×
The 2027 Chevy Bolt is the McRib of the automotive world | TechCrunch

The 2027 Chevy Bolt is the McRib of the automotive world | TechCrunch

Few products attract a cult-like obsession like this one. Even after being off the menu for years, true fans yearn for its return, their devotion bordering on an almost cult-like obsession. Well, they’re in luck. It’s back for a limited time only.

It’s not the McRib, but the 2027 Chevrolet Bolt.

Like McDonald’s McRib, there are a few theories that might explain the Bolt’s reappearance. 

GM’s electric vehicle parts bin has grown since the previous Bolt was introduced in 2016, helping the new model’s finances pencil out, just like how the McRib’s sporadic availability might be explained by low pork prices. It also doesn’t hurt that many Bolt owners, like McRib aficionados, are rabid fans, including some inside GM. The reality can probably be found somewhere in between.

When the company realized it had an 18-month production gap at its factory in Fairfax, Kansas, executives signed off on the little EVs revival.

Unlike the McRib, the new Bolt doesn’t rigidly adhere to the original recipe. But there is enough that’s familiar in the new model to please its die-hard fans. TechCrunch got an up close look and test drive of the upcoming Chevy Bolt during a recent press trip, which GM provided the travel and accommodations for. 

Something old, something new

Image Credits:Tim De Chant

GM started with the chassis and the body panels from the Bolt EUV — a subtly puffed up version of the old Bolt — and redesigned the front and rear bits. It tweaked the suspension and some of the front chassis, but by and large it’s the same basic metal. 

Techcrunch event

San Francisco, CA
|
October 13-15, 2026

Some of the plastic inside has been refined, though there’s still enough hard surfaces to remind you that this is the cheapest EV for sale in the U.S. today. Prices start at $28,995 including the destination fee, which is a good deal considering the state of the car market. Don’t get too excited, though, because a loaded Bolt can cost more than $40,000, at which point the warm fuzzies start to fade.

What’s missing? Most drivers will notice the absence of CarPlay and Android Auto, which is now missing from all new GM vehicles. The previous Bolt was one of GM’s only EVs with screencasting, and its omission is likely to cause more than a few gripes among current owners. To ease the pain, they’ve added Spotify and Apple Music apps. They help, but only a bit — the native apps were less responsive to my inputs than their CarPlay cousins.

There were also revisions to the headlights and taillights; but the stars of the show are the battery, the motor, and Super Cruise.

The new 65 kilowatt-hour battery is GM’s first to use lithium-iron-phosphate (LFP). Power from it flows through a new battery management system to an electric motor plucked from the front-wheel drive Chevy Equinox.

The battery swap is significant. For years, American automakers have had their sights set on LFP. The chemistry eliminates critical minerals like cobalt and nickel, slashing the cost. LFP batteries also don’t suffer from degradation when being charged repeatedly to 100%. Previous Bolt owners were encouraged to limit their daily charging to 80%, reserving the last fraction for road trips. (That’s even before battery fires sparked a recall that forced owners to do so for an extended period of time.)

LFP cells also discharge pretty consistently, maintaining full power closer to 0% state of charge than before.

In the new Bolt, the motor makes 200 horsepower and 169 pound-feet of torque. The latter is down a bit from the previous model, but it feels peppy enough around town. 

Kris Keary, chief engineer for EV propulsion systems, told me that’s because the new motor can spin faster and more efficiently, allowing the team to spec shorter gearing. At the wheels, torque is actually a little higher, meaning that Chevy expects the new Bolt to travel from zero to 60 mph a touch faster than before.

Longer range

Image Credits:Tim De Chant

Between the new motor and the more efficient power electronics, Chevy was able to find an additional 15 miles of range, Keary said. Even with the smaller battery, it can travel farther, a total of 262 miles for the lower-spec LT. (Higher spec RS models should travel 255 miles.)

The power electronics also mitigate an issue previous owners had with the car: charging speed. Though the previous Bolt produced road trip-worthy range figures, its charging speed was far from inspiring at 50 kW. Adding 200 miles of range took about an hour or so.

Now, charging from 10% to 90% should take 24 minutes, according to GM. The 400-volt pack can accept up to 150 kW, though one person on the press drive I attended briefly saw 157 kW at a Tesla Supercharger. (Yes, the Bolt is now equipped with the North American Charging Standard (NACS), though plug-and-charge on the Tesla network is coming later this year.) I wasn’t quite so lucky, seeing just 115 kW in ideal 70˚ F weather. My total charge time was 24 minutes from 24% to 80%. Not quite what Chevy was hoping for, but not bad either.

