried to alert the contractor but didn’t hear back. Only after Krebs contacted CISA did the agency take the repository offline and revoke and replace all of the exposed credentials to prevent any potential future abuse.

CISA said that no customer or mission data was exposed in the incident and thanked the researcher and reporter for their help. The agency said that its channels for allowing security researchers to notify CISA of potential incidents “were not well defined,” and that it has made changes to make it easier and faster for researchers to contact the agency.

CISA has been without a permanent director since the start of President Donald Trump’s second term in January 2025. The agency has also been affected by cuts, furloughs, and layoffs affecting about a third of its workforce since Trump took office. 

When you purchase through links in our articles, we may earn a small commission. This doesn’t affect our editorial independence.

#cybersecurity #agency #CISA #build #incident #playbook #incident #agency #reveals #TechCrunchCISA,cybersecurity,us government
Power supplies aren’t exactly the most exciting PC component to talk about. But considering how expensive modern graphics cards have become, and the issues we’ve seen with melting 12V-2×6 connectors over the past few years, it’s probably one of the few components you don’t want to cheap out on. That’s why GIGABYTE’s new GAMING Series power supplies are interesting. The company has introduced a new feature called T-Guard, which actively monitors the temperature of the GPU power connector and steps in before things get out of hand.

T-Guard Monitors Your GPU Power Cable in Real Time

The biggest highlight of the new PSU lineup is T-Guard, an active safety system designed specifically for the newer 12V-2×6 graphics card connector. Instead of waiting for something to go wrong, the PSU continuously monitors the connector using built-in temperature sensors. If it detects abnormal heat, which can occur due to a loose cable or excessive electrical load, it immediately alerts the system and begins protecting the hardware.

Rather than shutting down the entire PC instantly, the PSU intelligently reduces power only to the graphics card. That means the rest of the system can continue running normally, giving users enough time to save any unsaved work before safely powering the machine off. If your processor has integrated graphics, you’ll still get video output even after the GPU power has been limited, making it much easier to troubleshoot the issue rather than staring at a black screen.

Combined with real-time temperature monitoring, automatic GPU power limiting, and the ability to recover your work before shutdown, GIGABYTE says T-Guard offers three layers of protection against connector failures.

Built for Modern Gaming PCs

GIGABYTE Launches New Gaming PSUs That Can Detect GPU Cable Overheating
	
Power supplies aren’t exactly the most exciting PC component to talk about. But considering how expensive modern graphics cards have become, and the issues we’ve seen with melting 12V-2×6 connectors over the past few years, it’s probably one of the few components you don’t want to cheap out on. That’s why GIGABYTE’s new GAMING Series power supplies are interesting. The company has introduced a new feature called T-Guard, which actively monitors the temperature of the GPU power connector and steps in before things get out of hand.



T-Guard Monitors Your GPU Power Cable in Real Time



The biggest highlight of the new PSU lineup is T-Guard, an active safety system designed specifically for the newer 12V-2×6 graphics card connector. Instead of waiting for something to go wrong, the PSU continuously monitors the connector using built-in temperature sensors. If it detects abnormal heat, which can occur due to a loose cable or excessive electrical load, it immediately alerts the system and begins protecting the hardware.



Rather than shutting down the entire PC instantly, the PSU intelligently reduces power only to the graphics card. That means the rest of the system can continue running normally, giving users enough time to save any unsaved work before safely powering the machine off. If your processor has integrated graphics, you’ll still get video output even after the GPU power has been limited, making it much easier to troubleshoot the issue rather than staring at a black screen.



Combined with real-time temperature monitoring, automatic GPU power limiting, and the ability to recover your work before shutdown, GIGABYTE says T-Guard offers three layers of protection against connector failures.



Built for Modern Gaming PCs







Beyond the new safety features, the GAMING Series also ticks most of the boxes you’d expect from a modern enthusiast power supply. The units are fully compliant with the latest ATX 3.1 and PCIe 5.1 standards, making them ready for current and upcoming graphics cards. They’re available in 750W, 850W, and 1000W capacities and come in both Black and Ice color options to better match different PC builds. Internally, GIGABYTE uses 100% Japanese capacitors, while the included dual-color 12V-2×6 cable makes it easier to confirm that the GPU connector has been plugged in correctly before powering on the system.



GIGABYTE has also focused on efficiency and acoustics with the new lineup. The PSUs have received Cybenetics ETA Platinum certification for energy efficiency and the Cybenetics LAMBDA A+ certification for low noise. According to the company, average operating noise stays below 20 dB(A) under typical workloads. Cooling duties are handled by a 135mm Fluid Dynamic Bearing fan, while HybridCool technology can completely stop the fan during lighter workloads. This allows the PSU to operate almost silently when the system isn’t under heavy load.