Faster charging paired with Super Cruise means this little fella has the potential to be a decent road tripper or commuter car. Front and back seats are roomy and comfortable enough, though there’s zero toe room under the front seats. The trunk is decently sized for a subcompact, but it won’t fit more than a few carry-on bags. 

Image Credits:Tim De Chant

Super Cruiser

As Chevy representatives continually reminded us, the Bolt is the cheapest hands-free vehicle on the market today, though you’ll want to double check the menu because it requires a very specific order — “LT + Comfort + Evotex + Tech + Super Cruise.” Cheap is a relative term these days, of course. It will still set you back $35,655.

To test Super Cruise, I ran a short 14-mile loop up and down the 101 northwest of Los Angeles. The Level 2 ADAS system handled midafternoon traffic well, automatically changing lanes when I approached a slow-moving vehicle. I didn’t even have to look at the mirror to confirm, which BMW requires, for example. But Super Cruise will buzz your left or right glute to give you a heads up. Oh, hey now! What’s that! Oh, lane change incoming.

As before, Super Cruise will only work on routes GM has mapped, which includes freeways and some two-lane highways. If your route requires an exit or interchange, it’ll do its best to get you into the necessary lane before asking you to take over. On my drive, it became flustered a few times by cars coming up fast in a lane to the right of the car, aborting the move. I found it more aggressive when it wanted to find the passing lane. (You can always nudge it to change lanes by hitting the turn signal.)

chevy-bolt-headlight
Image Credits:Tim De Chant

This is the point where Chevy defends its decision to eliminate screencasting tools like CarPlay and Android Auto from its vehicles. The Bolt’s Android Automotive-based infotainment system is shared with other GM EVs. That means its navigation system can talk to the battery management system, warming the battery up before fast charging, and Super Cruise, allowing the Bolt to perform its lane changing magic as it approaches your exit.

Super Cruise will still cost you. Because Chevy requires a lot of options before you can get hands free driving, the feature adds more than 20% to the base price, requiring owners to shell out $35,655. Is it worth another $6,600, plus the cost of OnStar after the three-year trial expires? Depends on how often you think you’ll use it. For long-haul commuters, the addition could be the stress-reducer that adds a few years to their life expectancy. Everyone else? Probably not.

I’d wager that most new Bolt buyers already know they’re going to buy a Bolt. They either have one parked in their garage or have a soft spot for small EVs. 

Chevy is betting there’s enough of them that it’ll sell out after about two years. After that, the automaker won’t commit to another run. But who knows? Absence makes the heart grow fonder. Just ask any McRib fan.

Source link
#Chevy #Bolt #McRib #automotive #world #TechCrunch


Johannes Heidecke, the Head of Safety Systems at OpenAI, is leaving. I know what you’re thinking: Hey, didn’t the head of safety at OpenAI just leave?

In fact, it feels like a head of safety at OpenAI is pretty much always leaving. Working in safety leadership—loosely defined—at OpenAI is a little like working as a drummer in the band Spinal Tap; lots of turnover. I’m not the world’s premier OpenAI Kremlinologist, so I might be missing some details and nuance, but here’s my basic timeline:

According to Wired, those previously reporting to Heidecke’s safety teams will be led by Mia Glaese, who is a VP, and also the head of alignment. However, there does seem to be an other replacement for Heidecke, according to Wired. Saachi Jain, former leader of safety teams, will now be an “interim head of safety systems” under Glaese.

What exactly keeps happening inside OpenAI’s offices is anyone’s guess, but OpenAI research chief Mark Chen did at least give Wired a hint, saying, “The demands on safety continue to increase—we are training models at a much faster cadence, and release cycles have come down greatly in turn,” and added, “As a result, we have bigger coordination challenges around safety today than ever before.”

The generous reading is that this is still an immature industry. The points along the chain where safety considerations are needed genuinely may keep jumping around as OpenAI figures out how best to build its products. Perhaps today’s sensible safety test procedure is tomorrow’s unnecessary bottleneck.

And there’s no actual direct evidence for a less generous reading of Heidecke’s departure—for instance, one in which any such consideration is a post-hoc rationalization for a pruning of safety procedures in service of faster product rollouts.

#Safety #Leader #OpenAI #Leftai alignment,AI safety,OpenAI">Yet Another Safety Leader at OpenAI Has Left
                Johannes Heidecke, the Head of Safety Systems at OpenAI, is leaving. I know what you’re thinking: Hey, didn’t the head of safety at OpenAI just leave? In fact, it feels like a head of safety at OpenAI is pretty much always leaving. Working in safety leadership—loosely defined—at OpenAI is a little like working as a drummer in the band Spinal Tap; lots of turnover. I’m not the world’s premier OpenAI Kremlinologist, so I might be missing some details and nuance, but here’s my basic timeline:  According to Wired, those previously reporting to Heidecke’s safety teams will be led by Mia Glaese, who is a VP, and also the head of alignment. However, there does seem to be an other replacement for Heidecke, according to Wired. Saachi Jain, former leader of safety teams, will now be an “interim head of safety systems” under Glaese. What exactly keeps happening inside OpenAI’s offices is anyone’s guess, but OpenAI research chief Mark Chen did at least give Wired a hint, saying, “The demands on safety continue to increase—we are training models at a much faster cadence, and release cycles have come down greatly in turn,” and added, “As a result, we have bigger coordination challenges around safety today than ever before.”

 The generous reading is that this is still an immature industry. The points along the chain where safety considerations are needed genuinely may keep jumping around as OpenAI figures out how best to build its products. Perhaps today’s sensible safety test procedure is tomorrow’s unnecessary bottleneck.

 And there’s no actual direct evidence for a less generous reading of Heidecke’s departure—for instance, one in which any such consideration is a post-hoc rationalization for a pruning of safety procedures in service of faster product rollouts.      #Safety #Leader #OpenAI #Leftai alignment,AI safety,OpenAI

working as a drummer in the band Spinal Tap; lots of turnover. I’m not the world’s premier OpenAI Kremlinologist, so I might be missing some details and nuance, but here’s my basic timeline:

According to Wired, those previously reporting to Heidecke’s safety teams will be led by Mia Glaese, who is a VP, and also the head of alignment. However, there does seem to be an other replacement for Heidecke, according to Wired. Saachi Jain, former leader of safety teams, will now be an “interim head of safety systems” under Glaese.

What exactly keeps happening inside OpenAI’s offices is anyone’s guess, but OpenAI research chief Mark Chen did at least give Wired a hint, saying, “The demands on safety continue to increase—we are training models at a much faster cadence, and release cycles have come down greatly in turn,” and added, “As a result, we have bigger coordination challenges around safety today than ever before.”

The generous reading is that this is still an immature industry. The points along the chain where safety considerations are needed genuinely may keep jumping around as OpenAI figures out how best to build its products. Perhaps today’s sensible safety test procedure is tomorrow’s unnecessary bottleneck.

And there’s no actual direct evidence for a less generous reading of Heidecke’s departure—for instance, one in which any such consideration is a post-hoc rationalization for a pruning of safety procedures in service of faster product rollouts.

#Safety #Leader #OpenAI #Leftai alignment,AI safety,OpenAI">Yet Another Safety Leader at OpenAI Has LeftYet Another Safety Leader at OpenAI Has Left
                Johannes Heidecke, the Head of Safety Systems at OpenAI, is leaving. I know what you’re thinking: Hey, didn’t the head of safety at OpenAI just leave? In fact, it feels like a head of safety at OpenAI is pretty much always leaving. Working in safety leadership—loosely defined—at OpenAI is a little like working as a drummer in the band Spinal Tap; lots of turnover. I’m not the world’s premier OpenAI Kremlinologist, so I might be missing some details and nuance, but here’s my basic timeline:  According to Wired, those previously reporting to Heidecke’s safety teams will be led by Mia Glaese, who is a VP, and also the head of alignment. However, there does seem to be an other replacement for Heidecke, according to Wired. Saachi Jain, former leader of safety teams, will now be an “interim head of safety systems” under Glaese. What exactly keeps happening inside OpenAI’s offices is anyone’s guess, but OpenAI research chief Mark Chen did at least give Wired a hint, saying, “The demands on safety continue to increase—we are training models at a much faster cadence, and release cycles have come down greatly in turn,” and added, “As a result, we have bigger coordination challenges around safety today than ever before.”