#GIGABYTE #Launches #Gaming #PSUs #Detect #GPU #Cable #OverheatingGigaByte

Beyond the new safety features, the GAMING Series also ticks most of the boxes you’d expect from a modern enthusiast power supply. The units are fully compliant with the latest ATX 3.1 and PCIe 5.1 standards, making them ready for current and upcoming graphics cards. They’re available in 750W, 850W, and 1000W capacities and come in both Black and Ice color options to better match different PC builds. Internally, GIGABYTE uses 100% Japanese capacitors, while the included dual-color 12V-2×6 cable makes it easier to confirm that the GPU connector has been plugged in correctly before powering on the system.

GIGABYTE has also focused on efficiency and acoustics with the new lineup. The PSUs have received Cybenetics ETA Platinum certification for energy efficiency and the Cybenetics LAMBDA A+ certification for low noise. According to the company, average operating noise stays below 20 dB(A) under typical workloads. Cooling duties are handled by a 135mm Fluid Dynamic Bearing fan, while HybridCool technology can completely stop the fan during lighter workloads. This allows the PSU to operate almost silently when the system isn’t under heavy load.

#GIGABYTE #Launches #Gaming #PSUs #Detect #GPU #Cable #OverheatingGigaByte">GIGABYTE Launches New Gaming PSUs That Can Detect GPU Cable Overheating
	
Power supplies aren’t exactly the most exciting PC component to talk about. But considering how expensive modern graphics cards have become, and the issues we’ve seen with melting 12V-2×6 connectors over the past few years, it’s probably one of the few components you don’t want to cheap out on. That’s why GIGABYTE’s new GAMING Series power supplies are interesting. The company has introduced a new feature called T-Guard, which actively monitors the temperature of the GPU power connector and steps in before things get out of hand.



T-Guard Monitors Your GPU Power Cable in Real Time



The biggest highlight of the new PSU lineup is T-Guard, an active safety system designed specifically for the newer 12V-2×6 graphics card connector. Instead of waiting for something to go wrong, the PSU continuously monitors the connector using built-in temperature sensors. If it detects abnormal heat, which can occur due to a loose cable or excessive electrical load, it immediately alerts the system and begins protecting the hardware.



Rather than shutting down the entire PC instantly, the PSU intelligently reduces power only to the graphics card. That means the rest of the system can continue running normally, giving users enough time to save any unsaved work before safely powering the machine off. If your processor has integrated graphics, you’ll still get video output even after the GPU power has been limited, making it much easier to troubleshoot the issue rather than staring at a black screen.



Combined with real-time temperature monitoring, automatic GPU power limiting, and the ability to recover your work before shutdown, GIGABYTE says T-Guard offers three layers of protection against connector failures.



Built for Modern Gaming PCs







Beyond the new safety features, the GAMING Series also ticks most of the boxes you’d expect from a modern enthusiast power supply. The units are fully compliant with the latest ATX 3.1 and PCIe 5.1 standards, making them ready for current and upcoming graphics cards. They’re available in 750W, 850W, and 1000W capacities and come in both Black and Ice color options to better match different PC builds. Internally, GIGABYTE uses 100% Japanese capacitors, while the included dual-color 12V-2×6 cable makes it easier to confirm that the GPU connector has been plugged in correctly before powering on the system.



GIGABYTE has also focused on efficiency and acoustics with the new lineup. The PSUs have received Cybenetics ETA Platinum certification for energy efficiency and the Cybenetics LAMBDA A+ certification for low noise. According to the company, average operating noise stays below 20 dB(A) under typical workloads. Cooling duties are handled by a 135mm Fluid Dynamic Bearing fan, while HybridCool technology can completely stop the fan during lighter workloads. This allows the PSU to operate almost silently when the system isn’t under heavy load.

#GIGABYTE #Launches #Gaming #PSUs #Detect #GPU #Cable #OverheatingGigaByte

aren’t exactly the most exciting PC component to talk about. But considering how expensive modern graphics cards have become, and the issues we’ve seen with melting 12V-2×6 connectors over the past few years, it’s probably one of the few components you don’t want to cheap out on. That’s why GIGABYTE’s new GAMING Series power supplies are interesting. The company has introduced a new feature called T-Guard, which actively monitors the temperature of the GPU power connector and steps in before things get out of hand.

T-Guard Monitors Your GPU Power Cable in Real Time

The biggest highlight of the new PSU lineup is T-Guard, an active safety system designed specifically for the newer 12V-2×6 graphics card connector. Instead of waiting for something to go wrong, the PSU continuously monitors the connector using built-in temperature sensors. If it detects abnormal heat, which can occur due to a loose cable or excessive electrical load, it immediately alerts the system and begins protecting the hardware.