 The generous reading is that this is still an immature industry. The points along the chain where safety considerations are needed genuinely may keep jumping around as OpenAI figures out how best to build its products. Perhaps today’s sensible safety test procedure is tomorrow’s unnecessary bottleneck.

 And there’s no actual direct evidence for a less generous reading of Heidecke’s departure—for instance, one in which any such consideration is a post-hoc rationalization for a pruning of safety procedures in service of faster product rollouts.      #Safety #Leader #OpenAI #Leftai alignment,AI safety,OpenAI

Johannes Heidecke, the Head of Safety Systems at OpenAI, is leaving. I know what you’re thinking: Hey, didn’t the head of safety at OpenAI just leave?

In fact, it feels like a head of safety at OpenAI is pretty much always leaving. Working in safety leadership—loosely defined—at OpenAI is a little like working as a drummer in the band Spinal Tap; lots of turnover. I’m not the world’s premier OpenAI Kremlinologist, so I might be missing some details and nuance, but here’s my basic timeline:

According to Wired, those previously reporting to Heidecke’s safety teams will be led by Mia Glaese, who is a VP, and also the head of alignment. However, there does seem to be an other replacement for Heidecke, according to Wired. Saachi Jain, former leader of safety teams, will now be an “interim head of safety systems” under Glaese.

What exactly keeps happening inside OpenAI’s offices is anyone’s guess, but OpenAI research chief Mark Chen did at least give Wired a hint, saying, “The demands on safety continue to increase—we are training models at a much faster cadence, and release cycles have come down greatly in turn,” and added, “As a result, we have bigger coordination challenges around safety today than ever before.”

The generous reading is that this is still an immature industry. The points along the chain where safety considerations are needed genuinely may keep jumping around as OpenAI figures out how best to build its products. Perhaps today’s sensible safety test procedure is tomorrow’s unnecessary bottleneck.

And there’s no actual direct evidence for a less generous reading of Heidecke’s departure—for instance, one in which any such consideration is a post-hoc rationalization for a pruning of safety procedures in service of faster product rollouts.

#Safety #Leader #OpenAI #Leftai alignment,AI safety,OpenAI

Image may contain Adapter Electronics Escooter Transportation and Vehicle

Photograph: Chris Null

Naturally, the AstroRinse also needs a power supply, so if you don’t have a standard electrical outlet near your hose spigot, you’ll need another extension cord solution here. The unit must be level to run properly, and it features adjustable feet and a built-in spirit level to help you achieve that.

All told, you’ll need to carefully consider where you’re going to place the AstroRinse, ensuring you have access to water, power, and drainage—and that the location isn’t too far from the pool. Since the AquaSense X robot itself weighs 29 pounds (and more when freshly pulled from the water), you probably don’t want to haul the thing halfway across the yard to clean and charge it. Unfortunately, given the availability of the above three services in my backyard, that’s exactly what I had to do.

A Familiar Friend in the Water

The Beatbot AquaSense X robot is nearly identical in appearance to the Beatbot AquaSense 2 Ultra except for some changes to the basket design (which is a single piece here instead of two). Setting it up is far simpler than the AstroRinse.

Physical configuration involves installing two side brushes—these are used only by the skimmer function—but this is a fairly quick affair. Once the brushes are attached, the robot must be set on top of the AstroRinse cleaner so the two devices can be wirelessly paired together. (The quick start guide lays out the particular button presses you must do to complete this process; don’t lose it.) Lastly, the system must then be paired to the Beatbot mobile app; you’ll need Bluetooth and a 2.4 GHz or 5 GHz Wi-Fi connection to complete this task. One tiny hiccup I encountered: After completing all this work, both devices downloaded firmware updates, which promptly broke their pairing connection. It was easy to reestablish, however, by simply repeating the pairing process.

Video: Chris Null

After a full charge, I put the cleaner through its paces in the pool on both the floor and the surface, and as expected, I saw no real difference in performance against the AquaSense 2 Ultra. During floor testing with both organic and synthetic debris, the device picked up an average of 97 percent of the test material, doing exceptionally well on steps and platforms. On the surface, the unit was predictably middling to awful, collecting less than half of floating debris and sinking most of the rest. The unit is just too slow to collect much material on the surface, even though its spinning side brushes help, to a small extent, to pull leaves into its maw.

On the floor of the pool, maximum running time is about 41/2 hours, courtesy of a 13,400 mAh battery—the same as the battery on the AquaSense 2 Ultra.

Image may contain Electronics Mobile Phone Phone and Text

ScreenshotBeatbot app via Chris Null

As with other AquaSense robots, a bevy of operating modes are available in the Beatbot app, letting you choose from dozens of potential combinations of floor, wall, waterline, and surface cleaning, each with up to two runs per zone and with various running times. An AI Quick Mode activates the onboard camera to allow the robot to actively search for debris instead of encountering it randomly; it’s good for a quick clean when there’s not much to pick up but more than you can easily fetch with a net.

Again, not much of this is any different from how the AquaSense 2 Ultra behaves, and aside from the poor surface performance, it works outstandingly well.

Charging and Cleaning

On to the main event: cleanup. After each run, the AquaSense X parked itself at the waterline to await retrieval, and I dutifully lugged it across the pool deck to where I had the AstroRinse station set up. While it can take a little trial and error to get the robot seated in just the right spot, once you do, the cleaning system kicks in automatically within a few seconds.

Video: Chris Null

As the rinsing system starts up, the top-mounted arm swings into place and connects with the mouth the robot uses for surface skimming. Then, a high-pressure stream of water (sounding quite loud) begins blasting from the arm and into the filter basket, which is positioned directly below this opening. The water spray runs uninterrupted for three minutes before the arm swings back and the system shuts off. (A quick mode, which runs for one minute, can also be selected in the app.) After that, the arm retracts and the unit is done. Debris is captured in a net-covered basket built into the base of the cleaning station. Any remaining water drains out through a mesh screen at the very bottom of the unit.

Image may contain Car Transportation and Vehicle

Photograph: Chris Null

#Pool #Robot #Cleans #Pooland #Cleansshopping,review,reviews,robots,home,outdoors">This Pool Robot Cleans the Pool—and Then Cleans ItselfPhotograph: Chris NullNaturally, the AstroRinse also needs a power supply, so if you don’t have a standard electrical outlet near your hose spigot, you’ll need another extension cord solution here. The unit must be level to run properly, and it features adjustable feet and a built-in spirit level to help you achieve that.All told, you’ll need to carefully consider where you’re going to place the AstroRinse, ensuring you have access to water, power, and drainage—and that the location isn’t too far from the pool. Since the AquaSense X robot itself weighs 29 pounds (and more when freshly pulled from the water), you probably don’t want to haul the thing halfway across the yard to clean and charge it. Unfortunately, given the availability of the above three services in my backyard, that’s exactly what I had to do.A Familiar Friend in the WaterThe Beatbot AquaSense X robot is nearly identical in appearance to the Beatbot AquaSense 2 Ultra except for some changes to the basket design (which is a single piece here instead of two). Setting it up is far simpler than the AstroRinse.Physical configuration involves installing two side brushes—these are used only by the skimmer function—but this is a fairly quick affair. Once the brushes are attached, the robot must be set on top of the AstroRinse cleaner so the two devices can be wirelessly paired together. (The quick start guide lays out the particular button presses you must do to complete this process; don’t lose it.) Lastly, the system must then be paired to the Beatbot mobile app; you’ll need Bluetooth and a 2.4 GHz or 5 GHz Wi-Fi connection to complete this task. One tiny hiccup I encountered: After completing all this work, both devices downloaded firmware updates, which promptly broke their pairing connection. It was easy to reestablish, however, by simply repeating the pairing process.Video: Chris NullAfter a full charge, I put the cleaner through its paces in the pool on both the floor and the surface, and as expected, I saw no real difference in performance against the AquaSense 2 Ultra. During floor testing with both organic and synthetic debris, the device picked up an average of 97 percent of the test material, doing exceptionally well on steps and platforms. On the surface, the unit was predictably middling to awful, collecting less than half of floating debris and sinking most of the rest. The unit is just too slow to collect much material on the surface, even though its spinning side brushes help, to a small extent, to pull leaves into its maw.On the floor of the pool, maximum running time is about 41/2 hours, courtesy of a 13,400 mAh battery—the same as the battery on the AquaSense 2 Ultra.ScreenshotBeatbot app via Chris NullAs with other AquaSense robots, a bevy of operating modes are available in the Beatbot app, letting you choose from dozens of potential combinations of floor, wall, waterline, and surface cleaning, each with up to two runs per zone and with various running times. An AI Quick Mode activates the onboard camera to allow the robot to actively search for debris instead of encountering it randomly; it’s good for a quick clean when there’s not much to pick up but more than you can easily fetch with a net.Again, not much of this is any different from how the AquaSense 2 Ultra behaves, and aside from the poor surface performance, it works outstandingly well.Charging and CleaningOn to the main event: cleanup. After each run, the AquaSense X parked itself at the waterline to await retrieval, and I dutifully lugged it across the pool deck to where I had the AstroRinse station set up. While it can take a little trial and error to get the robot seated in just the right spot, once you do, the cleaning system kicks in automatically within a few seconds.Video: Chris NullAs the rinsing system starts up, the top-mounted arm swings into place and connects with the mouth the robot uses for surface skimming. Then, a high-pressure stream of water (sounding quite loud) begins blasting from the arm and into the filter basket, which is positioned directly below this opening. The water spray runs uninterrupted for three minutes before the arm swings back and the system shuts off. (A quick mode, which runs for one minute, can also be selected in the app.) After that, the arm retracts and the unit is done. Debris is captured in a net-covered basket built into the base of the cleaning station. Any remaining water drains out through a mesh screen at the very bottom of the unit.Photograph: Chris Null#Pool #Robot #Cleans #Pooland #Cleansshopping,review,reviews,robots,home,outdoors