Rather than shutting down the entire PC instantly, the PSU intelligently reduces power only to the graphics card. That means the rest of the system can continue running normally, giving users enough time to save any unsaved work before safely powering the machine off. If your processor has integrated graphics, you’ll still get video output even after the GPU power has been limited, making it much easier to troubleshoot the issue rather than staring at a black screen.

Combined with real-time temperature monitoring, automatic GPU power limiting, and the ability to recover your work before shutdown, GIGABYTE says T-Guard offers three layers of protection against connector failures.

Built for Modern Gaming PCs

GIGABYTE Launches New Gaming PSUs That Can Detect GPU Cable Overheating
	
Power supplies aren’t exactly the most exciting PC component to talk about. But considering how expensive modern graphics cards have become, and the issues we’ve seen with melting 12V-2×6 connectors over the past few years, it’s probably one of the few components you don’t want to cheap out on. That’s why GIGABYTE’s new GAMING Series power supplies are interesting. The company has introduced a new feature called T-Guard, which actively monitors the temperature of the GPU power connector and steps in before things get out of hand.



T-Guard Monitors Your GPU Power Cable in Real Time



The biggest highlight of the new PSU lineup is T-Guard, an active safety system designed specifically for the newer 12V-2×6 graphics card connector. Instead of waiting for something to go wrong, the PSU continuously monitors the connector using built-in temperature sensors. If it detects abnormal heat, which can occur due to a loose cable or excessive electrical load, it immediately alerts the system and begins protecting the hardware.



Rather than shutting down the entire PC instantly, the PSU intelligently reduces power only to the graphics card. That means the rest of the system can continue running normally, giving users enough time to save any unsaved work before safely powering the machine off. If your processor has integrated graphics, you’ll still get video output even after the GPU power has been limited, making it much easier to troubleshoot the issue rather than staring at a black screen.



Combined with real-time temperature monitoring, automatic GPU power limiting, and the ability to recover your work before shutdown, GIGABYTE says T-Guard offers three layers of protection against connector failures.



Built for Modern Gaming PCs







Beyond the new safety features, the GAMING Series also ticks most of the boxes you’d expect from a modern enthusiast power supply. The units are fully compliant with the latest ATX 3.1 and PCIe 5.1 standards, making them ready for current and upcoming graphics cards. They’re available in 750W, 850W, and 1000W capacities and come in both Black and Ice color options to better match different PC builds. Internally, GIGABYTE uses 100% Japanese capacitors, while the included dual-color 12V-2×6 cable makes it easier to confirm that the GPU connector has been plugged in correctly before powering on the system.



GIGABYTE has also focused on efficiency and acoustics with the new lineup. The PSUs have received Cybenetics ETA Platinum certification for energy efficiency and the Cybenetics LAMBDA A+ certification for low noise. According to the company, average operating noise stays below 20 dB(A) under typical workloads. Cooling duties are handled by a 135mm Fluid Dynamic Bearing fan, while HybridCool technology can completely stop the fan during lighter workloads. This allows the PSU to operate almost silently when the system isn’t under heavy load.

#GIGABYTE #Launches #Gaming #PSUs #Detect #GPU #Cable #OverheatingGigaByte

Beyond the new safety features, the GAMING Series also ticks most of the boxes you’d expect from a modern enthusiast power supply. The units are fully compliant with the latest ATX 3.1 and PCIe 5.1 standards, making them ready for current and upcoming graphics cards. They’re available in 750W, 850W, and 1000W capacities and come in both Black and Ice color options to better match different PC builds. Internally, GIGABYTE uses 100% Japanese capacitors, while the included dual-color 12V-2×6 cable makes it easier to confirm that the GPU connector has been plugged in correctly before powering on the system.

GIGABYTE has also focused on efficiency and acoustics with the new lineup. The PSUs have received Cybenetics ETA Platinum certification for energy efficiency and the Cybenetics LAMBDA A+ certification for low noise. According to the company, average operating noise stays below 20 dB(A) under typical workloads. Cooling duties are handled by a 135mm Fluid Dynamic Bearing fan, while HybridCool technology can completely stop the fan during lighter workloads. This allows the PSU to operate almost silently when the system isn’t under heavy load.

#GIGABYTE #Launches #Gaming #PSUs #Detect #GPU #Cable #OverheatingGigaByte">GIGABYTE Launches New Gaming PSUs That Can Detect GPU Cable Overheating

Power supplies aren’t exactly the most exciting PC component to talk about. But considering how expensive modern graphics cards have become, and the issues we’ve seen with melting 12V-2×6 connectors over the past few years, it’s probably one of the few components you don’t want to cheap out on. That’s why GIGABYTE’s new GAMING Series power supplies are interesting. The company has introduced a new feature called T-Guard, which actively monitors the temperature of the GPU power connector and steps in before things get out of hand.