Beatbot AquaSense 2 Ultra except for some changes to the basket design (which is a single piece here instead of two). Setting it up is far simpler than the AstroRinse.

Physical configuration involves installing two side brushes—these are used only by the skimmer function—but this is a fairly quick affair. Once the brushes are attached, the robot must be set on top of the AstroRinse cleaner so the two devices can be wirelessly paired together. (The quick start guide lays out the particular button presses you must do to complete this process; don’t lose it.) Lastly, the system must then be paired to the Beatbot mobile app; you’ll need Bluetooth and a 2.4 GHz or 5 GHz Wi-Fi connection to complete this task. One tiny hiccup I encountered: After completing all this work, both devices downloaded firmware updates, which promptly broke their pairing connection. It was easy to reestablish, however, by simply repeating the pairing process.

Video: Chris Null

After a full charge, I put the cleaner through its paces in the pool on both the floor and the surface, and as expected, I saw no real difference in performance against the AquaSense 2 Ultra. During floor testing with both organic and synthetic debris, the device picked up an average of 97 percent of the test material, doing exceptionally well on steps and platforms. On the surface, the unit was predictably middling to awful, collecting less than half of floating debris and sinking most of the rest. The unit is just too slow to collect much material on the surface, even though its spinning side brushes help, to a small extent, to pull leaves into its maw.

On the floor of the pool, maximum running time is about 41/2 hours, courtesy of a 13,400 mAh battery—the same as the battery on the AquaSense 2 Ultra.

Image may contain Electronics Mobile Phone Phone and Text

ScreenshotBeatbot app via Chris Null

As with other AquaSense robots, a bevy of operating modes are available in the Beatbot app, letting you choose from dozens of potential combinations of floor, wall, waterline, and surface cleaning, each with up to two runs per zone and with various running times. An AI Quick Mode activates the onboard camera to allow the robot to actively search for debris instead of encountering it randomly; it’s good for a quick clean when there’s not much to pick up but more than you can easily fetch with a net.

Again, not much of this is any different from how the AquaSense 2 Ultra behaves, and aside from the poor surface performance, it works outstandingly well.

Charging and Cleaning

On to the main event: cleanup. After each run, the AquaSense X parked itself at the waterline to await retrieval, and I dutifully lugged it across the pool deck to where I had the AstroRinse station set up. While it can take a little trial and error to get the robot seated in just the right spot, once you do, the cleaning system kicks in automatically within a few seconds.

Video: Chris Null

As the rinsing system starts up, the top-mounted arm swings into place and connects with the mouth the robot uses for surface skimming. Then, a high-pressure stream of water (sounding quite loud) begins blasting from the arm and into the filter basket, which is positioned directly below this opening. The water spray runs uninterrupted for three minutes before the arm swings back and the system shuts off. (A quick mode, which runs for one minute, can also be selected in the app.) After that, the arm retracts and the unit is done. Debris is captured in a net-covered basket built into the base of the cleaning station. Any remaining water drains out through a mesh screen at the very bottom of the unit.

Image may contain Car Transportation and Vehicle

Photograph: Chris Null

#Pool #Robot #Cleans #Pooland #Cleansshopping,review,reviews,robots,home,outdoors">This Pool Robot Cleans the Pool—and Then Cleans Itself
Image may contain Adapter Electronics Escooter Transportation and Vehicle

Photograph: Chris Null

Naturally, the AstroRinse also needs a power supply, so if you don’t have a standard electrical outlet near your hose spigot, you’ll need another extension cord solution here. The unit must be level to run properly, and it features adjustable feet and a built-in spirit level to help you achieve that.

All told, you’ll need to carefully consider where you’re going to place the AstroRinse, ensuring you have access to water, power, and drainage—and that the location isn’t too far from the pool. Since the AquaSense X robot itself weighs 29 pounds (and more when freshly pulled from the water), you probably don’t want to haul the thing halfway across the yard to clean and charge it. Unfortunately, given the availability of the above three services in my backyard, that’s exactly what I had to do.

A Familiar Friend in the Water

The Beatbot AquaSense X robot is nearly identical in appearance to the Beatbot AquaSense 2 Ultra except for some changes to the basket design (which is a single piece here instead of two). Setting it up is far simpler than the AstroRinse.

Physical configuration involves installing two side brushes—these are used only by the skimmer function—but this is a fairly quick affair. Once the brushes are attached, the robot must be set on top of the AstroRinse cleaner so the two devices can be wirelessly paired together. (The quick start guide lays out the particular button presses you must do to complete this process; don’t lose it.) Lastly, the system must then be paired to the Beatbot mobile app; you’ll need Bluetooth and a 2.4 GHz or 5 GHz Wi-Fi connection to complete this task. One tiny hiccup I encountered: After completing all this work, both devices downloaded firmware updates, which promptly broke their pairing connection. It was easy to reestablish, however, by simply repeating the pairing process.

Video: Chris Null

After a full charge, I put the cleaner through its paces in the pool on both the floor and the surface, and as expected, I saw no real difference in performance against the AquaSense 2 Ultra. During floor testing with both organic and synthetic debris, the device picked up an average of 97 percent of the test material, doing exceptionally well on steps and platforms. On the surface, the unit was predictably middling to awful, collecting less than half of floating debris and sinking most of the rest. The unit is just too slow to collect much material on the surface, even though its spinning side brushes help, to a small extent, to pull leaves into its maw.

On the floor of the pool, maximum running time is about 41/2 hours, courtesy of a 13,400 mAh battery—the same as the battery on the AquaSense 2 Ultra.

Image may contain Electronics Mobile Phone Phone and Text

ScreenshotBeatbot app via Chris Null

As with other AquaSense robots, a bevy of operating modes are available in the Beatbot app, letting you choose from dozens of potential combinations of floor, wall, waterline, and surface cleaning, each with up to two runs per zone and with various running times. An AI Quick Mode activates the onboard camera to allow the robot to actively search for debris instead of encountering it randomly; it’s good for a quick clean when there’s not much to pick up but more than you can easily fetch with a net.

Again, not much of this is any different from how the AquaSense 2 Ultra behaves, and aside from the poor surface performance, it works outstandingly well.

Charging and Cleaning

On to the main event: cleanup. After each run, the AquaSense X parked itself at the waterline to await retrieval, and I dutifully lugged it across the pool deck to where I had the AstroRinse station set up. While it can take a little trial and error to get the robot seated in just the right spot, once you do, the cleaning system kicks in automatically within a few seconds.

Video: Chris Null

As the rinsing system starts up, the top-mounted arm swings into place and connects with the mouth the robot uses for surface skimming. Then, a high-pressure stream of water (sounding quite loud) begins blasting from the arm and into the filter basket, which is positioned directly below this opening. The water spray runs uninterrupted for three minutes before the arm swings back and the system shuts off. (A quick mode, which runs for one minute, can also be selected in the app.) After that, the arm retracts and the unit is done. Debris is captured in a net-covered basket built into the base of the cleaning station. Any remaining water drains out through a mesh screen at the very bottom of the unit.

Image may contain Car Transportation and Vehicle

Photograph: Chris Null

#Pool #Robot #Cleans #Pooland #Cleansshopping,review,reviews,robots,home,outdoors

Post Comment