T-Guard Monitors Your GPU Power Cable in Real Time

The biggest highlight of the new PSU lineup is T-Guard, an active safety system designed specifically for the newer 12V-2×6 graphics card connector. Instead of waiting for something to go wrong, the PSU continuously monitors the connector using built-in temperature sensors. If it detects abnormal heat, which can occur due to a loose cable or excessive electrical load, it immediately alerts the system and begins protecting the hardware.

Rather than shutting down the entire PC instantly, the PSU intelligently reduces power only to the graphics card. That means the rest of the system can continue running normally, giving users enough time to save any unsaved work before safely powering the machine off. If your processor has integrated graphics, you’ll still get video output even after the GPU power has been limited, making it much easier to troubleshoot the issue rather than staring at a black screen.

Combined with real-time temperature monitoring, automatic GPU power limiting, and the ability to recover your work before shutdown, GIGABYTE says T-Guard offers three layers of protection against connector failures.

Built for Modern Gaming PCs

GIGABYTE Launches New Gaming PSUs That Can Detect GPU Cable Overheating
	
Power supplies aren’t exactly the most exciting PC component to talk about. But considering how expensive modern graphics cards have become, and the issues we’ve seen with melting 12V-2×6 connectors over the past few years, it’s probably one of the few components you don’t want to cheap out on. That’s why GIGABYTE’s new GAMING Series power supplies are interesting. The company has introduced a new feature called T-Guard, which actively monitors the temperature of the GPU power connector and steps in before things get out of hand.



T-Guard Monitors Your GPU Power Cable in Real Time



The biggest highlight of the new PSU lineup is T-Guard, an active safety system designed specifically for the newer 12V-2×6 graphics card connector. Instead of waiting for something to go wrong, the PSU continuously monitors the connector using built-in temperature sensors. If it detects abnormal heat, which can occur due to a loose cable or excessive electrical load, it immediately alerts the system and begins protecting the hardware.



Rather than shutting down the entire PC instantly, the PSU intelligently reduces power only to the graphics card. That means the rest of the system can continue running normally, giving users enough time to save any unsaved work before safely powering the machine off. If your processor has integrated graphics, you’ll still get video output even after the GPU power has been limited, making it much easier to troubleshoot the issue rather than staring at a black screen.



Combined with real-time temperature monitoring, automatic GPU power limiting, and the ability to recover your work before shutdown, GIGABYTE says T-Guard offers three layers of protection against connector failures.



Built for Modern Gaming PCs







Beyond the new safety features, the GAMING Series also ticks most of the boxes you’d expect from a modern enthusiast power supply. The units are fully compliant with the latest ATX 3.1 and PCIe 5.1 standards, making them ready for current and upcoming graphics cards. They’re available in 750W, 850W, and 1000W capacities and come in both Black and Ice color options to better match different PC builds. Internally, GIGABYTE uses 100% Japanese capacitors, while the included dual-color 12V-2×6 cable makes it easier to confirm that the GPU connector has been plugged in correctly before powering on the system.



GIGABYTE has also focused on efficiency and acoustics with the new lineup. The PSUs have received Cybenetics ETA Platinum certification for energy efficiency and the Cybenetics LAMBDA A+ certification for low noise. According to the company, average operating noise stays below 20 dB(A) under typical workloads. Cooling duties are handled by a 135mm Fluid Dynamic Bearing fan, while HybridCool technology can completely stop the fan during lighter workloads. This allows the PSU to operate almost silently when the system isn’t under heavy load.

#GIGABYTE #Launches #Gaming #PSUs #Detect #GPU #Cable #OverheatingGigaByte

Beyond the new safety features, the GAMING Series also ticks most of the boxes you’d expect from a modern enthusiast power supply. The units are fully compliant with the latest ATX 3.1 and PCIe 5.1 standards, making them ready for current and upcoming graphics cards. They’re available in 750W, 850W, and 1000W capacities and come in both Black and Ice color options to better match different PC builds. Internally, GIGABYTE uses 100% Japanese capacitors, while the included dual-color 12V-2×6 cable makes it easier to confirm that the GPU connector has been plugged in correctly before powering on the system.

GIGABYTE has also focused on efficiency and acoustics with the new lineup. The PSUs have received Cybenetics ETA Platinum certification for energy efficiency and the Cybenetics LAMBDA A+ certification for low noise. According to the company, average operating noise stays below 20 dB(A) under typical workloads. Cooling duties are handled by a 135mm Fluid Dynamic Bearing fan, while HybridCool technology can completely stop the fan during lighter workloads. This allows the PSU to operate almost silently when the system isn’t under heavy load.

#GIGABYTE #Launches #Gaming #PSUs #Detect #GPU #Cable #OverheatingGigaByte

Post Comment